Fatigue and Crack Behavior of Nanostructured Metal Alloys and Composites

Author(s):  
Pasquale Cavaliere
Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7179
Author(s):  
Francesco Torre ◽  
Claudio Mingazzini ◽  
Daniele Mirabile Gattia ◽  
Teodor Huminiuc ◽  
Antonio Rinaldi ◽  
...  

The stability of nanostructured metal alloys is currently being extensively investigated, and several mathematical models have been developed to describe the thermodynamics of these systems. However, model capability in terms of thermal stability predictions strongly relies on grain boundary-related parameters that are difficult to measure or estimate accurately. To overcome this limitation, a novel theoretical approach is proposed and adopted in this work to identify W-based nanocrystalline alloys which are potentially able to show thermodynamic stability. A comparison between model outcomes and experimental findings is reported for two selected alloys, namely W-Ag and W-Al. Experimental results clearly highlight that W-Ag mixtures retain a segregated structure on relatively coarse length scales even after prolonged mechanical treatments. Moreover, annealing at moderate temperatures readily induces demixing of the constituent elements. In contrast, homogeneous nanostructured W-Al solid solutions are obtained by ball milling of elemental powders. These alloys show enhanced thermal stability with respect to pure W even at high homologous temperatures. Experimental evidences agree with model predictions for both the investigated systems.


Author(s):  
K. F. Russell ◽  
L. L. Horton

Beams of heavy ions from particle accelerators are used to produce radiation damage in metal alloys. The damaged layer extends several microns below the surface of the specimen with the maximum damage and depth dependent upon the energy of the ions, type of ions, and target material. Using 4 MeV heavy ions from a Van de Graaff accelerator causes peak damage approximately 1 μm below the specimen surface. To study this area, it is necessary to remove a thickness of approximately 1 μm of damaged metal from the surface (referred to as “sectioning“) and to electropolish this region to electron transparency from the unirradiated surface (referred to as “backthinning“). We have developed electropolishing techniques to obtain electron transparent regions at any depth below the surface of a standard TEM disk. These techniques may be applied wherever TEM information is needed at a specific subsurface position.


1993 ◽  
Vol 90 ◽  
pp. 249-254 ◽  
Author(s):  
C Wolverton ◽  
M Asta ◽  
S Ouannasser ◽  
H Dreyssé ◽  
D de Fontaine

2010 ◽  
Vol 48 (2) ◽  
pp. 163-168 ◽  
Author(s):  
Hyunkwon Shin ◽  
Hyeongjae Lee ◽  
Hyeongjae Yoo ◽  
Ki-Soo Lim ◽  
Myeongkyu Lee

Sign in / Sign up

Export Citation Format

Share Document