Hydrogen Production From Steam Gasification of Palm Kernel Shell Using Sequential Impregnation Bimetallic Catalysts

Zeolite β supported bimetallic Fe and Ni catalysts have been prepared using sequential impregnation method and calcined at temperatures between 500-700 ºC. The catalytic activity of these catalysts in a steam gasification of palm kernel shell was tested in a fixed-bed quartz micro-reactor at 700 ºC. Both Fe and Ni active metals present in FeNi/BEA and NiFe/BEA catalysts are corresponding to Fe2O3 and NiO. Different calcination temperatures and different sequence in metal addition have a significant effect to the catalytic activity where FeNi/BEA (700) shows the highest hydrogen produced than other catalysts.

Structure and Activity of Ni2P/Desilicated Zeolite β Catalysts for Hydrocracking of Pyrolysis Fuel Oil into Benzene, Toluene, and Xylene

The effects of desilication (DS) of the zeolite β on the hydrocracking of polycyclic aromatics were investigated using the Ni2P/β catalysts. The Ni2P/β catalysts were obtained by the temperature-programmed reduction (TPR) method, and the physical and chemical properties were examined by N2 physisorption, X-ray diffraction (XRD), 27Al magic angle spinning–nuclear magnetic resonance (27Al MAS NMR), extended X-ray absorption fine structure (EXAFS), isopropyl amine (IPA) and NH3 temperature-programmed desorption (TPD), CO uptake, and thermogravimetric analysis (TGA). The catalytic activity was examined at 653 K and 6.0 MPa in a continuous fixed bed reactor for the hydrocracking (HCK) of model compounds of 1-methylnaphthalene (1-MN) and phenanthrene or a real feedstock of pyrolysis fuel oil (PFO). Overall, the Ni2P/DS-β was observed as more active and stable in the hydrocracking of polycyclic aromatics than the Ni2P/β catalyst. In addition, the Ni2P/β suffered from the coke formation, while the Ni2P/DS-β maintained the catalytic stability, particularly in the presence of large polycyclic hydrocarbons in the feed.

Enhancement of HDO Activity of MoP/SiO2 Catalyst in Physical Mixture with Alumina or Zeolites

Catalytic properties of physical mixture of MoP/SiO2 catalyst with SiC, γ-Al2O3, SAPO-11 and zeolite β have been compared in hydrodeoxygenation of methyl palmitate (MP). MoP/SiO2 catalyst (11.5 wt% of Mo, Mo/P = 1) was synthesized using TPR method and characterized with N2 physisorption, elemental analysis, H2-TPR, XRD and TEM. Trickle-bed reactor was used for catalytic properties investigation at hydrogen pressure of 3 MPa, and 290 °C. The conversions of MP and overall oxygen-containing compounds have been increased significantly (from 59 to about 100%) when γ-Al2O3 or zeolite materials were used instead of inert SiC. MP can be converted to palmitic acid through acid-catalyzed hydrolysis along with metal-catalyzed hydrogenolysis, and as a consequence the addition of material possessing acid sites to MoP/SiO2 catalyst could lead to acceleration of MP hydrodeoxygenation through acid-catalyzed reactions. Isomerization and cracking of alkane were observed over the physical mixture of MoP/SiO2 with zeolites, but the selectivity of MP conversion trough the HDO reaction route is remained on the high level exceeding 90%.

Comparative Studies of Fischer-Tropsch Synthesis on Iron Catalysts Supported on Al2O3-Cr2O3 (2:1), Multi-Walled Carbon Nanotubes or BEA Zeolite Systems

The main goal of the presented paper is to study the influence of a range of support materials, i.e., multi-walled carbon nanotubes (MWCNTs), Al2O3-Cr2O3 (2:1), zeolite β-H and zeolite β-Na on the physicochemical and catalytic properties in Fischer-Tropsch (F-T) synthesis. All tested Fe catalysts were synthesized using the impregnation method. Their physicochemical properties were extensively investigated using various characterization techniques such as the Temperature-Programmed Reduction of hydrogen (TPR-H2), X-ray diffraction, Temperature-Programmed Desorption of ammonia (TPD-NH3), Temperature-Programmed Desorption of carbon dioxide (TPD-CO2), Fourier transform infrared spectrometry (FTIR), Brunauer Emmett Teller method (BET) and Thermogravimetric Differential Analysis coupled with Mass Spectrometer (TG-DTA-MS). Activity tests were performed in F-T synthesis using a high-pressure fixed bed reactor and a gas mixture of H2 and CO (50% CO and 50% H2). The correlation between the physicochemical properties and reactivity in F-T synthesis was determined. The highest activity was from a 40%Fe/Al2O3-Cr2O3 (2:1) system which exhibited 89.9% of CO conversion and 66.6% selectivity toward liquid products. This catalyst also exhibited the lowest acidity, but the highest quantity of iron carbides on its surface. In addition, in the case of iron catalysts supported on MWCNTs or a binary oxide system, the smallest amount of carbon deposit formed on the surface of the catalyst during the F-T process was confirmed.