Substation Secondary Cable Path Optimization Design Based on 3D Simulation and Improved Dijkstra Algorithm

In order to accurately predict the length of secondary cable laying in substation construction project and avoid the problem of resource waste in engineering construction, a secondary cable path optimization model based on 3D simulation and Dijkstra algorithm was established. Firstly, through the application of Bentley software, the three-dimensional model of substation is established, and the workflow of BRCM cable laying software is introduced. Secondly, the common and the improved Dijkstra algorithm are used to carry out the path planning on the raster map respectively, and the experimental simulation is carried out. Finally, the simulation results show that the path length of the improved algorithm is 24.32% and 28.66% less than that of the traditional Dijkstra. It is 12.34% less than that of the ant colony algorithm, which provides some useful theoretical references for the secondary cable laying in the future substations.

Simulation of peak tension loads in Subsea power cables during installation

At present, most of the insurance claims in the offshore wind industry are due to cable failures where a large percentage occurs during the installation of the array and export cables. As the reliability of the cables depends on the location and installation method, it is important to map the risks involved, which can compromise the cable’s integrity in individual projects. This paper presents sensitivity analyses conducted on crucial parameters in the cable laying process, with an objective of successful installation of subsea power cables without any damages to the cable. The analyses focus on the peak tension loads with reference to key parameters as cable self-weight and laying geometry, as well as the cable deployment position on the installation vessel. Finite element analyses were conducted with both static forces and dynamic forces for irregular vessel motions, by the aid of the well-tested software OrcaFlex.

COMPATIBILITY OF INDONESIA’S REGULATIONS ON SUBMARINE CABLE WITH UNCLOS 1982

The special status of Exclusive Economic Zone of Indonesia (EEZ) raises a problem particularly related to the submarine cable laying activities. This study aims to analyze the compatibility of the marine location permit instrument under Law No. 32/2014 on Marine Affairs and Government Regulation No. 32/2019 on National Marine Spatial Planning (MSP) with UNCLOS 1982 in regulating submarine cable in the EEZ. This normative research shows that the marine location permit instrument regulating submarine cable laying activity in EEZ is incompatible with the provisions of UNCLOS 1982. In contrast, the MSP instrument is compatible and a suitable instrument to protect Indonesia's interests in the EEZ. The Government of Indonesia is advised to regulate an exemption clause for submarine cable installation in EEZ in the Draft of Government Regulation on Marine Location Permit; formulate and formalize ‘prior notification’ procedures by other countries in submarine cable laying activities in EEZ into laws and regulations; and publish the Government Regulation on Marine Spatial Planning and its annexes through the channels of relevant international organizations such as International Cable Protection Committee (ICPC) and Intergovernmental Oceanographic Commission (IOC).

Numerical simulation of underwater cable laying with account of non-uniform hydrostatic force at Arctic basin condition

Статья посвящена моделированию динамического равновесия установившегося движения протяженной кабельной линии с учетом действия гидродинамических сил сопротивления и неоднородной гидростатической силы. Учитывая различные условия и глубины укладки, а также требования функционального назначения и защиты от враждебных факторов морского дна, необходимо рассмотреть широкий диапазон кабелей с различными механическими характеристиками: трехжильный кабель с одиночным бронированием 2XS2YRAA, одножильный кабель с одиночным бронированием ZS-YJQ41 и одножильный кабель с двойным бронированием – аналог GASLMLTV. Целью работы является развитие цифровой технологии по моделированию укладки подводных коммуникационных и силовых кабелей, позволяющей учитывать многочисленные физико-механические явления, имеющие место при проведении реальных морских работ. Для достижения поставленной цели работы используется программная среда Matlab Math Works с использованием разработанного комплекса программ для инженерной оценки формы и натяжения провисающего участка кабеля. Научная новизна состоит в апробации модели подводной укладки кабеля, учитывающей действие неоднородной гидростатической силы. Результаты моделирования представлены в виде формы и натяжения провисающей части кабеля при различных углах схода кабеля с движущегося судна при различных механических параметрах кабелей. Практическое значение работы состоит в повышении эффективности освоения перспективных месторождений, путем определения характеристик укладки кабеля в условиях Арктического бассейна: газовое месторождение Лудловское, газоконденсатное месторождение Ленинградское, нефтяное месторождение Медынское-море. This article studies the numerical simulation of underwater steady motion of the cable line with account of hydrodynamic water resistance forces and non-uniform hydrostatic force. It is necessary to consider distinctive types of cables due to various depths, laying conditions, functional requirements and protection requirements against adverse factors of seabed. Three-core single armoured cable 2XS2YRAA, one-core single armoured cable ZS-YJQ41 and one-core double armoured cable – analogue GASLMLTV are considered in this article. The aim of the research consists in digital technology development for underwater cable laying modeling, which allows taking into account numerous physical and mechanical features. These features occur during real marine operations for communication and power cables. Programming and numeric computing platform Matlab Math Works with developed software package is chosen as the research method. Simulation results are presented in dimensionless form for cable shape and tension for engineering purposes. The novelty of the work consists in approbation of underwater cable laying analytical model considering non-uniform hydrostatic force. Simulation results are presented for underwater cable laying during reeling from spool mounted on the vessel, moving with constant speed for distinctive types of cables. The influence of the cable run-off angle on the investigated characteristics was also considered. The practical value of the research consists in increasing of efficiency of exploration of oil, gas and condensate fields by determining underwater cable laying characteristics for perspective fields. At the end of the paper, the results of estimation of the shape and tension of the cable being laid undersea were presented for several fields at Arctic basin condition: gas field Ludlovskoe, condensate field Leningradskoe and oil field Medinskoe sea.