Leaching and Recovery of Molybdenum from Spent Catalysts

Author(s):  
Mirjana Vemic ◽  
Francois Bordas ◽  
Gilles Guibaud ◽  
Piet N. L. Lens ◽  
Eric D. van Hullebusch
Keyword(s):  
Author(s):  
Monica Dapiaggi ◽  
Marco Alloni ◽  
Riccardo Carli ◽  
Nicola Rotiroti ◽  
Giorgia Confalonieri

Abstract The paper presents a quick method for the quantification of nickel species in spent FFC catalysts; the quantification of known quantities NiO and $$\hbox{NiAl}_2\hbox{O}_{4}$$ NiAl 2 O 4 is first done in a matrix of fresh zeolite Y, and then in a complex matrix, similar to the one of a real spent catalyst. The method is carefully checked and the errors in the quantification are critically evaluated. After the validation of the method with known quantities of NiO, well below the law limit for direct re-use, a set of real spent catalysts (representative of a period of 12 months) is analysed. Graphic Abstract


Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2289
Author(s):  
Haihui Fu ◽  
Yan Chen ◽  
Tingting Liu ◽  
Xuemei Zhu ◽  
Yufei Yang ◽  
...  

Fluid catalytic cracking (FCC) spent catalysts are the most common catalysts produced by the petroleum refining industry in China. The National Hazardous Waste List (2016 edition) lists FCC spent catalysts as hazardous waste, but this listing is very controversial in the petroleum refining industry. This study collects samples of waste catalysts from seven domestic catalytic cracking units without antimony-based passivation agents and identifies their hazardous characteristics. FCC spent catalysts do not have the characteristics of flammability, corrosiveness, reactivity, or infectivity. Based on our analysis of the components and production process of the FCC spent catalysts, we focused on the hazardous characteristic of toxicity. Our results show that the leaching toxicity of the heavy metal pollutants nickel, copper, lead, and zinc in the FCC spent catalyst samples did not exceed the hazardous waste identification standards. Assuming that the standards for antimony and vanadium leachate are 100 times higher than that of the surface water and groundwater environmental quality standards, the leaching concentration of antimony and vanadium in the FCC spent catalyst of the G set of installations exceeds the standard, which may affect the environmental quality of surface water or groundwater. The quantities of toxic substances in all spent FCC catalysts, except those from G2, does not exceed the standard. The acute toxicity of FCC spent catalysts in all installations does not exceed the standard. Therefore, we exclude “waste catalysts from catalytic cracking units without antimony-based passivating agent passivation nickel agent” from the “National Hazardous Waste List.”


2019 ◽  
Vol 19 (1) ◽  
pp. 21-30
Author(s):  
Arifudin Nur ◽  
Suryo Hapsoro Tri Utomo ◽  
M. Zudhy Irawan

Abstract Expansive soils have high swelling and shrinkage potentials, which may cause damage to road structures. Therefore, stabilization is required. One method of stabilization is to use lime and spent catalysts with the aim of increasing carrying capacity and reducing swelling. Spent catalyst is a petroleum processing waste and classified as pozzolanic material. The addition of lime and spent catalysts can increase the CBR value and reduce swelling of soils. The results of this study indicate that the maximum increase in soaked CBR and unsoaked CBR values occurred in soil mixtures with optimum lime content and 12% spent catalyst with 7 days of curing. While the soil mixture with optimum lime content and 12% spent catalyst, with 7 days of curing, is the best mixture that produces soaked CBR value of 49.67%, swelling of 0.15%, and plasticity index value of 11.97%, so the soil meets the requirements to be used as pavement subgrade. Keywords: expansive soil, stabilization, road structure, subgrade, road pavement  Abstrak Tanah ekspansif memiliki potensi pengembangan dan penyusutan yang tinggi, sehingga dapat menyebabkan kerusakan struktur jalan. Oleh sebab itu, perlu dilakukan stabilisasi. Salah satu metode stabilisasi adalah menggunakan kapur dan spent catalyst dengan tujuan meningkatkan kapasitas dukung dan menurunkan swelling. Spent catalyst merupakan limbah pengolahan minyak bumi dan termasuk bahan pozzolan. Penam-bahan kapur dan spent catalyst mampu meningkatkan nilai CBR dan mereduksi swelling. Hasil studi ini menunjukkan bahwa peningkatan maksimum nilai CBR soaked maupun CBR unsoaked terjadi pada campuran tanah dengan kadar kapur optimum dan 12% spent catalyst dengan peraman 7 hari. Sedangkan campuran tanah dengan kadar kapur optimum dan 12% spent catalyst, dengan peraman 7 hari, merupakan campuran terbaik yang menghasilkan nilai CBR soaked sebesar 49,67%, swelling sebesar 0,15%, dan nilai indeks plastisitas sebesar 11,97%, sehingga tanah memenuhi syarat untuk digunakan sebagai tanah dasar perkerasan jalan. Kata-kata kunci: tanah ekspansif, stabilisasi, struktur jalan, tanah dasar, perkerasan jalan


2019 ◽  
Vol 42 (5) ◽  
pp. 1018-1026
Author(s):  
Marcelo Ramalho Amora ◽  
Marcelo E. Pacheco ◽  
Diana C. S. Azevedo ◽  
Célio L. Cavalcante ◽  
F. Murilo T. Luna
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document