Manipulation and Mixing of 200 Femtoliter Droplets in Nanofluidic Channels Using MHz‐Order Surface Acoustic Waves

Arising from an interplay between capillary, acoustic and intermolecular forces, surface acoustic waves (SAWs) are observed to drive a unique and curious double flow reversal in the spreading of thin films. With a thickness at or less than the submicrometre viscous penetration depth, the film is seen to advance along the SAW propagation direction, and self-similarly over time t 1/4 in the inertial limit. At intermediate film thicknesses, beyond one-fourth the sound wavelength λ ℓ in the liquid, the spreading direction reverses, and the film propagates against the direction of the SAW propagation. The film reverses yet again, once its depth is further increased beyond one SAW wavelength. An unstable thickness region, between λ ℓ /8 and λ ℓ /4, exists from which regions of the film either rapidly grow in thickness to exceed λ ℓ /4 and move against the SAW propagation, consistent with the intermediate thickness films, whereas other regions decrease in thickness below λ ℓ /8 to conserve mass and move along the SAW propagation direction, consistent with the thin submicrometre films.

Download Full-text

Enhancing greywater treatment via MHz-Order surface acoustic waves

Water Research ◽

10.1016/j.watres.2019.115187 ◽

2020 ◽

Vol 169 ◽

pp. 115187 ◽

Cited By ~ 1

Author(s):

Jing S. Chan ◽

Phaik E. Poh ◽

Mohd-Zulhilmi P. Ismadi ◽

Leslie Y. Yeo ◽

Ming K. Tan

Keyword(s):

Acoustic Waves ◽

Surface Acoustic Waves ◽

Order Surface

Download Full-text

MHz-Order Surface Acoustic Wave Thruster for Underwater Silent Propulsion

Micromachines ◽

10.3390/mi11040419 ◽

2020 ◽

Vol 11 (4) ◽

pp. 419

Author(s):

Naiqing Zhang ◽

Yue Wen ◽

James Friend

Keyword(s):

Acoustic Waves ◽

Power Efficiency ◽

Acoustic Radiation ◽

Surface Acoustic Waves ◽

Acoustic Streaming ◽

Input Power ◽

Image Velocimetry ◽

Underwater Propulsion ◽

Propulsion Force ◽

Order Surface

High frequency (MHz-order) surface acoustic waves (SAW) are able to generate intense fluid flow from the attenuation of acoustic radiation in viscous fluids as acoustic streaming. Though such flows are known to produce a force upon the fluid and an equivalent and opposing force upon the object producing the acoustic radiation, there is no convenient method for measuring this force. We describe a new method to accomplish this aim, noting the potential of these devices in providing essentially silent underwater propulsion by virtue of their use of the sound itself to generate fluid momentum flux. Our example employs a 40 MHz SAW device as a pendulum bob while immersed in a fluid, measuring a 1.5 mN propulsion force from an input power of 5 W power to the SAW device. Supporting details regarding the acoustic streaming profile via particle image velocimetry and an associated theoretical model are provided to aid in the determination of the propulsion force knowing the applied power and fluid characteristics. Finally, a simple model is provided to aid the selection of the acoustic device size to maximize the propulsion force per unit device area, a key figure of merit in underwater propulsion devices. Using this model, a maximum force of approximately 10 mN/cm 2 was obtained from 1 W input power using 40 MHz SAW in water and producing a power efficiency of approximately 50%. Given the advantages of this technology in silent propulsion with such large efficiency and propulsion force per unit volume, it seems likely this method will be beneficial in propelling small autonomous submersibles.

Download Full-text

Characterization of RF Sputtered ZnO Piezoelectric Films Using Transmission Electron Microscope

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100114050 ◽

1975 ◽

Vol 33 ◽

pp. 86-87

Author(s):

Kemining W. Yeh ◽

Richard S. Muller ◽

Wei-Kuo Wu ◽

Jack Washburn

Keyword(s):

Integrated Circuit ◽

Acoustic Waves ◽

New Technology ◽

Surface Acoustic Waves ◽

Electromechanical Properties ◽

Leading Role ◽

Saw Devices ◽

Transmission Electron ◽

High Degree

Considerable and continuing interest has been shown in the thin film transducer fabrication for surface acoustic waves (SAW) in the past few years. Due to the high degree of miniaturization, compatibility with silicon integrated circuit technology, simplicity and ease of design, this new technology has played an important role in the design of new devices for communications and signal processing. Among the commonly used piezoelectric thin films, ZnO generally yields superior electromechanical properties and is expected to play a leading role in the development of SAW devices.

Download Full-text