Acta Chromatographica
Latest Publications


TOTAL DOCUMENTS

749
(FIVE YEARS 199)

H-INDEX

16
(FIVE YEARS 4)

Published By Akademiai Kiado Zrt.

2083-5736, 1233-2356

Abstract A systematic DoE and Analytical Quality by Design (AQbD) approach was utilized for the development and validation of a novel stability indicating high-performance thin–layer chromatographic (HPTLC) method for Rivaroxaban (RBN) estimation in bulk and marketed formulation. A D-optimal design was used to screen the effect of solvents, volume of solvents, time from spotting to development and time for development to scanning. ANOVA results and Pareto chart revealed that toluene, methanol, water and saturation time had an impact on retention time. The critical method and material attributes were further screened by Box-Behnken design (BBD) to achieve optimal chromatographic condition. A stress degradation study was carried out and structure of major alkaline degradant was elaborated. According to the design space, a control strategy was used with toluene: methanol: water (6:2:2) and the saturation time was 15 min. A retention factor (RF) of 0.59 ± 0.05 was achieved for RBN using chromatographic plate precoated with silica gel at detection wavelength 282 nm with optimized conditions. The linear calibration curve was achieved in the concentration range of 200–1,200 ng/band with r 2 > 0.998 suggesting good coordination between analyte concentration and peak areas. The quadratic model was demonstrated as the best fit model and no interaction was noted between CMAs. The optimized HPTLC method was validated critically as stated in International Conference on Harmonization (ICH) Q2 (R1) guideline and implemented successfully for stress degradation study of RBN. The developed HPTLC method obtained through AQbD application was potentially able to resolve all degradants of RBN achieved through forced degradation study. The obtained results demonstrate that a scientific AQbD approach implementation in HPTLC method development and stress degradation study drastically minimizes the number of trials in experiments, ultimately time and cost of analysis could be minimized.


Abstract Bicalutamide (BCL) has been approved for treatment of advanced prostate cancer (Pca), and vitamin D is inevitably used in combination with BCL in Pca patients for skeletal or anti-tumor strategies. Therefore, it is necessary to study the effect of vitamin D application on the pharmacokinetics of BCL. We developed and validated a specific, sensitive and rapid UHPLC–MS/MS method to investigate the pharmacokinetic behaviours of BCL in rat plasma with and without the combined use of vitamin D. Plasma samples were extracted by protein precipitation with ether/dichloromethane (2:1 v/v), and the analytes were separated by a Kinetex Biphenyl 100A column (2.1 × 100 mm, 2.6 μm) with a mobile phase composed of 0.5 mM ammonium acetate (PH 6.5) in water (A) and acetonitrile (B) in a ratio of A:B = 35:65 (v/v). Analysis of the ions was run in the multiple reactions monitoring (MRM) mode. The linear range of BCL was 5–2000 ng mL−1. The intra- and inter-day precision were less than 14%, and the accuracy was in the range of 94.4–107.1%. The mean extraction recoveries, matrix effects and stabilities were acceptable for this method. The validated method was successfully applied to evaluate the pharmacokinetic behaviours of BCL in rat plasma. The results demonstrated that the pharmacokinetic property of BCL is significantly affected by combined use of vitamin D, which might help provide useful evidence for the clinical therapy and further pharmacokinetic study.


Abstract A sensitive and accurate LC-MS/MS method was developed and validated for the simultaneous quantification of rivaroxaban (RIV) and sitagliptin (SIT) in rat plasma using apixaban as internal standard (IS). An Agilent Eclipse plus C18 column (2.1 × 100 mm, 3.5 µm, Agilent) was used for chromatographic separation with isocratic elution. Multiple reaction monitoring (MRM) using positive-ion ESI mode to monitor ion transitions of m/z 436.8→144.9 for RIV, m/z 407.7→173.8 for SIT, m/z 459.8→442.8 for IS. The procedure of method validation included selectivity, linearity, precision, accuracy, matrix effect, extraction recovery and stability were conducted according to the guidelines of EMA and FDA. The results indicated that no obvious drug-drug interactions occurred might be owing to their differences in metabolic pathways.


