Freeze Fracture and Freeze Etching

Author(s):  
Douglas E. Chandler ◽  
William P. Sharp
Author(s):  
Thomas S. Leeson ◽  
C. Roland Leeson

Numerous previous studies of outer segments of retinal receptors have demonstrated a complex internal structure of a series of transversely orientated membranous lamellae, discs, or saccules. In cones, these lamellae probably are invaginations of the covering plasma membrane. In rods, however, they appear to be isolated and separate discs although some authors report interconnections and some continuities with the surface near the base of the outer segment, i.e. toward the inner segment. In some species, variations have been reported, such as longitudinally orientated lamellae and lamellar whorls. In cross section, the discs or saccules show one or more incisures. The saccules probably contain photolabile pigment, with resulting potentials after dipole formation during bleaching of pigment. Continuity between the lamina of rod saccules and extracellular space may be necessary for the detection of dipoles, although such continuity usually is not found by electron microscopy. Particles on the membranes have been found by low angle X-ray diffraction, by low temperature electron microscopy and by freeze-etching techniques.


Author(s):  
Nicholas J Severs

In his pioneering demonstration of the potential of freeze-etching in biological systems, Russell Steere assessed the future promise and limitations of the technique with remarkable foresight. Item 2 in his list of inherent difficulties as they then stood stated “The chemical nature of the objects seen in the replica cannot be determined”. This defined a major goal for practitioners of freeze-fracture which, for more than a decade, seemed unattainable. It was not until the introduction of the label-fracture-etch technique in the early 1970s that the mould was broken, and not until the following decade that the full scope of modern freeze-fracture cytochemistry took shape. The culmination of these developments in the 1990s now equips the researcher with a set of effective techniques for routine application in cell and membrane biology.Freeze-fracture cytochemical techniques are all designed to provide information on the chemical nature of structural components revealed by freeze-fracture, but differ in how this is achieved, in precisely what type of information is obtained, and in which types of specimen can be studied.


Author(s):  
Yeshayahu Talmon

To bring out details in the fractured surface of a frozen sample in the freeze fracture/freeze-etch technique,the sample or part of it is warmed to enhance water sublimation.One way to do this is to raise the temperature of the entire sample to about -100°C to -90°C. In this case sublimation rates can be calculated by using plots such as Fig.1 (Talmon and Thomas),or by simplified formulae such as that given by Menold and Liittge. To achieve higher rates of sublimation without heating the entire sample a radiative heater can be used (Echlin et al.). In the present paper a simplified method for the calculation of the rates of sublimation under a constant heat flux F [W/m2] at the surface of the sample from a heater placed directly above the sample is described.


1978 ◽  
Vol 76 (3) ◽  
pp. 712-728 ◽  
Author(s):  
H Gross ◽  
E Bas ◽  
H Moor

Conventional freeze-etching is carried out in a vacuum of approximately 10(-6) torr and at a specimen temperature of -100 degrees C. The relatively poor topographic resolution of most freeze-etch replicas, and the lack of complementarity of morphological details in double replicas have been thought to be caused by structural distortions during fracturing, and radiation damage during replication. Both phenomena can be reduced by lowering the specimen temperature. To prevent condensation of residual gases (especially H2O) on the fracture faces at lower specimen temperature, an improved vacuum is required. Therefore, an ultrahigh vacuum freeze-fracture apparatus has been developed which allows fracturing and Pt/C-shadowing of specimens at -196 degrees C while maintaining a vacuum of 10(-9) torr. It consists of a modified Balzers BA 350 ultrahigh vacuum (UHV) unit, equipped with an airlock which enables the input of nonhoar-frosted specimens directly into the evacuated bell jar. A comparison of the paracrystalline plasmalemma structure in yeast cells portrayed by the conventional technique and by UHV-freeze-fracturing at -196 degrees C shows the improved topographic resolution which has been achieved with the new technique. The improvement is explained by less structural distortions during fracturing at lower temperatures. The particles of the paracrystalline regions on the P face are more regularly arranged and exhibit a craterlike substructure which corresponds with a ringlike depression in the E face. The optical diffraction patterns of these paracrystalline regions demonstrate the improvement of the structural record by showing well-defined third- and fourth-order spots.


1987 ◽  
Vol 105 (4) ◽  
pp. 1649-1662 ◽  
Author(s):  
L Sperling ◽  
A Tardieu ◽  
T Gulik-Krzywicki

Paramecium trichocysts are unusual secretory organelles in that: (a) their crystalline contents are built up from a family of low molecular mass acidic proteins; (b) they have a precise, genetically determined shape; and (c) the crystalline trichocyst contents expand rapidly upon exocytosis to give a second, extracellular form which is also an ordered array. We report here the first step of our study of trichocyst structure. We have used a combination of x-ray powder diffraction, freeze-etching, and freeze-fracture electron microscopy of isolated, untreated trichocysts, and density measurements to show that trichocyst contents are indeed protein crystals and to determine the elementary unit cell of both the compact intracellular and the extended extracellular form.


1978 ◽  
Vol 79 (1) ◽  
pp. 276-280 ◽  
Author(s):  
UB Sleytr ◽  
P Messner

The fine structure of the regular arrays of subunits seen on both plasmalemma fracture faces in resting and starved Saccharomyces cerevisiae (baker's yeast) has been compared using different freeze-fracture replication methods. Freeze-cleaving was carried out at 173 degrees, 133 degrees, and 108 degrees K under a vacuum of 2 X 10(-7) torr (2.6 X 10(- 7)mbar) or under liquid nitrogen at atmosphereic pressure. Independent of the preparation conditions (fracturing temperature, and whether cleaved under vacuum or liquid nitrogen), resting and starved yeast show a significant difference in the morphology of the subunits forming the regular arrays. The regularly arranged particles of the P face of the plasmalemma of starved yeast have a clear craterlike structure which has previously been reported to be demonstrated only by freeze-etching at very low temperatures in ultrahigh vacuum. A complementary structure is seen on the plasmalemma E face. Prolonged exposures of fracture faces under the protection of liquid nitrogen-cooled shrouds have shown that, because of the consequent drastic reduction of condensable gases in the specimen area, no detectable condensation contamination of exposed fracture faces occurs within 15 min at a specimen temperature of 108 degrees K. This shows that a complicated ultrahigh vacuum technology is not required for high resolution freeze- etching.


Sign in / Sign up

Export Citation Format

Share Document