Observation of instabilities in flow front during micro injection molding process

2010 ◽  
Vol 50 (7) ◽  
pp. 1377-1381 ◽  
Author(s):  
Sun Kyoung Kim ◽  
Sung-Ju Choi ◽  
Kwan-Hee Lee ◽  
Dae-Jin Kim ◽  
Yeong-Eun Yoo
Keyword(s):  
Injection Molding ◽  
Injection Molding Process ◽  
Flow Front ◽  
Molding Process ◽  
Micro Injection Molding

scholarly journals Vacuum Venting Enhances the Replication of Nano/Microfeatures in Micro-Injection Molding Process

2016 ◽  
Vol 4 (2) ◽  
Author(s):  
Seong Ying Choi ◽  
Nan Zhang ◽  
J. P. Toner ◽  
G. Dunne ◽  
Michael D. Gilchrist
Keyword(s):  
Injection Molding ◽  
Quantitative Study ◽  
Vacuum Pressure ◽  
Injection Molding Process ◽  
Anodized Aluminum ◽  
Molding Process ◽  
Micro Injection Molding ◽  
Sample Shape ◽  
Final Sample ◽  
Qualitative And Quantitative Study

Vacuum venting is a method proposed to improve feature replication in microparts that are fabricated using micro-injection molding (MIM). A qualitative and quantitative study has been carried out to investigate the effect of vacuum venting on the nano/microfeature replication in MIM. Anodized aluminum oxide (AAO) containing nanofeatures and a bulk metallic glass (BMG) tool mold containing microfeatures were used as mold inserts. The effect of vacuum pressure at constant vacuum time, and of vacuum time at constant vacuum pressure on the replication of these features is investigated. It is found that vacuum venting qualitatively enhances the nanoscale feature definition as well as increases the area of feature replication. In the quantitative study, higher aspect ratio (AR) features can be replicated more effectively using vacuum venting. Increasing both vacuum pressure and vacuum time are found to improve the depth of replication, with the vacuum pressure having more influence. Feature orientation and final sample shape could affect the absolute depth of replication of a particular feature within the sample.

scholarly journals Experimental Validation of Injection Molding Simulations of 3D Microparts and Microstructured Components Using Virtual Design of Experiments and Multi-Scale Modeling

Micromachines ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 614 ◽  
Author(s):  
Dario Loaldi ◽  
Francesco Regi ◽  
Federico Baruffi ◽  
Matteo Calaon ◽  
Danilo Quagliotti ◽  
...  
Keyword(s):  
Injection Molding ◽  
Process Simulation ◽  
Current Work ◽  
Injection Molding Process ◽  
Process Conditions ◽  
Virtual Design ◽  
Molding Process ◽  
Micro Injection Molding ◽  
Multi Scale ◽  
Filling Time

The increasing demand for micro-injection molding process technology and the corresponding micro-molded products have materialized in the need for models and simulation capabilities for the establishment of a digital twin of the manufacturing process. The opportunities enabled by the correct process simulation include the possibility of forecasting the part quality and finding optimal process conditions for a given product. The present work displays further use of micro-injection molding process simulation for the prediction of feature dimensions and its optimization and microfeature replication behavior due to geometrical boundary effects. The current work focused on the micro-injection molding of three-dimensional microparts and of single components featuring microstructures. First, two virtual a studies were performed to predict the outer diameter of a micro-ring within an accuracy of 10 µm and the flash formation on a micro-component with mass a 0.1 mg. In the second part of the study, the influence of microstructure orientation on the filling time of a microcavity design section was investigated for a component featuring micro grooves with a 15 µm nominal height. Multiscale meshing was employed to model the replication of microfeatures in a range of 17–346 µm in a Fresnel lens product, allowing the prediction of the replication behavior of a microfeature at 91% accuracy. The simulations were performed using 3D modeling and generalized Navier–Stokes equations using a single multi-scale simulation approach. The current work shows the current potential and limitations in the use of micro-injection molding process simulations for the optimization of micro 3D-part and microstructured components.

