2015 ◽  
Vol 137 (2) ◽  
Author(s):  
Matthew R. Pearson ◽  
Jamal Seyed-Yagoobi

Heat pipes are well known as simple and effective heat transport devices, utilizing two-phase flow and the capillary phenomenon to remove heat. However, the generation of capillary pressure requires a wicking structure and the overall heat transport capacity of the heat pipe is generally limited by the amount of capillary pressure generation that the wicking structure can achieve. Therefore, to increase the heat transport capacity, the capillary phenomenon must be either augmented or replaced by some other pumping technique. Electrohydrodynamic (EHD) conduction pumping can be readily used to pump a thin film of a dielectric liquid along a surface, using electrodes that are embedded into the surface. In this study, two two-phase heat transport devices are created. The first device transports the heat in a linear direction. The second device transports the heat in a radial direction from a central heat source. The radial pumping configuration provides several advantages. Most notably, the heat source is wetted with fresh liquid from all directions, thereby reducing the amount of distance that must be travelled by the working fluid. The power required to operate the EHD conduction pumps is a trivial amount relative to the heat that is transported.


2010 ◽  
Vol 50 (8) ◽  
pp. 1071-1077 ◽  
Author(s):  
Toshihiro Tanaka ◽  
Yumi Ogiso ◽  
Mitsuru Ueda ◽  
Joonho Lee
Keyword(s):  

2017 ◽  
Vol 2017.23 (0) ◽  
pp. 1903
Author(s):  
Hiroaki MAEDA ◽  
Kazuyuki ITAGAKI ◽  
Kan SUGIYAMA ◽  
Yuki HIRATA ◽  
Shinya SASAKI

2018 ◽  
Vol 40 (1) ◽  
pp. 127-138
Author(s):  
Nan Zhang ◽  
Bin Cheng ◽  
Hexi Baoyin

Science ◽  
1921 ◽  
Vol 54 (1386) ◽  
pp. 74-74 ◽  
Author(s):  
J. Alexander
Keyword(s):  

1999 ◽  
Author(s):  
Vladimir I. Ledenev ◽  
Vladimir A. Karasev ◽  
Vladimir P. Yakunin

2013 ◽  
Vol 562-565 ◽  
pp. 251-254
Author(s):  
Yun Li He ◽  
Hai Peng Liu ◽  
Shi Qiao Gao ◽  
Cai Feng Wang

In MEMS, the size of micro-structure is usually in the micron and even nanoscale. It's easier to form capillary phenomenon than the macroscopic system. In view of this phenomenon, this article is based on the micro-mechanical gyroscope as the research object, to analyze the occurrence of capillary condensation of adhesion phenomenon. Firstly, we derive the Kelvin equation for capillary condensation, and then combination of the Kelvin equation introduce the capillary condensation of the adhesion phenomenon; Secondly, it analyzes the dynamics characteristics of its structure existing the liquid bridge, and analyzes the causes of the liquid bridge; Finally, it analyzes the capillary adhesion phenomena on the performance of the micro-mechanical gyroscope,as well as how to avoid the generation of capillary condensation adhesion.


Sign in / Sign up

Export Citation Format

Share Document