The Effect of CO Partial Pressure on Important Kinetic Parameters of Methanation Reaction on Co-Based FTS Catalyst Studied by SSITKA-MS and Operando DRIFTS-MS Techniques

A 20 wt% Co-0.05 wt% Pt/γ-Al2O3 catalyst was investigated to obtain a fundamental understanding of the effect of CO partial pressure (constant H2 partial pressure) on important kinetic parameters of the methanation reaction (x vol% CO/25 vol% H2, x = 3, 5 and 7) by performing advanced transient isotopic and operando diffuse reflectance infrared Fourier transform spectroscopy–mass spectrometry (DRIFTS-MS) experiments. Steady State Isotopic Transient Kinetic Analysis (SSITKA) experiments conducted at 1.2 bar, 230 °C after 5 h in CO/H2 revealed that the surface coverages, θCO and θCHx and the mean residence times, τCO, and τCHx (s) of the reversibly adsorbed CO-s and active CHx-s (Cα) intermediates leading to CH4, respectively, increased with increasing CO partial pressure. On the contrary, the apparent activity (keff, s−1) of CHx-s intermediates, turnover frequency (TOF, s−1) of methanation reaction, and the CH4-selectivity (SCH4, %) were found to decrease. Transient isothermal hydrogenation (TIH) following the SSITKA step-gas switch provided important information regarding the reactivity and concentration of active (Cα) and inactive -CxHy (Cβ) carbonaceous species formed after 5 h in the CO/H2 reaction. The latter Cβ species were readily hydrogenated at 230 °C in 50%H2/Ar. The surface coverage of Cβ was found to vary only slightly with increasing CO partial pressure. Temperature-programmed hydrogenation (TPH) following SSITKA and TIH revealed that other types of inactive carbonaceous species (Cγ) were formed during Fischer-Tropsch Synthesis (FTS) and hydrogenated at elevated temperatures (250–550 °C). The amount of Cγ was found to significantly increase with increasing CO partial pressure. All carbonaceous species hydrogenated during TIH and TPH revealed large differences in their kinetics of hydrogenation with respect to the CO partial pressure in the CO/H2 reaction mixture. Operando DRIFTS-MS transient isothermal hydrogenation of adsorbed CO-s formed after 2 h in 5 vol% CO/25 vol% H2/Ar at 200 °C coupled with kinetic modeling (H-assisted CO hydrogenation) provided information regarding the relative reactivity (keff) for CH4 formation of the two kinds of linear-type adsorbed CO-s on the cobalt surface.

Apparatus for efficient utilization of isotopically-labeled gases in pulse transient studies of heterogeneously catalyzed gas phase reactions

Transient techniques, such as steady state isotopic transient kinetic analysis (SSITKA), are powerful methods for determining various mechanistic and kinetic insights into heterogeneously catalyzed gas-phase reactions.

Novel catalytic and mechanistic studies on wastewater denitrification with hydrogen

The present work reports up-to-date information regarding the reaction mechanism of the catalytic hydrogenation of nitrates in water media. In the present mechanistic study, an attempt is made, for the first time, to elucidate the crucial role of several catalysts and reaction parameters in the mechanism of the NO3−/H2 reaction. Steady-state isotopic transient kinetic analysis (SSITKA) experiments coupled with ex situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) were performed on supported Pd-Cu catalysts for the NO3−/H2 and NO3−/H2/O2 reactions. The latter experiments revealed that the formation and surface coverage of various adsorbed active intermediate N-species on the support or Pd/Cu metal surface is significantly favored in the presence of TiO2 in the support mixture and in the presence of oxygen in the reaction's gaseous feed stream. The differences in the reactivity of these adsorbed N-species, found in the present work, adequately explain the large effect of the chemical composition of the support and the gas feed composition on catalyst behaviour (activity and selectivity). The present study leads to solid mechanistic evidence concerning the presence of a hydrogen spillover process from the metal to the support. Moreover, this study shows that Cu clusters are active sites for the reduction of nitrates to nitrites.