Iterative Three-Dimensional Epidermis Bioengineering and Xenografting to Assess Long-Term Regenerative Potential in Human Keratinocyte Precursor Cells

2019 ◽  
pp. 155-167 ◽  
Author(s):  
Nicolas O. Fortunel ◽  
Emmanuelle Bouissou-Cadio ◽  
Julien Coutier ◽  
Michèle T. Martin
Keyword(s):  
Three Dimensional ◽  
Precursor Cells ◽  
Human Keratinocyte

Practical electron tomography

1995 ◽  
Vol 53 ◽  
pp. 742-743
Author(s):  
C.L. Woodcock
Keyword(s):  
Electron Tomography ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
3D Shape ◽  
Computational Resources ◽  
Shape Of Particles

Despite the potential of the technique, electron tomography has yet to be widely used by biologists. This is in part related to the rather daunting list of equipment and expertise that are required. Thanks to continuing advances in theory and instrumentation, tomography is now more feasible for the non-specialist. One barrier that has essentially disappeared is the expense of computational resources. In view of this progress, it is time to give more attention to practical issues that need to be considered when embarking on a tomographic project. The following recommendations and comments are derived from experience gained during two long-term collaborative projects.Tomographic reconstruction results in a three dimensional description of an individual EM specimen, most commonly a section, and is therefore applicable to problems in which ultrastructural details within the thickness of the specimen are obscured in single micrographs. Information that can be recovered using tomography includes the 3D shape of particles, and the arrangement and dispostion of overlapping fibrous and membranous structures.

Custom Presurgical Planning for Midfacial Reconstruction

2020 ◽  
Vol 36 (06) ◽  
pp. 696-702
Author(s):  
Nolan B. Seim ◽  
Enver Ozer ◽  
Sasha Valentin ◽  
Amit Agrawal ◽  
Mead VanPutten ◽  
...  
Keyword(s):  
Multidisciplinary Approach ◽  
Functional Performance ◽  
Three Dimensional ◽  
Free Tissue Transfer ◽  
Long Term Effects ◽  
Presurgical Planning ◽  
Dental Rehabilitation ◽  
Midface Reconstruction ◽  
Reconstructive Algorithm

AbstractResection and reconstruction of midface involve complex ablative and reconstructive tools in head and oncology and maxillofacial prosthodontics. This region is extraordinarily important for long-term aesthetic and functional performance. From a reconstructive standpoint, this region has always been known to present challenges to a reconstructive surgeon due to the complex three-dimensional anatomy, the variable defects created, combination of the medical and dental functionalities, and the distance from reliable donor vessels for free tissue transfer. Another challenge one faces is the unique features of each individual resection defect as well as individual patient factors making each preoperative planning session and reconstruction unique. Understanding the long-term effects on speech, swallowing, and vision, one should routinely utilize a multidisciplinary approach to resection and reconstruction, including head and neck reconstructive surgeons, prosthodontists, speech language pathologists, oculoplastic surgeons, dentists, and/or craniofacial teams as indicated and with each practice pattern. With this in mind, we present our planning and reconstructive algorithm in midface reconstruction, including a dedicated focus on dental rehabilitation via custom presurgical planning.

Interpenetrating Gels as Conducting/Adhering Matrices Enabling High-Performance Silicon Anodes

2021 ◽  
Author(s):  
Tingting Xia ◽  
Chengfei Xu ◽  
Pengfei Dai ◽  
Xiaoyun Li ◽  
Riming Lin ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Electrode Materials ◽  
Three Dimensional ◽  
Electrochemical Energy Storage ◽  
Active Materials ◽  
Silicon Anodes ◽  
Weak Binding ◽  
Binding Forces

Three-dimensional (3D) conductive polymers are promising conductive matrices for electrode materials toward electrochemical energy storage. However, their fragile nature and weak binding forces with active materials could not guarantee long-term...

scholarly journals Recurrent contracted sockets treated with personalized, three-dimensionally printed conformers and buccal grafts

2021 ◽  
pp. 112067212110000
Author(s):  
Annabel LW Groot ◽  
Jelmer S Remmers ◽  
Roel JHM Kloos ◽  
Peerooz Saeed ◽  
Dyonne T Hartong
Keyword(s):  
Three Dimensional ◽  
Case Series ◽  
Secondary Outcome ◽  
Retrospective Case ◽  
Upper Eyelid ◽  
Ocular Prosthesis ◽  
Buccal Mucosal Graft ◽  
Custom Made ◽  
3D Printed

