End-effector Cartesian stiffness shaping - sequential least squares programming approach

Control of robot end-effector (EE) Cartesian stiffness matrix (or the whole mechanical impedance) is still a challenging open issue in physical humanrobot interaction (pHRI). This paper presents an optimization approach for shaping the robot EE Cartesian stiffness. This research targets collaborative robots with intrinsic compliance - serial elastic actuators (SEAs). Although robots with SEAs have constant joint stiffness, task redundancy (null-space) for a specific task could be used for robot reconfiguration and shaping the stiffness matrix while still keeping the EE position unchanged. The method proposed in this paper to investigate null-space reconfiguration's influence on Cartesian robot stiffness is based on the Sequential Least Squares Programming (SLSQP) algorithm, which presents an expansion of the quadratic programming algorithm for nonlinear functions with constraints. The method is tested in simulations for 4 DOF planar robot. Results are presented for control of the EE Cartesian stiffness initially along one axis, and then control of stiffness along both planar axis - shaping the main diagonal of the EE stiffness matrix.

A Non-Linear Stiffness Model for Serial and Parallel Manipulators

The paper presents a methodology to enhance the stiffness analysis of serial and parallel manipulators with passive joints. It directly takes into account the loading influence on the manipulator configuration and, consequently, on its Jacobians and Hessians. The main contributions of this paper are the introduction of a non-linear stiffness model for the manipulators with passive joints, a relevant numerical technique for its linearization and computing of the Cartesian stiffness matrix which allows rank-deficiency. Within the developed technique, the manipulator elements are presented as pseudo-rigid bodies separated by multidimensional virtual springs and perfect passive joints. Simulation examples are presented that deal with parallel manipulators of the Ortholide family and demonstrate the ability of the developed methodology to describe non-linear behaviour of the manipulator structure such as a sudden change of the elastic instability properties (buckling).

Stiffness analysis and comparison of a Biglide parallel grinder with alternative spatial modular parallelograms

SUMMARYThis paper deals with the stiffness modeling, analysis and comparison of a Biglide parallel grinder with two alternative modular parallelograms. It turns out that the Cartesian stiffness matrix of the manipulator has the property that it can be decoupled into two homogeneous matrices, corresponding to the translational and rotational aspects, through which the principal stiffnesses and the associated directions are identified by means of the eigenvalue problem, allowing the evaluation of the translational and rotational stiffness of the manipulator either at a given pose or the overall workspace. The stiffness comparison of the two alternative Biglide machines reveals the (dis)advantages of the two different spatial modular parallelograms.