Accurate Reconstruction of Flaws in Materials Using a Synthetic Aperture Ultrasonic Imaging System

Author(s):  
Junichi Ishii ◽  
Souji Sasaki ◽  
Jun Kubota
Author(s):  
Guangzhi Dai ◽  
Zhiyong He ◽  
Hongwei Sun

Background: This study is carried out targeting the problem of slow response time and performance degradation of imaging system caused by large data of medical ultrasonic imaging. In view of the advantages of CS, it is applied to medical ultrasonic imaging to solve the above problems. Objective: Under the condition of satisfying the speed of ultrasound imaging, the quality of imaging can be further improved to provide the basis for accurate medical diagnosis. Methods: According to CS theory and the characteristics of the array ultrasonic imaging system, block compressed sensing ultrasonic imaging algorithm is proposed based on wavelet sparse representation. Results: Three kinds of observation matrices have been designed on the basis of the proposed algorithm, which can be selected to reduce the number of the linear array channels and the complexity of the ultrasonic imaging system to some extent. Conclusion: The corresponding simulation program is designed, and the result shows that this algorithm can greatly reduce the total data amount required by imaging and the number of data channels required for linear array transducer to receive data. The imaging effect has been greatly improved compared with that of the spatial frequency domain sparse algorithm.


Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2275
Author(s):  
Hae Gyun Lim ◽  
Hyung Ham Kim ◽  
Changhan Yoon

High-frequency ultrasound (HFUS) imaging has emerged as an essential tool for pre-clinical studies and clinical applications such as ophthalmic and dermatologic imaging. HFUS imaging systems based on array transducers capable of dynamic receive focusing have considerably improved the image quality in terms of spatial resolution and signal-to-noise ratio (SNR) compared to those by the single-element transducer-based one. However, the array system still suffers from low spatial resolution and SNR in out-of-focus regions, resulting in a blurred image and a limited penetration depth. In this paper, we present synthetic aperture imaging with a virtual source (SA-VS) for an ophthalmic application using a high-frequency convex array transducer. The performances of the SA-VS were evaluated with phantom and ex vivo experiments in comparison with the conventional dynamic receive focusing method. Pre-beamformed radio-frequency (RF) data from phantoms and excised bovine eye were acquired using a custom-built 64-channel imaging system. In the phantom experiments, the SA-VS method showed improved lateral resolution (>10%) and sidelobe level (>4.4 dB) compared to those by the conventional method. The SNR was also improved, resulting in an increased penetration depth: 16 mm and 23 mm for the conventional and SA-VS methods, respectively. Ex vivo images with the SA-VS showed improved image quality at the entire depth and visualized structures that were obscured by noise in conventional imaging.


2015 ◽  
Vol 38 (4) ◽  
pp. 285-297 ◽  
Author(s):  
Brent K. Hoffmeister ◽  
Morgan R. Smathers ◽  
Catherine J. Miller ◽  
Joseph A. McPherson ◽  
Cameron R. Thurston ◽  
...  

2004 ◽  
Vol 12 (04) ◽  
pp. 571-585
Author(s):  
L. MEDINA ◽  
E. MORENO

An algorithm has been developed to implement synthetic aperture focusing technique for B-scan. This is made at a several transmitter/receiver locations to form a map of ultrasonic reflectivity on the insonified region, considering the path travelled by the ultrasonic pulse from the transducer to the target and back again. To reconstruct the image, a time domain beam-former is applied to the envelope of the detected signals. This method minimizes the side-lobe amplitude and the restriction of λ/2 distance between two adjacent transducer positions can be neglected without loosing image resolution. The present work is focused on the location of the in-homogeneities, caused by the presence of a phantom immersed in a water tank. The results are presented when the distance between two adjacent transducer positions are varied from 0.5λ to 2.5λ showing that the longitudinal resolution is not affected but the lateral resolution becomes poorer when the distance is about 2λ. The error in the longitudinal location of in-homogeneities is within the minimum detectable distance of the system, while the lateral location error is increased when the distance between any two adjacent transducer positions is larger than 1.5λ.


Sign in / Sign up

Export Citation Format

Share Document