Nanoindentation of lemur enamel: An ecological investigation of mechanical property variations within and between sympatric species

2012 ◽  
Vol 148 (2) ◽  
pp. 178-190 ◽  
Author(s):  
Sara E. Campbell ◽  
Frank P. Cuozzo ◽  
Michelle L. Sauther ◽  
Matt Sponheimer ◽  
Virginia L. Ferguson
Author(s):  
M.T. Jahn ◽  
J.C. Yang ◽  
C.M. Wan

4340 Ni-Cr-Mo alloy steel is widely used due to its good combination of strength and toughness. The mechanical property of 4340 steel can be improved by various thermal treatments. The influence of thermomechanical treatment (TMT) has been studied in a low carbon Ni-Cr-Mo steel having chemical composition closed to 4340 steel. TMT of 4340 steel is rarely examined up to now. In this study we obtain good improvement on the mechanical property of 4340 steel by TMT. The mechanism is explained in terms of TEM microstructures4340 (0.39C-1.81Ni-0.93Cr-0.26Mo) steel was austenitized at 950°C for 30 minutes. The TMTed specimen (T) was obtained by forging the specimen continuously as the temperature of the specimen was decreasing from 950°C to 600°C followed by oil quenching to room temperature. The thickness reduction ratio by forging is 40%. The conventional specimen (C) was obtained by quenching the specimen directly into room temperature oil after austenitized at 950°C for 30 minutes. All quenched specimens (T and C) were then tempered at 450, 500, 550, 600 or 650°C for four hours respectively.


2020 ◽  
Vol 4 (4) ◽  
pp. 365-381
Author(s):  
Ny Anjara Fifi Ravelomanantsoa ◽  
Sarah Guth ◽  
Angelo Andrianiaina ◽  
Santino Andry ◽  
Anecia Gentles ◽  
...  

Seven zoonoses — human infections of animal origin — have emerged from the Coronaviridae family in the past century, including three viruses responsible for significant human mortality (SARS-CoV, MERS-CoV, and SARS-CoV-2) in the past twenty years alone. These three viruses, in addition to two older CoV zoonoses (HCoV-229E and HCoV-NL63) are believed to be originally derived from wild bat reservoir species. We review the molecular biology of the bat-derived Alpha- and Betacoronavirus genera, highlighting features that contribute to their potential for cross-species emergence, including the use of well-conserved mammalian host cell machinery for cell entry and a unique capacity for adaptation to novel host environments after host switching. The adaptive capacity of coronaviruses largely results from their large genomes, which reduce the risk of deleterious mutational errors and facilitate range-expanding recombination events by offering heightened redundancy in essential genetic material. Large CoV genomes are made possible by the unique proofreading capacity encoded for their RNA-dependent polymerase. We find that bat-borne SARS-related coronaviruses in the subgenus Sarbecovirus, the source clade for SARS-CoV and SARS-CoV-2, present a particularly poignant pandemic threat, due to the extraordinary viral genetic diversity represented among several sympatric species of their horseshoe bat hosts. To date, Sarbecovirus surveillance has been almost entirely restricted to China. More vigorous field research efforts tracking the circulation of Sarbecoviruses specifically and Betacoronaviruses more generally is needed across a broader global range if we are to avoid future repeats of the COVID-19 pandemic.


2020 ◽  
Vol 62 (12) ◽  
pp. 1181-1186
Author(s):  
Huanchun Wu ◽  
Wenxin Ti ◽  
Guodong Zhang ◽  
Fei Xue ◽  
Chengtao Li ◽  
...  

2013 ◽  
Vol 49 (12) ◽  
pp. 1558 ◽  
Author(s):  
Yongqiang REN ◽  
Zhenjia XIE ◽  
Hongwei ZHANG ◽  
Shengfu YUAN ◽  
Tingting SONG ◽  
...  
Keyword(s):  

2020 ◽  
Vol 13 ◽  
Author(s):  
V. Arumugaprabu ◽  
K.Arun Prasath ◽  
S. Mangaleswaran ◽  
M. Manikanda Raja ◽  
R. Jegan

: The objective of this research is to evaluate the tensile, impact and flexural properties of flax fiber and basalt powder filled polyester composite. Flax fiber is one of the predominant reinforcement natural fiber which possess good mechanical properties and addition of basalt powder as a filler provides additional support to the composite. The Composites are prepared using flax fiber arranged in 10 layers with varying weight percentage of the basalt powder as 5 wt.%, 10 wt.%, 15 wt.%, 20 wt.%, 25 wt.% and 30 wt.% respectively. From the results it is inferred that the composite combination 10 Layers of flax / 5 wt.%, basalt Powder absorbs more tensile load of 145 MPa. Also, for the same combination maximum flexural strength is about 60 MPa. Interestingly in the case of impact strength more energy was absorbed by 10 layers of flax and 30 wt.% of basalt powder. In addition, the failure mechanism of the composites also discussed briefly using SEM studies.


2019 ◽  
Vol 15 ◽  
pp. 102722
Author(s):  
Hui Shao ◽  
Di Shan ◽  
Kaixuan Wang ◽  
Guojun Zhang ◽  
Yongqing Zhao

Sign in / Sign up

Export Citation Format

Share Document