OPTIMIZATION OF CO2 INJECTION FOR SEQUESTRATION / ENHANCED OIL RECOVERY AND CURRENT STATUS IN CANADA

2006 ◽  
pp. 261-270 ◽  
Author(s):  
T. Babadagli
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Current Status ◽  
Co2 Injection

scholarly journals Recovery rates, enhanced oil recovery and technological limits

2014 ◽  
Vol 372 (2006) ◽  
pp. 20120320 ◽  
Author(s):  
Ann Muggeridge ◽  
Andrew Cockin ◽  
Kevin Webb ◽  
Harry Frampton ◽  
Ian Collins ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Current Status ◽  
Comprehensive Overview ◽  
Oil Reserves ◽  
The North ◽  
History Of ◽  
The North Sea ◽  
Giant Fields ◽  
Broad Consensus

Enhanced oil recovery (EOR) techniques can significantly extend global oil reserves once oil prices are high enough to make these techniques economic. Given a broad consensus that we have entered a period of supply constraints, operators can at last plan on the assumption that the oil price is likely to remain relatively high. This, coupled with the realization that new giant fields are becoming increasingly difficult to find, is creating the conditions for extensive deployment of EOR. This paper provides a comprehensive overview of the nature, status and prospects for EOR technologies. It explains why the average oil recovery factor worldwide is only between 20% and 40%, describes the factors that contribute to these low recoveries and indicates which of those factors EOR techniques can affect. The paper then summarizes the breadth of EOR processes, the history of their application and their current status. It introduces two new EOR technologies that are beginning to be deployed and which look set to enter mainstream application. Examples of existing EOR projects in the mature oil province of the North Sea are discussed. It concludes by summarizing the future opportunities for the development and deployment of EOR.

Monitoring of fluid–rock interaction and CO2 storage through produced fluid sampling at the Weyburn CO2-injection enhanced oil recovery site, Saskatchewan, Canada

2005 ◽  
Vol 20 (6) ◽  
pp. 1131-1157 ◽  
Author(s):  
S. Emberley ◽  
I. Hutcheon ◽  
M. Shevalier ◽  
K. Durocher ◽  
B. Mayer ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Co2 Storage ◽  
Co2 Injection ◽  
Rock Interaction ◽  
Fluid Sampling

scholarly journals Minimum miscibility pressure computation in eor by flare gas flooding

2018 ◽  
Vol 10 (2) ◽  
pp. 61
Author(s):  
Tjokorde Walmiki Samadhi ◽  
Utjok W.R. Siagian ◽  
Angga P Budiono
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Gas Injection ◽  
Molar Ratio ◽  
Co2 Injection ◽  
Co2 Flooding ◽  
Minimum Miscibility Pressure ◽  
Gas Flooding ◽  
Model Oil ◽  
Gas Drive

The technical feasibility of using flare gas in the miscible gas flooding enhanced oil recovery (MGF-EOR) is evaluated by comparing the minimum miscibility pressure (MMP) obtained using flare gas to the MMP obtained in the conventional CO2 flooding. The MMP is estimated by the multiple mixing cell calculation method with the Peng-Robinson equation of state using a binary nC5H12-nC16H34 mixture at a 43%:57% molar ratio as a model oil. At a temperature of 323.15 K, the MMP in CO2 injection is estimated at 9.78 MPa. The MMP obtained when a flare gas consisting of CH4 and C2H6 at a molar ratio of 91%:9% is used as the injection gas is predicted to be 3.66 times higher than the CO2 injection case. The complete gas-oil miscibility in CO2 injection occurs via the vaporizing gas drive mechanism, while flare gas injection shifts the miscibility development mechanism to the combined vaporizing / condensing gas drive. Impact of variations in the composition of the flare gas on MMP needs to be further explored to confirm the feasibility of flare gas injection in MGF-EOR processes. Keywords: flare gas, MMP, miscible gas flooding, EORAbstrakKonsep penggunaan flare gas untuk proses enhanced oil recovery dengan injeksi gas terlarut (miscible gas flooding enhanced oil recovery atau MGF-EOR) digagaskan untuk mengurangi emisi gas rumah kaca dari fasilitas produksi migas, dengan sekaligus meningkatkan produksi minyak. Kelayakan teknis injeksi flare gas dievaluasi dengan memperbandingkan tekanan pelarutan minimum (minimum miscibility pressure atau MMP) untuk injeksi flare gas dengan MMP pada proses MGF-EOR konvensional menggunakan injeksi CO2. MMP diperkirakan melalui komputasi dengan metode sel pencampur majemuk dengan persamaan keadaan Peng-Robinson, pada campuran biner nC5H12-nC16H34 dengan nisbah molar 43%:57% sebagai model minyak. Pada temperatur 323.15 K, estimasi MMP yang diperoleh dengan injeksi CO2 adalah 9.78 MPa. Nilai MMP yang diperkirakan pada injeksi flare gas yang berupa campuran CH4-C2H6 pada nisbah molar 91%:9% sangat tinggi, yakni sebesar 3.66 kali nilai yang diperoleh pada kasus injeksi CO2. Pelarutan sempurna gas-minyak dalam injeksi CO2 terbentuk melalui mekanisme dorongan gas menguap (vaporizing gas drive), sementara pelarutan pada injeksi flare gas terbentuk melaui mekanisme kombinasi dorongan gas menguap dan mengembun (vaporizing/condensing gas drive). Pengaruh variasi komposisi flare gas terhadap MMP perlu dikaji lebih lanjut untuk menjajaki kelayakan injeksi flare gas dalam proses MGF-EOR.Kata kunci: flare gas, MMP, miscible gas flooding, EOR

scholarly journals GPS-based monitoring of surface deformation associated with CO2 injection at an enhanced oil recovery site

2015 ◽  
Vol 41 ◽  
pp. 116-126 ◽  
Author(s):  
Makan A. Karegar ◽  
Timothy H. Dixon ◽  
Rocco Malservisi ◽  
Qian Yang ◽  
Seyyed A. Hossaini ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Surface Deformation ◽  
Co2 Injection

scholarly journals Simulation of enhanced oil recovery with CO2 injection

2020 ◽  
Author(s):  
Simon Salvesen Holte ◽  
Jan Vidar E. Knutsen ◽  
Roy Sømme Ommedal ◽  
Britt M. E. Moldestad
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Co2 Injection
Sign in / Sign up

Export Citation Format

Share Document