Pairwise Registration Algorithm for Large-Scale Planar Point Cloud Used in Flatness Measurement

In this paper, an optimized three-dimensional (3D) pairwise point cloud registration algorithm is proposed, which is used for flatness measurement based on a laser profilometer. The objective is to achieve a fast and accurate six-degrees-of-freedom (6-DoF) pose estimation of a large-scale planar point cloud to ensure that the flatness measurement is precise. To that end, the proposed algorithm extracts the boundary of the point cloud to obtain more effective feature descriptors of the keypoints. Then, it eliminates the invalid keypoints by neighborhood evaluation to obtain the initial matching point pairs. Thereafter, clustering combined with the geometric consistency constraints of correspondences is conducted to realize coarse registration. Finally, the iterative closest point (ICP) algorithm is used to complete fine registration based on the boundary point cloud. The experimental results demonstrate that the proposed algorithm is superior to the current algorithms in terms of boundary extraction and registration performance.

Collaboration Strategy Based on Conflict Resolution for Flatness Actuator Group

During the flatness control process, there are frequently some uncoordinated regulating behaviors in the flatness actuator group. This has a bad influence on the flatness control accuracy and the flatness control efficiency. Therefore, a collaboration strategy based on conflict resolution for the flatness actuator group has been proposed in this paper. First of all, the feature of flatness measurement value is extracted through establishing the actual flatness condition discriminating factor. After that, the coordination cooperation that is appropriate to the actual flatness condition is developed for the flatness actuator group. Finally, the optimal adjustment of the actuator population is solved by the coordinated algorithm of Topkis-Veinott and genetic algorithm collaborative optimization. The collaboration strategy proposed in this paper has been successfully applied to a flatness control system of a 1450 mm five-stand cold rolling mill.