Amplification of elastic waves by a three dimensional valley. Part 1: Steady state response

1990 ◽  
Vol 19 (5) ◽  
pp. 667-680 ◽  
Author(s):  
Tomi K. Mossessian ◽  
Marijan Dravinski
2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Atta Oveisi ◽  
Mohammad Gudarzi ◽  
Seyyed Mohammad Hasheminejad

One of the interesting fields that attracted many researchers in recent years is the smart structures. The piezomaterials, because of their ability in converting both mechanical stress and electricity to each other, are very applicable in this field. However, most of the works available used various inexact two-dimensional theories with certain types of simplification, which are inaccurate in some applications such as thick shells while, in some applications due to request of large displacement/stress, thick piezoelectric panel is needed and two-dimensional theories have not enough accuracy. This study investigates the dynamic steady state response and natural frequency of a piezoelectric circular cylindrical panel using exact three-dimensional solutions based on this decomposition technique. In addition, the formulation is written for both simply supported and clamped boundary conditions. Then the natural frequencies, mode shapes, and dynamic steady state response of the piezoelectric circular cylindrical panel in frequency domain are validated with commercial finite element software (ABAQUS) to show the validity of the mathematical formulation and the results will be compared, finally.


2019 ◽  
Vol 141 (10) ◽  
Author(s):  
Zhaoli Zheng ◽  
Yonghui Xie ◽  
Di Zhang

A generalized and efficient technique of reduced-order model (ROM) is proposed in this paper for stability and steady-state response analysis of an asymmetric rotor based on three-dimensional (3D) finite element model. The equations of motion of the asymmetric rotor-bearing system are established in the rotating frame. Therefore, the periodic time-variant coefficients only exist at a tiny minority of degrees-of-freedom (DOFs) of bearings. During the model reduction process, the asymmetric rotor-bearing system is divided into rotor and bearings. Only the rotor was reduced. And the physical coordinates of bearings are kept in the reduced model during reduction. Then, the relationship between the rotor and bearings is established by inserting periodic time-variant stiffness and damping matrix of bearings into the reduced model of rotor. There is no reduction to the matrices of bearings, which guarantees the accuracy of the calculation. This technique combined with fixed-interface component mode synthesis (CMS) and free-interface CMS is compared with other existing modal reduction method on an off-center asymmetric rotor and shows good performance.


2002 ◽  
Vol 13 (05) ◽  
pp. 260-269 ◽  
Author(s):  
Barbara Cone-Wesson ◽  
John Parker ◽  
Nina Swiderski ◽  
Field Rickards

Two studies were aimed at developing the auditory steady-state response (ASSR) for universal newborn hearing screening. First, neonates who had passed auditory brainstem response, transient evoked otoacoustic emission, and distortion-product otoacoustic emission tests were also tested with ASSRs using modulated tones that varied in frequency and level. Pass rates were highest (> 90%) for amplitude-modulated tones presented at levels ≥ 69 dB SPL. The effect of modulation frequency on ASSR for 500- and 2000-Hz tones was evaluated in full-term and premature infants in the second study. Full-term infants had higher pass rates for 2000-Hz tones amplitude modulated at 74 to 106 Hz compared with pass rates for a 500-Hz tone modulated at 58 to 90 Hz. Premature infants had lower pass rates than full-term infants for both carrier frequencies. Systematic investigation of ASSR threshold and the effect of modulation frequency in neonates is needed to adapt the technique for screening.


Sign in / Sign up

Export Citation Format

Share Document