Issues in Modeling Process Variants with Provop

2009 ◽  
pp. 56-67 ◽  
Author(s):  
Alena Hallerbach ◽  
Thomas Bauer ◽  
Manfred Reichert
Keyword(s):  
Process Variants ◽  
Modeling Process

Modeling of Self-Induced Vibrations that Occur During the Machining Process of Casting Patterns with the Use of The Fuzzy-Neural Networks Method

2013 ◽  
Vol 58 (3) ◽  
pp. 871-875
Author(s):  
A. Herberg
Keyword(s):  
Neural Networks ◽  
Control System ◽  
Network Structure ◽  
Fuzzy Systems ◽  
Fuzzy Neural Networks ◽  
Cnc Machining ◽  
Machining Process ◽  
Modeling Process ◽  
Fuzzy Neural ◽  
Takagi Sugeno

Abstract This article outlines a methodology of modeling self-induced vibrations that occur in the course of machining of metal objects, i.e. when shaping casting patterns on CNC machining centers. The modeling process presented here is based on an algorithm that makes use of local model fuzzy-neural networks. The algorithm falls back on the advantages of fuzzy systems with Takagi-Sugeno-Kanga (TSK) consequences and neural networks with auxiliary modules that help optimize and shorten the time needed to identify the best possible network structure. The modeling of self-induced vibrations allows analyzing how the vibrations come into being. This in turn makes it possible to develop effective ways of eliminating these vibrations and, ultimately, designing a practical control system that would dispose of the vibrations altogether.

Modeling Process of Traffic Safety Terminology with the iglos Software - A Methodological and Terminological Approach

2014 ◽  
Vol 1 (4) ◽  
pp. 263-274
Author(s):  
Ayşe Yurdakul ◽  
Eckehard Schnieder
Keyword(s):  
Traffic Safety ◽  
Modeling Process

Modeling Process Control Strategies for Simultaneous Nitrification Denitirifcation in an Oxidation Ditch

2015 ◽  
Vol 2015 (19) ◽  
pp. 4917-4929
Author(s):  
Leslie Knapp ◽  
Ann Sager ◽  
Gita Iranipour ◽  
Sarina Ergas
Keyword(s):  
Process Control ◽  
Control Strategies ◽  
Oxidation Ditch ◽  
Modeling Process

Spheric radial basis functions in Mahalanobis measuring for displaying local field features

2019 ◽  
Vol 952 (10) ◽  
pp. 2-9
Author(s):  
Yu.M. Neiman ◽  
L.S. Sugaipova ◽  
V.V. Popadyev
Keyword(s):  
Gravitational Field ◽  
Quadratic Form ◽  
Local Field ◽  
Euclidean Distance ◽  
Basis Functions ◽  
Spherical Functions ◽  
Local Models ◽  
Stationary Field ◽  
Modeling Process ◽  
The Earth

As we know the spherical functions are traditionally used in geodesy for modeling the gravitational field of the Earth. But the gravitational field is not stationary either in space or in time (but the latter is beyond the scope of this article) and can change quite strongly in various directions. By its nature, the spherical functions do not fully display the local features of the field. With this in mind it is advisable to use spatially localized basis functions. So it is convenient to divide the region under consideration into segments with a nearly stationary field. The complexity of the field in each segment can be characterized by means of an anisotropic matrix resulting from the covariance analysis of the field. If we approach the modeling in this way there can arise a problem of poor coherence of local models on segments’ borders. To solve the above mentioned problem it is proposed in this article to use new basis functions with Mahalanobis metric instead of the usual Euclidean distance. The Mahalanobis metric and the quadratic form generalizing this metric enables us to take into account the structure of the field when determining the distance between the points and to make the modeling process continuous.

scholarly journals A recommendation and risk classification system for connecting rough sleepers to essential outreach services

Data & Policy ◽  
2021 ◽  
Vol 3 ◽  
Author(s):  
Harrison Wilde ◽  
Lucia L. Chen ◽  
Austin Nguyen ◽  
Zoe Kimpel ◽  
Joshua Sidgwick ◽  
...  
Keyword(s):  
Service Providers ◽  
Modern Society ◽  
Learning System ◽  
Extreme Weather Events ◽  
Resource Limitations ◽  
Modeling Process ◽  
The People ◽  
Weather Events ◽  
Outreach Services ◽  
Data Driven Approach

