Dual‐band circularly polarized crossed‐dipole antenna with double split‐ring resonators and a defected ground structure

Author(s):  
Jianfang Deng ◽  
Rui Tian
Author(s):  
Aruna R ◽  
Sreegiri S S

In this paper presents the design of a circular microstrip fractal antenna (CMFA) loaded with parasitic edge-coupled (EC) split ring resonators (SRR) and defected ground structure (DGS). The basic resonant structure is a circular patch antenna designed at 3.2 GHz on FR4 substrate with relative permittivity 4.4, and 1.6 mm thickness. One iteration of circular patch and slots is employed to form it fractal and so as to attain multiband performance, the antenna is inset fed by a 50? microstrip line. Further the work is extended to demonstrate the effect of placing split ring resonator to particular position of substrate, improves the impedance matching leading to improved bandwidth. In addition L shaped defected ground structures are used to improve the antenna performance. . A comparison between fractal antenna with and without SRRs and DGS is made and the results verifies that a better gain improvement and return loss. The dimensions of the antenna are 45 mm x 45 mm and it can be used for ultra wide band (UWB) applications.


2016 ◽  
Vol 64 (8) ◽  
pp. 3640-3645 ◽  
Author(s):  
Krishnamoorthy Kandasamy ◽  
Basudev Majumder ◽  
Jayanta Mukherjee ◽  
Kamla Prasan Ray

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Weiping Li ◽  
Zongxi Tang ◽  
Xin Cao

In this paper, a substrate integrated waveguide (SIW) bandpass filter using defected ground structure (DGS) with complementary split ring resonators (CSRRs) is proposed. By using the unique resonant properties of CSRRs and DGSs, two passbands with a transmission zero in the middle have been achieved. The resonant modes of the two passbands are different and the bandwidth of the second passband is much wider than that of the first one. In order to increase out-of-band rejection, a pair of dumbbell DGSs has been added on each side of the CSRRs. The structure is analyzed using equivalent circuit models and simulated based on EM simulation software. For validation, the proposed filter is fabricated and measured. The measurement results are in good agreement with the simulated ones.


Sign in / Sign up

Export Citation Format

Share Document