Dislocation dynamics in the plastic deformation of silicon crystals. II. Theoretical analysis of experimental results

1979 ◽  
Vol 51 (1) ◽  
pp. 217-226 ◽  
Author(s):  
M. Suezawa ◽  
K. Sumino ◽  
I. Yonenaga
Keyword(s):  
Plastic Deformation ◽  
Theoretical Analysis ◽  
Dislocation Dynamics ◽  
Experimental Results ◽  
Silicon Crystals

PHOTOINDUCED NONLINEAR OCTUPOLAR POLARIZATION: TRANSIENT AND PERMANENT REGIMES

1996 ◽  
Vol 05 (04) ◽  
pp. 653-670 ◽  
Author(s):  
CÉLINE FIORINI ◽  
JEAN-MICHEL NUNZI ◽  
FABRICE CHARRA ◽  
IFOR D.W. SAMUEL ◽  
JOSEPH ZYSS
Keyword(s):  
Theoretical Analysis ◽  
Second Harmonic ◽  
Experimental Results ◽  
Polar Field ◽  
Rotational Spectrum ◽  
Dual Frequency ◽  
One Dimensional ◽  
Ethyl Violet ◽  
Disperse Red 1 ◽  
Good Agreement

An original poling method using purely optical means and based on a dual-frequency interference process is presented. We show that the coherent superposition of two beams at fundamental and second-harmonic frequencies results in a polar field with an irreducible rotational spectrum containing both a vector and an octupolar component. This enables the method to be applied even to molecules without a permanent dipole such as octupolar molecules. After a theoretical analysis of the process, we describe different experiments aiming at light-induced noncentrosymmetry performed respectively on one-dimensional Disperse Red 1 and octupolar Ethyl Violet molecules. Macroscopic octupolar patterning of the induced order is demonstrated in both transient and permanent regimes. Experimental results show good agreement with theory.

Disorientations in dislocation structures: Formation and spatial correlation

2002 ◽  
Vol 17 (9) ◽  
pp. 2433-2441 ◽  
Author(s):  
Wolfgang Pantleon
Keyword(s):  
Plastic Deformation ◽  
Spatial Correlation ◽  
Distribution Functions ◽  
Scaling Behavior ◽  
Dislocation Dynamics ◽  
Slip Systems ◽  
Experimental Findings ◽  
Good Agreement

During plastic deformation, dislocation boundaries are formed and orientation differences across them arise. Two different causes lead to the formation of two kinds of deformation-induced boundaries: a statistical trapping of dislocations in incidental dislocation boundaries and a difference in the activation of slip systems on both sides of geometrically necessary boundaries. On the basis of these mechanisms, the occurrence of disorientations across both types of dislocation boundaries is modeled by dislocation dynamics. The resulting evolution of the disorientation angles with strain is in good agreement with experimental observations. The theoretically obtained distribution functions for the disorientation angles describe the experimental findings well and explain their scaling behavior. The model also predicts correlations between disorientations in neighboring boundaries, and evidence for their existence is presented.

Implementation of a High-Precision Ultrasonic Rain Gauge

2013 ◽  
Vol 300-301 ◽  
pp. 382-388
Author(s):  
Zhan Wei Xu ◽  
Gui Lin Zheng
Keyword(s):  
Theoretical Analysis ◽  
High Precision ◽  
Rain Gauge ◽  
Experimental Results ◽  
Full Description ◽  
Self Calibration ◽  
Velocity Of Ultrasound

A novel rain gauge based on acoustic self-calibration principle is proposed in the paper. Acoustic self-calibration principle can eliminate the uncertainty of the velocity of ultrasound and achieve accurate measurement of rainfall. The rain gauge not only overcomes the influence on the rainfall measurement under intensive rainfall conditions, but also improves the precision of rain gauge. Plenty of experiments have been done to validate the design. Both theoretical analysis and experimental results show the effectiveness of the rain gauge. A full description of the rain gauge and implementation are presented.

The Mechanical Characteristics and Sealing Performance Evaluation of Bolted Pipe Flange Connections With Metallic Flat Gaskets Subjected to Internal Pressure

2016 ◽  
Author(s):  
Koji Kondo ◽  
Koji Sato ◽  
Satomi Takahashi ◽  
Toshiyuki Sawa
Keyword(s):  
Plastic Deformation ◽  
Mechanical Characteristics ◽  
Experimental Results ◽  
Leak Rate ◽  
Effect Of Temperature ◽  
Load Factor ◽  
Stress Distributions ◽  
Bolt Preload ◽  
Sealing Performance ◽  
Higher Temperature

Bolted pipe flange connections with metallic gaskets have been used under higher pressure as well as higher temperature. However, a few researches on the mechanical characteristics in connections with metallic gaskets have been carried out. It is necessary to examine the mechanical characteristics such as the contact gasket stress distributions which govern the sealing performance, the deformation of the metallic gaskets, changes in axial bolt forces and the hub stress under higher pressure and temperature. In the present paper, the objectives are to examine the changes in axial bolt forces, the hub stress and the contact gasket stress distributions and the sealing performance of the pipe flange connections with metallic flat gaskets. Firstly, the mechanical characteristics of the connections under higher pressure are analyzed using FEA. Then, experiments were carried out to measure the load factor, the hub stress and the leak rate (the sealing performance). The relationship between the average contact gasket stress and the leak rate was measured using platen device at room temperature. The FEA results are fairly coincided with the experimental results. It is shown that the leak rate decreases as the contact gasket stress increases and when the plastic deformation of gaskets occurs, the sealing performance increases. The leak rate was measured in the range of 10−4∼10−7 [Pa·m3/s]. It is found that the sealing performance increases as the gasket width increase in the elastic deformation range while it is independent of the gasket width when the plastic deformation occurs. The effect of temperature on the mechanical characteristics of the connection is also examined. The FEA results are in a fairly good agreement with the experimental results. It is found that the sealing performance increases as the temperature increases. In addition, a method how to determine the bolt preload for increasing the sealing performance is proposed.

scholarly journals New Topologies of Lossless Grounded Inductor Using OTRA

2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
Rajeshwari Pandey ◽  
Neeta Pandey ◽  
Sajal K. Paul ◽  
A. Singh ◽  
B. Sriram ◽  
...  
Keyword(s):  
Theoretical Analysis ◽  
Experimental Results ◽  
Pspice Simulation ◽  
Operational Transresistance Amplifier

Two alternate topologies of lossless grounded inductor have been proposed using operational transresistance amplifier (OTRA). Three applications using the proposed inductors are also included. PSPice simulation and experimental results have been included to demonstrate the performance and verify the theoretical analysis.

Sign in / Sign up

Export Citation Format

Share Document