Laser Ablation Depth Profiling of Helium in Accessory Minerals: Imaging Alpha Ejection Zones and Natural Helium Diffusional Loss Profiles

2021 ◽  
Author(s):  
Matthijs van Soest ◽  
Michelle Aigner ◽  
Kip Hodges ◽  
Alexandra Pye
2013 ◽  
Vol 40 (7) ◽  
pp. 2991-3000 ◽  
Author(s):  
Alexa Benson ◽  
Les Kinsley ◽  
Malte Willmes ◽  
Alban Defleur ◽  
Harri Kokkonen ◽  
...  

2007 ◽  
Vol 359-360 ◽  
pp. 166-170
Author(s):  
Gen Yu Chen ◽  
Li Fang Mei ◽  
Bi Zhang ◽  
Ding Jun Zhu ◽  
Guo Gui Chen

A two-dimensional mathematical model is developed to simulate laser truing and dressing of bronze-bonded diamond grinding wheel. Based on the model, the ablation depth produced on bond and diamond abrasives by an acousto-optic Q-switched YAG pulsed laser under different parameters as well as the temperature field on grinding wheel surface produced in the laser ablation process are numerically simulated. An experimental study on laser truing and dressing of grinding wheel is also conducted. In the study, the wheel surface is ablated by the single-pulsed laser and measured with a measurement device for surface topographic information. Both the theoretical analysis and the experimental results indicate that the truing and dressing processes can be simultaneously realized with the laser ablation as a single process.


2002 ◽  
Vol 66 (6) ◽  
Author(s):  
S. Laville ◽  
F. Vidal ◽  
T. W. Johnston ◽  
O. Barthélemy ◽  
M. Chaker ◽  
...  

2013 ◽  
Vol 1 (1) ◽  
Author(s):  
Deepak Marla ◽  
Upendra V. Bhandarkar ◽  
Suhas S. Joshi

This paper presents a comprehensive transient model of various phenomena that occur during laser ablation of TiC target at subnanosecond time-steps. The model is a 1D numerical simulation using finite volume method (FVM) on a target that is divided into subnanometric layers. The phenomena considered in the model include: plasma initiation, uniform plasma expansion, plasma shielding of incoming radiation, and temperature dependent material properties. It is observed that, during the target heating, phase transformations of any layer occur within a few picoseconds, which is significantly lower than the time taken for it to reach boiling point (~ns). The instantaneous width of the phase transformation zones is observed to be negligibly small (<5nm). In addition, the width of the melt zone remains constant once ablation begins. The melt width decreases with an increase in fluence and increases with an increase in pulse duration. On the contrary, the trend in the ablation depth is exactly opposite. The plasma absorbs about 25–50% of the incoming laser radiation at high fluences (20-40 J/cm2), and less than 5% in the range of 5-10 J/cm2. The simulated results of ablation depth on TiC are in good agreement at lower fluences. At moderate laser fluences (10-25 J/cm2), the discrepancy of the error increases to nearly ±7%. Under prediction of ablation depth by 15% at high fluences of 40 J/cm2 suggests the possibility of involvement of other mechanisms of removal such as melt expulsion and phase explosion at very high fluences.


2012 ◽  
Vol 84 (9) ◽  
pp. 3945-3951 ◽  
Author(s):  
Slobodan Milasinovic ◽  
Yaoming Liu ◽  
Chhavi Bhardwaj ◽  
Melvin Blaze M. T. ◽  
Robert J. Gordon ◽  
...  

2020 ◽  
Author(s):  
Rustam Lukmanov ◽  
Marek Tulej ◽  
Valentine Riedo ◽  
Niels Ligterink ◽  
Coenraad De Koning ◽  
...  

