Computational Approach for the Fluid-Structure Interaction Design of Insect-Inspired Micro Flapping Wings

A flight device for insect-inspired flapping wing nano air vehicles (FWNAVs), which consists of the micro wings, the actuator, and the transmission, can use the fluid-structure interaction (FSI) to create the characteristic motions of the flapping wings. This design will be essential for further miniaturization of FWNAVs, since it will reduce the mechanical and electrical complexities of the flight device. Computational approaches will be necessary for this biomimetic concept because of the complexity of the FSI. Hence, in this study, a computational approach for the FSI design of insect-inspired micro flapping wings is proposed. This approach consists of a direct numerical modeling of the strongly coupled FSI, the dynamic similarity framework, and the design window (DW) search. The present numerical examples demonstrated that the dynamic similarity framework works well to make different two FSI systems with the strong coupling dynamically similar to each other, and this framework works as the guideline for the systematic investigation of the effect of characteristic parameters on the FSI system. Finally, an insect-inspired micro flapping wing with the 2.5-dimensional structure was designed using the proposed approach such that it can create the lift sufficient to support the weight of small insects. The existing area of satisfactory design solutions or the DW increases the fabricability of this wing using micromachining techniques based on the photolithography in the micro-electro-mechanical systems (MEMS) technology. Hence, the proposed approach will contribute to the further miniaturization of FWNAVs.

Nonlinear Aeroelastic Analysis for Highly Flexible Flapping Wing in Hover

Aeromechanics of highly flexible flapping wings is a complex nonlinear fluid–structure interaction problem and, therefore, cannot be analyzed using conventional linear aeroelasticity methods. This paper presents a standalone coupled aeroelastic framework for highly flexible flapping wings in hover for micro air vehicle (MAV) applications. The MAV-scale flapping wing structure is modeled using fully nonlinear beam and shell finite elements. A potential-flow-based unsteady aerodynamic model is then coupled with the structural model to generate the coupled aeroelastic framework. Both the structural and aerodynamic models are validated independently before coupling. Instantaneous lift force and wing deflection predictions from the coupled aeroelastic simulations are compared with the force and deflection measurements (using digital image correlation) obtained from in-house flapping wing experiments at both moderate (13 Hz) and high (20 Hz) flapping frequencies. Coupled trim analysis is then performed by simultaneously solving wing response equations and vehicle trim equations until trim controls, wing elastic response, inflow and circulation converge all together. The dependence of control inputs on weight and center of gravity (cg) location of the vehicle is studied for the hovering flight case.

Role of Active Morphing in the Aerodynamic Performance of Flapping Wings in Formation Flight

Migratory birds have the ability to save energy during flight by arranging themselves in a V-formation. This arrangement enables an increase in the overall efficiency of the group because the wake vortices shed by each of the birds provide additional lift and thrust to every member. Therefore, the aerodynamic advantages of such a flight arrangement can be exploited in the design process of micro air vehicles. One significant difference when comparing the anatomy of birds to the design of most micro air vehicles is that bird wings are not completely rigid. Birds have the ability to actively morph their wings during the flapping cycle. Given these aspects of avian flight, the objective of this work is to incorporate active bending and torsion into multiple pairs of flapping wings arranged in a V-formation and to investigate their aerodynamic behavior using the unsteady vortex lattice method. To do so, the first two bending and torsional mode shapes of a cantilever beam are considered and the aerodynamic characteristics of morphed wings for a range of V-formation angles, while changing the group size in order to determine the optimal configuration that results in maximum propulsive efficiency, are examined. The aerodynamic simulator incorporating the prescribed morphing is qualitatively verified using experimental data taken from trained kestrel flights. The simulation results demonstrate that coupled bending and twisting of the first mode shape yields the highest propulsive efficiency over a range of formation angles. Furthermore, the optimal configuration in terms of propulsive efficiency is found to be a five-body V-formation incorporating coupled bending and twisting of the first mode at a formation angle of 140 degrees. These results indicate the potential improvement in the aerodynamic performance of the formation flight when introducing active morphing and bioinspiration.