Abstract Several studies on the pharmacokinetic parameters of antidementia drugs have reported that plasma concentration is linked to the drugs’ efficacy and adverse effects. At present, there is no quantitation method that is highly sensitive and can be applied to simultaneous monitoring of the pharmacokinetics of rivastigmine and its metabolites (NAP 226-90) in rat plasma. No methods fulfilling the assay validation requirements of the US Food and Drug Administration and the European Medicines Agency was also established. Therefore, this study developed a quantitative method for measuring rivastigmine and NAP 226-90 concentrations using high-performance liquid chromatography and tandem mass spectrometry, examining plasma samples after rivastigmine administration. Rat plasma samples were prepared via the protein precipitation method. The methods for measuring rivastigmine and NAP 226-90 concentrations showed good fit over wide ranges of 1–100 ng mL−1 and 0.5–50 ng mL−1, with lower limits of quantification at 1 ng mL−1 and 0.5 ng mL−1, respectively. The plasma concentrations of rivastigmine and NAP 226-90 in six healthy rats were successfully determined, demonstrating the feasibility of applying the developed method. Thus, this research has successfully developed a sensitive, selective method, to simultaneously quantify rivastigmine and NAP 226-90 concentrations in rat plasma and be applicable to a pharmacokinetic study.


Abstract A rapid, simple and efficient ultra-performance liquid chromatography-electrospray ionization-tandem mass spectrometry (UPLC-ESI-MS/MS) method was established to simultaneous determination of shikonin, isobutyryl shikonin, β, βʹ-dimethylacryl alkanin in beagle plasma and evaluated by using esculetin as internal standard. The electrospray ionization (ESI) source was operated in negative ionization mode. Multi-reaction monitoring (MRM) was used to quantitatively analyzed shikonin m/z 287.0 → 217.9, isobutyryl shikonin m/z 357.0 → 268.9, β, βʹ-dimethylacryl alkanin m/z 370.0 → 270.1 and esculetin m/z 177.0 → 89.0, respectively. The method was validated for selectivity, linearity, lower limit of quantification, precision, accuracy, recovery, matrix effect and stability. All validation parameters met the acceptance criteria according to regulatory guidelines. This method was successfully applied for the pharmacokinetic study of shikonin, isobutyryl shikonin, β, βʹ-dimethylacryl alkanin in beagle dogs plasma after oral administration of A. euchroma extract.


Abstract This study establishes a method for rapid detection of clonidine and cyproheptadine in foods of animal origin. In order to obtain the best detection method, capillary zone electrophoresis (CZE), large volume sample stacking (LVSS), and sweeping-micellar electrokinetic capillary chromatography (sweeping-MEKC) were used respectively. The limits of detection (LODs) of clonidine and cyproheptadine by LVSS-CZE were 0.028 μg mL−1 and 0.034 μg mL−1, and those by sweeping-MEKC were 0.023 μg mL−1 and 0.031 μg mL−1, respectively. Compared with the CZE method, the two online pre-concentration technologies have greatly improved the detection sensitivity and achieved good enrichment results. However, compared with the sweeping-MEKC system, the LVSS system consumed a longer time and was greatly affected by the actual sample matrix. The sweeping-MEKC method was proved to be suitable for real sample analysis. Under the best sweeping-MEKC conditions, clonidine and cyproheptadine could be well separated within 8 min and good linear relationships in the range of 0.1–1.0 μg mL−1 (r 2 > 0.99) were obtained. This method was successfully applied to the determination of clonidine and cyproheptadine in animal-derived foods with the recoveries of 82.3%–90.1% and the relative standard deviations (RSDs) less than 3.11%. The sweeping-MEKC method is simple to operate and has great potential in the rapid detection of clonidine and cyproheptadine in animal-derived foods.


Author(s):  
Shishir Tandon ◽  
Suman Lata Pal

Abstract A sensitive and reliable method for simultaneous determination of oryzalin and ethofumesate residues in pantnagar soil and water was validated. The compounds were extracted by LLE with dichloromethane from water, and acetone:methanol mixture from soil followed by SPE cleanup. Detection and quantification was done by RP-HPLC using mobile phase methanol:water (70:30, v/v) at 280 nm. The developed method showed satisfactory validation results with linearity (0.99), relative standard deviations (1.55 and 1.73%), and limit of quantification (0.002 μg g−1 and 0.005 μg g−1) for ethofumesate and oryzalin, respectively. Recoveries ranged for oryzalin and ethofumesate from 79.80–90.52, 75.58–86.04% (soil) and 83.50–95.92, 82.28–94.60% (water), respectively. The method could be used for routine high-throughput detection and determination of these compounds.


