Epoxy Resin Beads as a Pharmaceutical Dosage Form II: Dissolution Studies of Epoxy-Amine Beads and Release of Drug

1969 ◽  
Vol 58 (11) ◽  
pp. 1385-1388 ◽  
Author(s):  
S.C. Khanna ◽  
M. Soliva ◽  
P. Speiser
Pharmacia ◽  
2020 ◽  
Vol 67 (2) ◽  
pp. 55-61
Author(s):  
Liliya Logoyda

Aim. A rapid and reproducible HPLC method has been developed for the determination of amlodipine in experimental combined dosage forms containing amlodipine, bisoprolol and enalapril and for drug dissolution studies. Materials and methods. The separation was done using a column Phenomenex Polar Synergi, 5 μm, 4.6×50 mm and a mobile phase of methanol:phosphate buffer solution (65:35, v/v), flow-rate of 1.0 mL/min. The injection volume was 100 μL and the ultraviolet detector was set at 240 nm. Results. The method was validated as per ICH guidelines. Under these conditions, amlodipine was eluted at 1.89 min. Total run time was shorter than 2.5 min. The linearity of the method had a good correlation with concentration and peak area. The correlation coefficient of amlodipine was found to be not less than 0.9991, which indicates good linear relationship over concentration range 0.625 mg/mL–5.000 mg/mL (1.250 mg/mL–5.000 mg/mL at pH 4.5). The % RSD values in intra-day and inter-day precision study were found to be less than 0.267 for amlodipine, which indicate method was precise. Hence, the present developed method was said to be suitable for the analysis of drugs in their pharmaceutical dosage form. Also, in vitro dissolution of amlodipine containing tablets were performed to validate the suitability of the proposed method. The dissolution pattern complies with the FDA standards, indicating suitability of the proposed method for the dissolution study of amlodipine. It will allow conducting comparative studies in vitro to confirm the equivalence of tablets containing amlodipine. Conclusion. A simple and sensetive HPLC method was developed for the estimation of amlodipine in tablets containing amlodipine, enalapril and bisoprolol. The proposed method was applied successfully for quality control assay of amlodipine in experimental tablets and in vitro dissolution studies. In vitro / in vivo correlation of amlodipine has been conducted.


2018 ◽  
Vol 4 (4) ◽  
pp. 523-531
Author(s):  
Hina Mumtaz ◽  
Muhammad Asim Farooq ◽  
Zainab Batool ◽  
Anam Ahsan ◽  
Ashikujaman Syed

The main purpose of development pharmaceutical dosage form is to find out the in vivo and in vitro behavior of dosage form. This challenge is overcome by implementation of in-vivo and in-vitro correlation. Application of this technique is economical and time saving in dosage form development. It shortens the period of development dosage form as well as improves product quality. IVIVC reduce the experimental study on human because IVIVC involves the in vivo relevant media utilization in vitro specifications. The key goal of IVIVC is to serve as alternate for in vivo bioavailability studies and serve as justification for bio waivers. IVIVC follows the specifications and relevant quality control parameters that lead to improvement in pharmaceutical dosage form development in short period of time. Recently in-vivo in-vitro correlation (IVIVC) has found application to predict the pharmacokinetic behaviour of pharmaceutical preparations. It has emerged as a reliable tool to find the mode of absorption of several dosage forms. It is used to correlate the in-vitro dissolution with in vivo pharmacokinetic profile. IVIVC made use to predict the bioavailability of the drug of particular dosage form. IVIVC is satisfactory for the therapeutic release profile specifications of the formulation. IVIVC model has capability to predict plasma drug concentration from in vitro dissolution media.


Author(s):  
Gopi Patel ◽  
Kiral M Prajapati ◽  
Bhavesh Prajapati ◽  
Samir K Shah

A simple, accurate and precise stability-indicating RP-HPLC method was developed and subsequently validated for simultaneous determination of ilaprazole and domperidone in bulk and pharmaceutical dosage form. The proposed HPLC method utilizes  C18  (250 mm × 4.6 mm × 5 µm) column with mobile phase comprising of 0.5 % glacial acetic acid in water pH 5.5 adjusted with ammonia solution: methanol in the ratio 45:55 v/v at a flow rate of 1.0 ml/min. Quantitation was achieved with UV detection at 286 nm based on peak area with linear calibration curves at concentration  ranges 80-120µg/ml for ilaprazole and 240-360 µg/ml for domperidone  with correlation coefficient of 0.999.The retention times of ilaprazole and domperidone  were found to be 3.0 min, 5.4 min respectively. The mean recoveries obtained for ilaprazole and domperidone were found to be 99.76 ± 0.6463 % and 100.7 ± 0.2424 % respectively. Stress testing which covered acid, alkali hydrolysis, and peroxide, photolytic, thermal degradation was performed to prove the specificity of the proposed method and degradation was achieved. The proposed method was successfully applied for the stability indicating simultaneous estimation of ilaprazole and domperidone in routine quality control analysis in bulk and pharmaceutical formulation.


2016 ◽  
Vol 12 (3) ◽  
pp. 177-184 ◽  
Author(s):  
Gamal Abdel-Hafiz Mostafa ◽  
Mohammed Hefnawy ◽  
Mohammed Abounassif ◽  
Amer Alanazi ◽  
Abdulrahman Al-Majed ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document