Purpose: Recurrent contracted sockets are complex situations where previous surgeries have failed, disabling the wear of an ocular prosthesis. A combined method of surgery and long-term fixation using custom-made, three-dimensional (3D) printed conformers is evaluated. Methods: Retrospective case series of nine patients with recurrent excessive socket contraction and inability to wear a prosthesis, caused by chemical burns ( n = 3), fireworks ( n = 3), trauma ( n = 2) and enucleation and radiotherapy at childhood due to optic nerve glioma ( n = 1) with three average previous socket surgeries (range 2–6). Treatment consisted of a buccal mucosal graft and personalized 3D-printed conformer designed to be fixated to the periosteum and tarsal plates for minimal 2 months. Primary outcome was the retention of an ocular prosthesis. Secondary outcome was the need for additional surgeries. Results: Outcomes were measured at final follow-up between 7 and 36 months postoperatively (mean 20 months). Eight cases were able to wear an ocular prosthesis after 2 months. Three cases initially treated for only the upper or only the lower fornix needed subsequent surgery for the opposite fornix for functional reasons. Two cases had later surgery for cosmetic improvement of upper eyelid position. Despite pre-existing lid abnormalities (scar, entropion, lash deficiency), cosmetic outcome was judged highly acceptable in six cases because of symmetric contour and volume, and reasonably acceptable in the remaining two. Conclusions: Buccal mucosal transplant fixated with a personalized 3D-designed conformer enables retention of a well-fitted ocular prosthesis in previously failed socket surgeries. Initial treatment of both upper and lower fornices is recommended to avoid subsequent surgeries for functional reasons.

Three Dimensional Numerical Analyses of Bridge Piled-Raft Foundation under Riverbed Erosion

2012 ◽  
Vol 178-181 ◽  
pp. 2373-2377 ◽  
Author(s):  
Wen Tsung Liu ◽  
Yi Yi Li
Keyword(s):  
Bearing Capacity ◽  
Three Dimensional ◽  
Fem Analysis ◽  
Bridge Piers ◽  
Piled Raft Foundation ◽  
River Erosion ◽  
Dimensional Finite Element ◽  
The Face ◽  
Three Dimensional Finite Element

From the 921 earthquake to the major typhoons, including the Morakot typhoon, they damaged original landscape of rivers in Taiwan. In recent years, it alleged that abutment bridge exposed to the most serious security problems. Because of bridge piers in addition to the face of long-term river erosion, the flood on the pier will produce localized erosion near the bridge. The pier will be due to inadequate bearing capacity, resulting in subsidence, displacement, bridge version accompanied by tilting and even caving. The river erosion of soil around the piers deposits and production of contraction will often reduce the bearing capacity. Therefore, how to accurately estimate the scour depth, calculate piers to withstand water impact and analyses its stability for preventing injuries in the first place is the current pressing issues. In this study, three-dimensional finite element method (FEM) analysis program Plaxis 3D foundation is used. Polaris second bridge is selected for analysis. Based on local scouring of the model and various numerical variable conditions, the parameter of bridge pier is studied.

scholarly journals Preoperative virtual simulation for synchronous multiple primary lung cancers using three-dimensional computed tomography lung reconstruction: a case report

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Weichun Wu ◽  
Yimin Wu ◽  
Gang Shen ◽  
Guofei Zhang
Keyword(s):  
Computed Tomography ◽  
Thoracoscopic Surgery ◽  
Three Dimensional ◽  
Primary Lung Cancer ◽  
Pulmonary Nodules ◽  
Term Survival ◽  
Lung Cancers ◽  
Multiple Primary ◽  
Feasible Alternative

Abstract Background As the positions and sizes of nodules in synchronous multiple primary lung cancer (SMPLC) patients differ, the development of surgical strategies to maximize long-term survival and preserved postoperative pulmonary function in SMPLC patients for whom surgical resection is an alternative strategy presents challenges. Case presentation We provide a case managed through video-assisted thoracoscopic surgery (VATS) resection using three-dimensional computed tomography lung reconstruction (3D-CTLR) to reconstruct lobes containing pulmonary nodules to preoperatively simulate and intraoperatively guide the extent and method of resection. Conclusion The successful attempt demonstrates a technically simplified, feasible alternative to preoperative plans utilizing less invasive VATS to manage SMPLC.

scholarly journals Long-term prognostic significance of three-dimensional echocardiographic parameters of the left ventricle and left atrium

2009 ◽  
Vol 11 (3) ◽  
pp. 250-256 ◽  
Author(s):  
S. Caselli ◽  
E. Canali ◽  
M. L. Foschi ◽  
D. Santini ◽  
E. Di Angelantonio ◽  
...  
Keyword(s):  
Left Ventricle ◽  
Left Atrium ◽  
Prognostic Significance ◽  
Three Dimensional ◽  
Echocardiographic Parameters
Sign in / Sign up

Export Citation Format

Share Document