42.2: Barrier Ribs of Counter Electrode PDP Discharge Cells via Micro Injection Molding Process

2006 ◽  
Vol 37 (1) ◽  
pp. 1484 ◽  
Author(s):  
Tae-Geum Koh ◽  
Yoo-Seong Kim ◽  
Yong-Seog Kim
Keyword(s):  
Injection Molding ◽  
Counter Electrode ◽  
Injection Molding Process ◽  
Molding Process ◽  
Micro Injection Molding ◽  
Discharge Cells

Design and Experimental Validation of a Process Chain for Thin Components Manufacturing by Micro Injection Molding Process

2021 ◽  
Author(s):  
Vincenzo Bellantone ◽  
Fulvio Lavecchia ◽  
Rossella Surace ◽  
Onofrio Spadavecchia ◽  
Francesco Modica ◽  
...  
Keyword(s):  
Injection Molding ◽  
Rapid Development ◽  
Micro Milling ◽  
Surface Finishing ◽  
Injection Molding Process ◽  
Manufacturing Cost ◽  
Process Chain ◽  
Molding Process ◽  
Micro Injection Molding ◽  
Micro Features

Abstract Micro applications, especially in biomedical and optical sectors, require the fabrication of thin polymeric parts which can be commonly realized by micro injection molding process. However, this process is characterized by a relevant constraint regarding the tooling. Indeed, the design and manufacturing of molds could be a very time-consuming step and so, a significant limitation for the rapid development of new products. Moreover, if the design displays challenging micro-features, their realization could involve the use of more than one mold for the fabrication of a single thin part. Therefore, a proper integration of different manufacturing micro technologies may represent an advantageous method to realise such polymeric thin micro features. In this work, a micro-manufacturing process chain including stereolithography, micro milling and micro injection molding is reported. The mold for the micro injection molding process was fabricated by means of stereolithography and micro milling, which allowed to produce low-cost reconfigurable modular mold, composed by an insert support and a removable insert. The assessment of the proposed process chain was carried out by evaluating the dimensions and the surface finishing and texturing of the milled mold cavities and molded components. Finally, a brief economic analysis compares three process chains for fabricating the micro mold showing that proposed one reduces manufacturing cost of almost 61% with the same production time.

An Investigation into the Influencing Factors for Polymer Melt at the Filling Stage in Micro Injection Molding

2013 ◽  
Vol 562-565 ◽  
pp. 1380-1386
Author(s):  
Jian Zhuang ◽  
Da Ming Wu ◽  
Ya Jun Zhang ◽  
Lin Wang ◽  
Xiong Wei Wang ◽  
...  
Keyword(s):  
Injection Molding ◽  
Influencing Factors ◽  
Polymer Melt ◽  
Theoretical Models ◽  
Injection Molding Process ◽  
Melt Flow ◽  
Molding Process ◽  
Micro Injection Molding ◽  
Filling Stage ◽  
Conventional Injection Molding

The flow behaviors for polymer melt at the filling stage in micro injection molding are different from those in conventional injection molding due to the miniaturization of plastic parts. This paper focuses on the study of the effects of three main influencing factors, including the microscale viscosity and wall slip, on melt filling flow in microscale neglected those in conventional injection molding process. The theoretical models and the interrelation of these factors in microscale channels were constructed by means of the model correction method. Then, the micro melt flow behaviors were investigated with comparisons of the available experimental data. The results indicate that the dimensions affect the shear rates and viscous dissipation, which in turn affects the apparent viscosity. Finally, the conclusion is that the melt flow behaviors in microchannels are different from those in macrochannels owing to these significant influencing factors.

Design and Fabrication of a Polymeric Microfilter for Medical Applications

2015 ◽  
Vol 4 (1) ◽  
Author(s):  
Rossella Surace ◽  
Vincenzo Bellantone ◽  
Gianluca Trotta ◽  
Vito Basile ◽  
Francesco Modica ◽  
...  
Keyword(s):  
Injection Molding ◽  
Electrical Discharge Machining ◽  
Mold Temperature ◽  
Machining Process ◽  
Injection Velocity ◽  
Injection Molding Process ◽  
Molding Process ◽  
Micro Injection Molding ◽  
Melt Temperature ◽  
Steel Mold

This paper reports on design, fabrication, and characterization of a microfilter to be used in biomedical applications. The microfilter, with mesh of 80 μm, is fabricated by micro-injection molding process in polymeric material (polyoxymethylene (POM)) using a steel mold manufactured by micro-electrical discharge machining process. The characteristics of the filter are investigated by numerical simulation in order to define a suitable geometry for micro-injection molding. Then, different process configurations of parameters (melt temperature, injection velocity, mold temperature, holding pressure and time, cooling time, pressure limit) are tested in order to obtain the complete part filling via micro-injection molding process preventing any defects. Finally, the component is dimensionally characterized and the process parameters optimized to obtain the maximum filtration capacity.

Sign in / Sign up

Export Citation Format

Share Document