Multimodal Non-Contact Luminescence Thermometry with Cr-Doped Oxides

Luminescence methods for non-contact temperature monitoring have evolved through improvements of hardware and sensor materials. Future advances in this field rely on the development of multimodal sensing capabilities of temperature probes and extend the temperature range across which they operate. The family of Cr-doped oxides appears particularly promising and we review their luminescence characteristics in light of their application in non-contact measurements of temperature over the 5–300 K range. Multimodal sensing utilizes the intensity ratio of emission lines, their wavelength shift, and the scintillation decay time constant. We carried out systematic studies of the temperature-induced changes in the luminescence of the Cr3+-doped oxides Al2O3, Ga2O3, Y3Al5O12, and YAlO3. The mechanism responsible for the temperature-dependent luminescence characteristic is discussed in terms of relevant models. It is shown that the thermally-induced processes of particle exchange, governing the dynamics of Cr3+ ion excited state populations, require low activation energy. This then translates into tangible changes of a luminescence parameter with temperature. We compare different schemes of temperature sensing and demonstrate that Ga2O3-Cr is a promising material for non-contact measurements at cryogenic temperatures. A temperature resolution better than ±1 K can be achieved by monitoring the luminescence intensity ratio (40–140 K) and decay time constant (80–300 K range).

Growth and Scintillation Properties of Directionally Solidified Ce:LaBr3/AEBr2 (AE = Mg, Ca, Sr, Ba) Eutectic System

Ce-doped LaBr3/AEBr2 (AE = Mg, Ca, Sr, Ba) eutectics were grown using the Bridgman–Stockbarger (BS) method in quartz ampoules. The eutectics (AE = Mg and Ca) showed optical transparency like optical fiber bundles. A grown Ce-doped LaBr3/MgBr2 eutectic shows a 355 nm emission ascribed to Ce3+ 4f-5d transition under X-ray excitation. The smaller the ionic size of AE, the higher the light yield of the sample was. The light yield of Ce:LaBr3/MgBr2 was 34,300 photon/MeV, which is higher than Ce:LYSO standard. Scintillation decay time under 662 keV gamma-ray excitation was 18.8 ns.

Influence of the scintillation crystal option on the detector response of pet devices

Positron emission tomography is a technology that provides unique and exquisite possibilities in functional diagnostics, in the sense that it is the most efficient and most reliable method for obtaining information about biochemical activity and cellular metabolism in the body, by determining exact localization and performing semi-quantitative assessment of the distribution of a radioactive tracer. This paper compares the characteristics of recently introduced lutetium based crystals to those of conventionally used bismuth-ortho-germanate scintillators; both options are used as scintillation detectors within the positron emission tomography systems. Energy resolution and scintillation decay time of lutetium based crystals and bis-muth-ortho-germanate crystals was experimentally tested. Main scintillation detector parameters which affect the resulting detector response are considered and analyzed, since they serve as the basis for a positron emission tomography medical image.