Modeling of internally recycled material in fibreboard production facility as a tool for economic and environmental assessment

A rationale is presented for the wood fibre process modeling of internally recycled content in fibreboard production. Experimental studies were employed to obtain mathematical dependences in order to confirm the possibility of reusing wood fibre at various stages of the technological process. A wood fibre process model of internally recycled content was accrued out in which each processing stage was presented separately. Two methods for the preparation of wood fibre for reuse in fibreboard production were considered. To assess the effectiveness of the technologies proposed, the process modeling of internally recycled content was assessed from an economic and environmental point of view.

Carbon footprint of plastic from biomass and recycled feedstock: methodological insights

Purpose A circular (bio)economy is sustained through use of secondary raw material and biomass feedstock. In life cycle assessment (LCA), the approach applied to address the impact of these feedstocks is often unclear, in respect to both handling of the recycled content and End-of-Life recyclability and disposal. Further, the modelling approach adopted to account for land use change (LUC) and biogenic C effects is crucial to defining the impact of biobased commodities on global warming. Method We depart from state-of-the-art approaches proposed in literature and apply them to the case of non-biodegradable plastic products manufactured from alternative feedstock, focusing on selected polymers that can be made entirely from secondary raw material or biomass. We focus on global warming and the differences incurred by recycled content, recyclability, LUC, and carbon dynamics (effects of delayed emission of fossil C and temporary storage of biogenic C). To address the recycled content and recyclability, three formulas recently proposed are compared and discussed. Temporary storage of biogenic C is handled applying methods for dynamic accounting. LUC impacts are addressed by applying and comparing a biophysical, global equilibrium and a normative-based approach. These methods are applied to two case studies (rigid plastic for packaging and automotive applications) involving eight polymers. Results and discussion Drawing upon the results, secondary raw material is the feedstock with the lowest global warming impact overall. The results for biobased polymers, while promising in some cases (polybutylene succinate), are significantly affected by the formulas proposed to handle the recycled content and recyclability. We observe that some of the proposed formulas in their current form do not fully capture the effects associated with the biogenic nature of the material when this undergoes recycling and substitutes fossil materials. Furthermore, the way in which the recycled content is modelled is important for wastes already in-use. LUC factors derived with models providing a combined direct and indirect impact contribute with 15–30% of the overall life cycle impact, which in magnitude is comparable to the savings from temporary storage of biogenic C, when included. Conclusion End-of-Life formulas can be improved by addition of corrective terms accounting for the relative difference in disposal impacts between the recycled and market-substituted product. This affects the assessment of biobased materials. Inclusion of LUCs effects using economic/biophysical models in addition to (direct) LUC already embedded in commercial datasets may result in double-counting and should be done carefully. Dynamic assessment allows for detailed modelling of the carbon cycle, providing useful insights into the impact associated with biogenic C storage.