Flap Design in Endodontic Microsurgery

2017 ◽  
pp. 49-56
Author(s):  
Francesco Maggiore ◽  
Frank Setzer
FACE ◽  
2021 ◽  
pp. 273250162199390
Author(s):  
Daniel Henick ◽  
Kelvin K. Ampem-Darko ◽  
Farah Sayegh ◽  
Paymon Sanati-Mezrahi ◽  
Mehul Bhatt ◽  
...  

Background: Reconstruction of the nose can be difficult due to its complex anatomical features. In 1989, Zitelli described a modified version of the bilobed flap design technique using 45° and 90° angles to improve nasal reconstructions. While the bilobed flap is still frequently referenced in scholarly literature, there seems to be inconsistency in preoperative flap design; these deviations can lead to suboptimal outcomes. The authors aim to illustrate the variability in bilobed flap execution and provide guidelines in preoperative design to improve consistency. Methods: A geometrically-based approach was used to characterize the inconsistency of bilobed repair technique. The pre-operative design images from fifteen scholarly articles were analyzed via a series of measurements and computations to quantify the angle of rotation and dimensions for the primary and secondary lobes. The “Error Quotient” was a calculated ratio that objectively measured the extent to which a bilobed design deviated from Zitelli’s specifications. Results: There was a noticeable variability in the design of both the primary and secondary lobes. Bilobed designs with smaller angles of rotation, particularly of the first lobe, were associated with higher Error Quotients and greater amounts of deviation from Zitelli’s design. Designs with the smallest Error Quotients had a primary lobe rotation that approached 45°. Conclusion: Consistency of application of the bilobed flap should be established to allow for optimal results, particularly with emphasis on design of the primary lobe. This can be accomplished by including a disposable protractor and marker in their sterile kit to measure a 45° rotation.


Author(s):  
Nanda Kishore Sahoo ◽  
Ankur Thakral ◽  
Sanjay Kumar ◽  
Vishal Kulkarni
Keyword(s):  

2020 ◽  
Vol 34 (03) ◽  
pp. 145-151
Author(s):  
Shimpei Ono ◽  
Hiroyuki Ohi ◽  
Rei Ogawa

AbstractSince propeller flaps are elevated as island flaps and most often nourished by a single perforator nearby the defect, it is challenging to change the flap design intraoperatively when a reliable perforator cannot be found where expected to exist. Thus, accurate preoperative mapping of perforators is essential in the safe planning of propeller flaps. Various methods have been reported so far: (1) handheld acoustic Doppler sonography (ADS), (2) color duplex sonography (CDS), (3) perforator computed tomographic angiography (P-CTA), and (4) magnetic resonance angiography (MRA). To facilitate the preoperative perforator assessment, P-CTA is currently considered as the gold standard imaging tool in revealing the three-dimensional anatomical details of perforators precisely. Nevertheless, ADS remains the most widely used tool due to its low cost, faster learning, and ease of use despite an undesirable number of false-positive results. CDS can provide hemodynamic characteristics of the perforator and is a valid and safer alternative particularly in patients in whom ionizing radiation and/or contrast exposure should be limited. Although MRA is less accurate in detecting smaller perforators of caliber less than 1.0 mm and the intramuscular course of perforators at the present time, MRA is expected to improve in the future due to the recent developments in technology, making it as accurate as P-CTA. Moreover, it provides the advantage of being radiation-free with fewer contrast reactions.


Author(s):  
Christopher C.K. Ho ◽  
David Attia ◽  
Jess Liu

Author(s):  
Muhtada Ahmad ◽  
Zafar Ali Khan ◽  
Tahir Ullah Khan ◽  
Montaser N. Alqutub ◽  
Sameer A. Mokeem ◽  
...  

The aim of the study was to assess the influence of flap designs (Envelope flap (EF) and Szmyd flap (SF)) for impacted mandibular third molar extraction, on periodontal pocket depth (PPD), clinical attachment loss (CAL) and bone levels (BL) of second molar. Sixty patients indicated for third molar extractions with healthy second molars were allocated into two groups: EF and SF (n = 30). Third molars were assessed for angulation, root patterns, depth of impactions and relation with ramus (Pell and Gregory classification). Extraction of third molars was performed and PPD, CAL and BL around second molars at 0, 3 and 6 month (mon) follow-ups (FU) were assessed clinically and radiographically. ANOVA, Chi-square and Fisher’s exact test were employed to compare periodontal factors between EF and SF groups, considering p ≤ 0.05 as significant. Sixty participants with a mean age of 23.22 ± 3.17 were included in the study. Based on angulation, the most common impaction in the EF and SF groups was mesio-angular (EF, 50%; SF, 36.7%). Buccal and distal PPD showed a significant increase (p < 0.001) in both EF and SF patients from baseline to 6 mon. EF patients showed significantly higher distal and buccal CAL (6.67 ± 0.18 mm; 6.91 ± 0.17 mm) and BL (7.64 ± 0.16 mm; 7.90 ± 0.15 mm) as compared to SF patients (CAL, 6.76 ± 0.26 mm; 6.91 ± 0.17 mm-BL, 7.42 ± 0.38 mm; 7.34 ± 0.34 mm) at 6 mon FU. SF showed better soft tissue attachment (PPD and CAL) and bone stability (less bone loss) around second molars compared to EF after third molar extractions regardless of the patient, tooth and operator factors.


2005 ◽  
Vol 115 (2) ◽  
pp. 656-657 ◽  
Author(s):  
Mohammed G. Ellabban ◽  
Deemesh Oudit ◽  
Ali Juma
Keyword(s):  

Medicina ◽  
2021 ◽  
Vol 57 (3) ◽  
pp. 270
Author(s):  
Sun Mi Jang ◽  
Euiseong Kim ◽  
Kyung-San Min

Endodontic microsurgery is a highly predictable treatment option in most cases when conventional endodontic treatment is not feasible. Nevertheless, mandibular molars are still considered by clinicians to be the most difficult type of teeth, with the lowest success rate. In recent years, endodontic microsurgery has been attempted more frequently with the emergence of modern cutting-edge technologies such as dental operating microscopes, various microsurgical instruments, and biocompatible materials, and the success rate is increasing. This review describes the current state of the art in endodontic microsurgical techniques and concepts for mandibular molars. Notably, this review highlights contemporary equipment, technology, and materials.


1979 ◽  
Vol 87 (4) ◽  
pp. 491-496 ◽  
Author(s):  
Charles J. Krause

Few procedures offer the surgeon a greater opportunity to exercise his surgical and aesthetic judgement than the design and implementation of local flaps about the head and neck. Considerations include skin color and texture match; adequacy of flap blood supply; size, location, and characteristics of the donor site defect; functional capability of the proposed flap; nature of skin tension lines created; and number of surgical procedures required. A systematic approach to local flap design and implementation is presented, and illustrations of the geometric principles involved are included.


1994 ◽  
Vol 19 (6) ◽  
pp. 794-795 ◽  
Author(s):  
H. D. SKOFF

Appropriate skin flap design is crucial for success in surgery of the hand. Practice models are useful in acquiring surgical experience. The author describes a three-dimensional model composed of readily available materials which has been useful for practice in elevation of local skin flaps in the hand


Sign in / Sign up

Export Citation Format

Share Document