Parameters to characterize the internal recirculation of an oxidation ditch

Mixed liquor circulates ceaselessly in the closed-loop corridor in an oxidation ditch (OD), which is significantly different from other wastewater treatment processes. The internal recirculation ratio (IRR), i.e., the ratio between circulation flow rate (QCC) and influent flow rate (QIn), and the circulatory period (T), i.e. the time consumed for the mixed liquor to complete one lap in the circular corridor, was used to quantify the internal recirculation characteristics of the OD system. In order to elucidate the characteristics and applicability of IRR and T, this study obtained the numerical relationship between IRR and T by formula derivation. It also discusses the factors influencing IRR and analyses the applications of IRR and T. The results showed that IRR = QCC/QIn = HRT/T = HRT ž IRF (HRT = hydraulic retention time of the mixed liquor in the circular corridor; IRF = internal recirculation frequency). Moreover, three kinds of parameters had an effect on IRR: QIn; reactor dimensions, i.e., length (Lmid), width (B), and height (H) of the circular corridor; and horizontal velocity of the mixed liquor in the circular corridor (v). QIn changed IRR by altering HRT. However, B, H, Lmid, and v changed IRR by altering IRF and T. Furthermore, the same IRR corresponded to many different HRT and IRF. Therefore, when QIn and QCC varied in the OD system, using HRT and IRF to evaluate the variation of QIn and QCC, respectively, was better than using IRR to evaluate their synthetical variation. IRF and T were useful for directly and precisely characterizing the circulation speed and circulation flow rate in the circular corridor, while IRR was more useful for evaluating the dilution effect of reflux on influent.

Particular internal recirculation frequency scope for enhancing denitrifying phosphorus removal in an oxidation ditch

This study investigated the influence of the unique internal recirculation characteristics of an oxidation ditch (OD) system, namely, the internal recirculation frequency (IRF) on denitrifying phosphorus removal (DNPR). The ratios of denitrifying polyphosphate-accumulating organisms (DPAOs) to polyphosphate-accumulating organisms (PAOs) under different IRF conditions were measured using a batch experiment. On this basis, the variation of nutrient transformations were studied using the IRF changes by the mass balance method. The results showed that for the OD system that had an anaerobic zone upstream from the circular corridor and set anoxic and aerobic zones along the circular corridor, when the IRF was between 3.4 h−1 and 7.5 h−1, the DPAOs/PAOs ratio reached about 50%. Approximately 20% of the total phosphorus (TP) was removed and over 11% of the total nitrogen (TN) was transformed into nitrogen gas by the DNPR process, and meanwhile the total removal efficiencies of the TP and TN were over 93% and 80%. When the IRF was greater than 11.5 h−1, the TN removal efficiency decreased significantly, and this was not conducive to simultaneous nitrogen and phosphorus removal. The results indicated that OD process would possess a better DNPR potential if the IRF was controlled within the proper scope.

Hydrodynamic Light Flashing in Thin Layer Wavy Photobioreactors

In a thin-volume photobioreactor where a concentrated suspension of microalgae is circulated throughout the established spatial irradiance gradient, microalgal cells experience a time-variable irradiance. Deploying this feature is the most convenient way of obtaining the so-called “flashing light” effect, improving biomass production in high irradiance. This work investigates the light flashing features of sloping wavy photobioreactors, a recently proposed type, by introducing and validating a Computational Fluid Dynamics model. Two characteristic flow zones (straight top-bottom stream and local recirculation stream), both effective toward light flashing, have been found and characterised: a recirculation-induced frequency of 3.7 Hz and straight flow-induced frequency of 5.6 Hz were estimated. If the channel slope is increased, the recirculation area becomes less stable while the recirculation frequency is nearly constant with flow rate. The validated CFD model is a mighty tool that could be reliably used to further increase the flashing frequency by optimising the design, the dimensions, the installation and the operational parameters of the sloping wavy photobioreactor.

Very Flat Optical Frequency Comb Generation based on Polarization Modulator and Recirculation Frequency Shifter

We propose and experimentally demonstrate a novel scheme to generate a flat and stable optical frequency comb by using recirculation frequency shifter (RFS) loop and polarization-modulator based single-side-band modulator (PSSBM). An ultra-flat 5-carriers generated by a polarization modulator is set as the seed light source of the recirculating loop, and the recirculation times is greatly reduced compared with the regular scheme based on RFS. Through theoretical analysis and experiment simulations, it is shown that the optical frequency comb of high quality with 50 spectral lines and the flatness fluctuation of less than 1 dB can be achieved.