Author(s):  
Nariman A. El-Ragehy ◽  
Maha A. Hegazy ◽  
Samia A. Tawfik ◽  
Ghada A. Sedik

Abstract Sulfacetamide sodium is a widely prescribed sulfonamide drug due to its topical antibacterial action on eye and skin. Four impurities are stated in the British Pharmacopoeia among which are sulfanilamide and dapsone. This work presents two specific, accurate and precise chromatographic methods for the simultaneous determination of a mixture of sulfacetamide sodium, sulfanilamide and dapsone. The first method is an isocratic RP-HPLC where the separation of components was achieved on C18 column. A green mobile phase was used consisting of methanol:water (60:40, v/v). The flow rate was 1.0 mL/min and effluent was monitored at 273 nm. The second method is a TLC-spectrodensitometric one where good separation was achieved by using silica plates and a mobile phase consisting of chloroform:dichloromethane:acetic acid (6:2.5:1.5, by volume). Determination was done by densitometry in the absorbance mode at 273 nm. Both methods were validated in compliance with ICH guidelines. They were also successfully applied for the determination of sulfacetamide sodium and its impurities in Ocusol® ophthalmic solutions. The obtained results were statistically compared to the results obtained by applying the official methods of analysis of each component where no significant difference was found with respect to accuracy and precision.


Author(s):  
Zheng Yu ◽  
Fan Chen ◽  
Yinan Jin ◽  
Minyue Zhou ◽  
Xianqin Wang ◽  
...  

Abstract In this study, a UPLC-MS/MS method was developed to measure the concentrations of the flavonoids oroxin A, oroxin B, oroxylin A, oroxyloside, chrysin, chrysin 7-O-beta-gentiobioside, and guaijaverin in the blank mouse blood, and the method was then used in the measurement of the pharmacokinetics of the compounds in mice. Oroxin A, oroxin B, oroxylin A, oroxyloside, chrysin, chrysin 7-O-beta-gentiobioside, and guaijaverin were administered intravenously at a dose of 5 mg kg−1, and the mouse blood (20 μL) was withdrawn from the caudal vein 0.08333, 0.25, 0.5, 1, 2, 4, 6, 8, and 10 h after administration. The mobile phase used for chromatographic separation by gradient elution was composed of acetonitrile and water (0.1% formic acid). The analytes were detected by operating in electrospray ionization (ESI) positive-ion mode using multiple reactions monitoring (MRM). The intra-day and inter-day accuracy ranged from 86.2 to 109.3%, the intra-day precision was less than 14%, and the inter-day precision was less than 15%. The matrix effect ranged from 85.3 to 111.3%, and the recovery of the analytes after protein precipitation were all above 78.2%. This method had the advantages of high sensitivity, accuracy, and recovery, and it had excellent selectivity, which enabled it to be applied to measuring the pharmacokinetics of the analytes in mice.


Author(s):  
Bingying Hu ◽  
Yingying Sun ◽  
Min Wang ◽  
Zhisheng He ◽  
Shanshan Chen ◽  
...  

Abstract A reliable LC-MS/MS method for the determination of five bioactive constituents (bilobalide, BLL; ginkgolide A, GLA; ginkgolide B, GLB; ginkgolide C, GLC; rutin) of Ginkgo biloba leaf extracts (GBE) in rat plasma was established, fully validated and applied to an intragastric pharmacokinetic study of a preparation of GBE in rat. Samples were extracted with ethyl acetate. C18 column was selected as analytical column in this method. Mobile phase was water with 0.01% formic acid and acetonitrile. Quantification was performed in negative multiple-reaction monitoring mode. Matrix instability of terpene lactones was noticed and hydrochloric acid was used as a stabilizer. This method showed good precision and accuracy, recovery was reproducible and matrix effect was negligible. Among four terpene lactones, BLL had the highest exposure and the shortest terminal half-life, GLA and GLB had lower exposure and longer terminal half-life, the exposure of GLC was lowest and its terminal half-life was the maximum, and all of them showed rapid absorption. This study provides a reference for determination of terpene lactones and flavonol glycoside prototypes in GBE and offers pharmacokinetic data of flavonol glycoside prototype in GBE.


Sign in / Sign up

Export Citation Format

Share Document