&lt;p&gt;In-situ Mars exploration requires new promising instrumentation that will be capable of delivering highly accurate chemical information about soils and rocks present at the Martian surface. Specific attention is drawn to the instruments that are capable of identifying extinct or extant microbes within the bulk of various solid samples (Tulej et al., 2015; Westall et al., 2015; Wiesendanger et al., 2018). A miniature Laser Ablation/Ionization Mass Spectrometer (LIMS) developed at the University of Bern is among the valid candidates (Wurz et al., 2012). The size of the mass analyzer is only &amp;#216; 60 mm &amp;#215; 160 mm and thus capable of being deployed on a rover or lander platform. In this contribution, we will present data collected from a 1.88 Ga Gunflint sample using a deep UV fs laser system as ablation ion source. The gunflint chert sample contains a population of microfossils entombed in the silica matrix and was chosen as a Martian analogue. Using the high stability of the UV laser and consequent uniform ablation, we performed large-scale spectra collection (90&amp;#8217;000) in two modes - chemical imaging and depth profiling. With the current setup, we achieved a diameter of the analytical spot of ~10 &amp;#181;m for the depth profiling and ~5 &amp;#181;m for the imaging. Our results reveal that our LIMS instrument can identify the location of the microfossil lamination area as well as single microfossils by chemical means. We show how single mass unit spectral decomposition and subsequent kernel clustering reveal masses and intensity regions unique to the microfossils and inorganic host, thus providing the opportunity for automated identification of the spectra that are collected from the microfossils. We also show how transforming spectral intensities into spectral proximities can help to navigate the rich multidimensional datasets. We also address common interpretation problems in LIMS, when multiple mineralogical inclusions contribute to the output spectra acquired within the single analytical spot using &amp;#961;-networks and Principal Component Analysis (PCA). In combination with analysis of spectral proximities, this approach is particularly useful in attempts to assess the biogenicity of the putative terrestrial microfossils as well as potential Martian microfossils. Additionally, we discuss the data analysis pipeline and chemical composition of the microfossils and surrounding inorganic host in detail.&amp;#160;&lt;/p&gt; &lt;p&gt;Tulej M., Neubeck A., Ivarsson M., Riedo A., Neuland M. B., Meyer S., and Wurz P. (2015) Chemical Composition of Micrometer-Sized Filaments in an Aragonite Host by a Miniature Laser Ablation/Ionization Mass Spectrometer. Astrobiology, 15: 669-682.&lt;/p&gt; &lt;p&gt;Westall F., Foucher F., Bost N., Bertrand M., Loizeau D., Vago J. L., Kminek G., Gaboyer F., Campbell K. A., Br&amp;#233;h&amp;#233;ret J.-G. and others. (2015) Biosignatures on Mars: What, Where, and How? Implications for the Search for Martian Life. Astrobiology, 15: 998-1029.&lt;/p&gt; &lt;p&gt;Wiesendanger R., Wacey D., Tulej M., Neubeck A., Ivarsson M., Grimaudo V., Moreno-Garc&amp;#237;a P., Cede&amp;#241;o-L&amp;#243;pez A., Riedo A., Wurz P. and others. (2018) Chemical and Optical Identification of Micrometer-Sized 1.9 Billion-Year-Old Fossils by Combining a Miniature Laser Ablation Ionization Mass Spectrometry System with an Optical Microscope. Astrobiology, 18: 1071-1080.&lt;/p&gt; &lt;p&gt;Wurz P., Abplanalp D., Tulej M., Iakovleva M., Fernandes V. A., Chumikov A., and Managadze G. G. (2012) Mass spectrometric analysis in planetary science: Investigation of the surface and the atmosphere. Solar System Research, 46: 408-422.&lt;/p&gt; &lt;p&gt;&amp;#160;&lt;/p&gt;


2007 ◽  
Vol 539-543 ◽  
pp. 1951-1954 ◽  
Author(s):  
Tomokazu Sano ◽  
Kengo Takahashi ◽  
Akio Hirose ◽  
Kojiro F. Kobayashi

Dependence of the femtosecond laser ablation depth on the laser pulse energy was investigated for Zr55Al10Ni5Cu30 bulk metallic glass. Investigation of the femtosecond laser ablation of bulk metallic glasses has not been reported. Femtosecond laser pulses (wavelength of 800 nm, pulse width of 100 fs, pulse energies of 2 – 900 μJ) were focused and irradiated on the polished surface of metals in air. The ablation depth of the metallic glass is deeper than that of its crystallized metal at a pulse energy in the strong ablation region. We suggest that the energy loss at grain boundaries of hot electrons which is accelerated by the laser electric field influence the ablation depth in the strong ablation region.


2017 ◽  
Vol 74 (4) ◽  
pp. 572-581 ◽  
Author(s):  
Manna L. Warburton ◽  
Malcolm R. Reid ◽  
Claudine H. Stirling ◽  
Gerry Closs

Otolith microchemistry is a widely used technique for elucidating life history patterns in fishes. This typically involves sectioning the otolith and collecting elemental signatures via laser ablation. But this requires time-intensive handling that may influence results. As an alternative to traditional cut–polish–ablate techniques, we tested depth-profiling laser ablation, which offers reduced handling and contamination risk. To validate depth profiling as a robust method for collecting trace element otolith microchemistry data, we constructed composite otoliths using otolith materials from fishes of different origins (fresh water, seawater). Test ablations were conducted on composite diadromous otoliths at a range of spot sizes and pit depths. We measured tailing and fractionation effects in the following elements: Na, Mg, K, Mn, Zn, Rb, Sr, and Ba. Given appropriate instrument parameters, depth profiling can accurately collect elemental concentration data both between and within top and bottom layers of an otolith composite across a range of spot sizes and pit depths. Analytical power and lag effects were dependent on spot size, highlighting the importance of optimizing spot size based on sample morphology and instrument parameters.


2013 ◽  
Vol 27 (3) ◽  
pp. 121-130
Author(s):  
Orang Seyeddain ◽  
Günther Grabner ◽  
Wolfgang Hitzl ◽  
Josef Ruckhofer ◽  
Alois Dexl ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document