Sliding mode force, motion control, and stabilization of elastic manipulator in the presence of uncertainties

1995 ◽  
Vol 12 (5) ◽  
pp. 315-330 ◽  
Author(s):  
Woosoon Vim ◽  
Sahjendra N. Singh
Keyword(s):  
Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 747
Author(s):  
Mai The Vu ◽  
Tat-Hien Le ◽  
Ha Le Nhu Ngoc Thanh ◽  
Tuan-Tu Huynh ◽  
Mien Van ◽  
...  

Underwater vehicles (UVs) are subjected to various environmental disturbances due to ocean currents, propulsion systems, and un-modeled disturbances. In practice, it is very challenging to design a control system to maintain UVs stayed at the desired static position permanently under these conditions. Therefore, in this study, a nonlinear dynamics and robust positioning control of the over-actuated autonomous underwater vehicle (AUV) under the effects of ocean current and model uncertainties are presented. First, a motion equation of the over-actuated AUV under the effects of ocean current disturbances is established, and a trajectory generation of the over-actuated AUV heading angle is constructed based on the line of sight (LOS) algorithm. Second, a dynamic positioning (DP) control system based on motion control and an allocation control is proposed. For this, motion control of the over-actuated AUV based on the dynamic sliding mode control (DSMC) theory is adopted to improve the system robustness under the effects of the ocean current and model uncertainties. In addition, the stability of the system is proved based on Lyapunov criteria. Then, using the generalized forces generated from the motion control module, two different methods for optimal allocation control module: the least square (LS) method and quadratic programming (QP) method are developed to distribute a proper thrust to each thruster of the over-actuated AUV. Simulation studies are conducted to examine the effectiveness and robustness of the proposed DP controller. The results show that the proposed DP controller using the QP algorithm provides higher stability with smaller steady-state error and stronger robustness.


2006 ◽  
Vol 54 (7/2006) ◽  
Author(s):  
Konstantin Kondak ◽  
Andreas Wege ◽  
Bartlomiej Stanczyk ◽  
Martin Buss ◽  
Günter Hommel

Author(s):  
Eming Chen

Abstract In the flexible robot force control situations, if there exists a discontinuity between the robot tip sensor and the work-piece, the robot contact process becomes a nonlinear system control problem. The control tasks require the robot hand to switch from free motion control to contact motion control. The inevitable high impact force tends to let the system become unstable. The purpose of this paper is to investigate the control of the manipulator during this process. In this paper, dynamic models of the flexible link manipulator in both non-contacted and contacted modes are first derived. Due to the fact that the arm vibration shape functions are changed between the two modes, a transform matrix will be used to transform the controlled state variables, such as generalized position and velocity. A nonlinear sliding mode control technique has been implemented in an attempt to extinguish the chatter phenomenon and settle quickly to the desired setpoint.


Sign in / Sign up

Export Citation Format

Share Document