The Significance of Flow Unsteadiness on the Near-Wall Flow of a Stented Artery

Author(s):  
Juan Mejia ◽  
Rosaire Mongrain ◽  
Richard Leask ◽  
Josep Cabau-Rodes ◽  
Olivier F. Bertrand
2010 ◽  
Vol 31 (8) ◽  
pp. 1521-1528 ◽  
Author(s):  
L. Goubergrits ◽  
B. Thamsen ◽  
A. Berthe ◽  
J. Poethke ◽  
U. Kertzscher ◽  
...  

2016 ◽  
Vol 796 ◽  
pp. 257-284 ◽  
Author(s):  
Christian J. Kähler ◽  
Sven Scharnowski ◽  
Christian Cierpka

The understanding and accurate prediction of turbulent flow separation on smooth surfaces is still a challenging task because the separation and the reattachment locations are not fixed in space and time. Consequently, reliable experimental data are essential for the validation of numerical flow simulations and the characterization and analysis of the complex flow physics. However, the uncertainty of the existing near-wall flow measurements make a precise analysis of the near-wall flow features, such as separation/reattachment locations and other predicted near-wall flow features which are under debate, often impossible. Therefore, the periodic hill experiment at TU Munich (ERCOFTAC test case 81) was repeated using high resolution particle image velocimetry and particle tracking velocimetry. The results confirm the strong effect of the spatial resolution on the near-wall flow statistics. Furthermore, it is shown that statistically stable values of the turbulent flow variables can only be obtained for averaging times which are challenging to realize with highly resolved large eddy simulation and direct numerical simulation techniques. Additionally, the analysis implies that regions of correlated velocity fluctuations with rather uniform streamwise momentum exist in the flow. Their size in the mean flow direction can be larger than the hill spacing. The possible impact of the correlated turbulent motion on the wake region is discussed, as this interaction might be important for the understanding and control of the flow separation dynamics on smooth bodies.


2019 ◽  
Vol 863 ◽  
pp. 407-453 ◽  
Author(s):  
Sicong Wu ◽  
Kenneth T. Christensen ◽  
Carlos Pantano

Direct numerical simulations (DNS) of turbulent channel flow over rough surfaces, formed from hexagonally packed arrays of hemispheres on both walls, were performed at friction Reynolds numbers $Re_{\unicode[STIX]{x1D70F}}=200$, $400$ and $600$. The inner normalized roughness height $k^{+}=20$ was maintained for all Reynolds numbers, meaning all flows were classified as transitionally rough. The spacing between hemispheres was varied within $d/k=2$–$4$. The statistical properties of the rough-wall flows were contrasted against a complementary smooth-wall DNS at $Re_{\unicode[STIX]{x1D70F}}=400$ and literature data at $Re_{\unicode[STIX]{x1D70F}}=2003$ revealing strong modifications of the near-wall turbulence, although the outer-layer structure was found to be qualitatively consistent with smooth-wall flow. Amplitude modulation (AM) analysis was used to explore the degree of interaction between the flow in the roughness sublayer and that of the outer layer utilizing all velocity components. This analysis revealed stronger modulation effects, compared to smooth-wall flow, on the near-wall small-scale fluctuations by the larger-scale structures residing in the outer layer irrespective of roughness arrangement and Reynolds number. A predictive inner–outer model based on these interactions, and exploiting principal component analysis (PCA), was developed to predict the statistics of higher-order moments of all velocity fluctuations, thus addressing modelling of anisotropic effects introduced by roughness. The results show excellent agreement between the predicted near-wall statistics up to fourth-order moments compared to the original statistics from the DNS, which highlights the utility of the PCA-enhanced AM model in generating physics-based predictions in both smooth- and rough-wall turbulence.


Author(s):  
C. Y. Cheong ◽  
P. T. Ireland ◽  
S. Ashforth-Frost

Theoretical predictions have been compared with experiment for a single semi-confined impinging jet. The turbulent air jet discharged at Re = 20 000 and impinged at nozzle-to-plate spacings (z/d) of 2 and 6.5. Experimental velocity profiles were obtained using hot-wire anemometry. Theoretical velocity profiles were derived using stagnation three-dimensional flow model and viscous flow model for an axisymmetric case. For z/d = 2, velocity profiles in the inviscid region of the near wall flow can be predicted accurately using the stagnation flow model. As the edge of the jet is approached, the flow becomes complex and, as expected, cannot be predicted using the model. Prediction of boundary layer profiles using the viscous flow solution for an axisymmetric case is also reasonable. For z/d = 6.5, the developing impinging jet is essentially turbulent on impact and consequently predictions of near wall flow field, using both the theoretical models, are inappropriate.


2001 ◽  
Vol 432 ◽  
pp. 127-166 ◽  
Author(s):  
K. W. BRINCKMAN ◽  
J. D. A. WALKER

Unsteady separation processes at large finite, Reynolds number, Re, are considered, as well as the possible relation to existing descriptions of boundary-layer separation in the limit Re → ∞. The model problem is a fundamental vortex-driven three-dimensional flow, believed to be relevant to bursting near the wall in a turbulent boundary layer. Bursting is known to be associated with streamwise vortex motion, but the vortex/wall interactions that drive the near-wall flow toward breakdown have not yet been fully identified. Here, a simulation of symmetric counter-rotating vortices is used to assess the influence of sustained pumping action on the development of a viscous wall layer. The calculated solutions describe a three-dimensional flow at finite Re that is independent of the streamwise coordinate and consists of a crossflow plane motion, with a developing streamwise flow. The unsteady problem is constructed to mimic a typical cycle in turbulent wall layers and numerical solutions are obtained over a range of Re. Recirculating eddies develop rapidly in the near-wall flow, but these eddies are eventually bisected by alleyways which open up from the external flow region to the wall. At sufficiently high Re, an oscillation was found to develop in the streamwise vorticity field near the alleyways with a concurrent evolution of a local spiky behaviour in the wall shear. Above a critical value of Re, the oscillation grows rapidly in amplitude and eventually penetrates the external flow field, suggesting the onset of an unstable wall-layer breakdown. Local zones of severely retarded streamwise velocity are computed which are reminiscent of the low-speed streaks commonly observed in turbulent boundary layers. A number of other features also bear a resemblance to observed coherent structure in the turbulent wall layer.


Sign in / Sign up

Export Citation Format

Share Document