Abstract Rough sleeping is a chronic experience faced by some of the most disadvantaged people in modern society. This paper describes work carried out in partnership with Homeless Link (HL), a UK-based charity, in developing a data-driven approach to better connect people sleeping rough on the streets with outreach service providers. HL's platform has grown exponentially in recent years, leading to thousands of alerts per day during extreme weather events; this overwhelms the volunteer-based system they currently rely upon for the processing of alerts. In order to solve this problem, we propose a human-centered machine learning system to augment the volunteers' efforts by prioritizing alerts based on the likelihood of making a successful connection with a rough sleeper. This addresses capacity and resource limitations whilst allowing HL to quickly, effectively, and equitably process all of the alerts that they receive. Initial evaluation using historical data shows that our approach increases the rate at which rough sleepers are found following a referral by at least 15% based on labeled data, implying a greater overall increase when the alerts with unknown outcomes are considered, and suggesting the benefit in a trial taking place over a longer period to assess the models in practice. The discussion and modeling process is done with careful considerations of ethics, transparency, and explainability due to the sensitive nature of the data involved and the vulnerability of the people that are affected.

scholarly journals An Efficient Neural Network-Based Method for Diagnosing Faults of PV Array

2021 ◽  
Vol 13 (11) ◽  
pp. 6194
Author(s):  
Selma Tchoketch_Kebir ◽  
Nawal Cheggaga ◽  
Adrian Ilinca ◽  
Sabri Boulouma
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Modeling Process ◽  
Photovoltaic Arrays ◽  
Mode Of Operation ◽  
Different Types ◽  
The Neural Networks ◽  
Operational Modes ◽  
Types Of Faults ◽  
Electrical Data

This paper presents an efficient neural network-based method for fault diagnosis in photovoltaic arrays. The proposed method was elaborated on three main steps: the data-feeding step, the fault-modeling step, and the decision step. The first step consists of feeding the real meteorological and electrical data to the neural networks, namely solar irradiance, panel temperature, photovoltaic-current, and photovoltaic-voltage. The second step consists of modeling a healthy mode of operation and five additional faulty operational modes; the modeling process is carried out using two networks of artificial neural networks. From this step, six classes are obtained, where each class corresponds to a predefined model, namely, the faultless scenario and five faulty scenarios. The third step involves the diagnosis decision about the system’s state. Based on the results from the above step, two probabilistic neural networks will classify each generated data according to the six classes. The obtained results show that the developed method can effectively detect different types of faults and classify them. Besides, this method still achieves high performances even in the presence of noises. It provides a diagnosis even in the presence of data injected at reduced real-time, which proves its robustness.

Development of program-driven plug-in for conical counter-rotating twin screw based on SolidWorks

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Liqun Dong ◽  
Junwei Zhang ◽  
Liang Qin ◽  
Ping Xue ◽  
Yun Ma ◽  
...  
Keyword(s):  
Parametric Design ◽  
Cone Angle ◽  
Three Dimensional ◽  
Visual Basic ◽  
Automatic Generation ◽  
Three Dimensional Model ◽  
Modeling Process ◽  
Basic Language ◽  
Twin Screw ◽  
Visual Basic Language

Abstract Owing to the existence of the cone angle, the size of a conical counter-rotating twin screw continuously changes along the axis, so it is not easy to model using SolidWorks. In this study, the parametric design of the modeling process is completed based on the Visual Basic language and a program-driven method. Finally, the SolidWorks program plug-in and user interface are developed to complete the automatic generation of the three-dimensional model of a conical counter-rotating twin screw.

scholarly journals Method and Application of Operational Architecture Modeling Based on Information Flow Analysis

2016 ◽  
Vol 4 (1) ◽  
pp. 40-55
Author(s):  
Yinghui Yang ◽  
Jianhua Li ◽  
Qingwei Meng ◽  
Mingli Nan
Keyword(s):  
Information Flow ◽  
Process Analysis ◽  
Flow Analysis ◽  
Modeling Framework ◽  
Operational Process ◽  
Information Flow Analysis ◽  
Modeling Process ◽  
Architecture Framework ◽  
Architecture Modeling ◽  
Operational Activity

Abstract To strengthen operational process analysis and normalize information requirements description in systemic operations based on information systems, a new operational architecture modeling method is proposed from the perspective of information flow analysis. An operational architecture modeling framework based on information flow analysis is established by referring to American department of defense architecture framework (DoDAF V2.0). Concepts of entities, relationships, attributes and mapping rules are defined. Operational activity model, operational nod model and information alternation model are constructed. Finally, aerial assault operation is taken as an example to demonstrate the modeling process. Simulation results show that operational process analysis is more refined and information requirement descriptions are more visible, normal and clear, which validate the feasibility and validity of the method and models.

Understanding Structural Factors and Actor Attributes That Impact the Development of Cohesion within a Participatory Modeling Process

2020 ◽  
Vol 48 (6) ◽  
pp. 577-600
Author(s):  
Taylor Goelz ◽  
Andrew Scheld ◽  
Troy Hartley ◽  
Inga Carboni
Keyword(s):  
Structural Factors ◽  
Participatory Modeling ◽  
Modeling Process
Sign in / Sign up

Export Citation Format

Share Document