Symbolic computation for the Determination of the Minimal direct kinematics Polynomial and the Singular configurations of parallel manipulators

1991 ◽  
pp. 465-475 ◽  
Author(s):  
J.-P. Merlet
Keyword(s):  
Symbolic Computation ◽  
Parallel Manipulators ◽  
Singular Configurations ◽  
Direct Kinematics

Determination of singularity contours for five-bar planar parallel manipulators

Robotica ◽  
2000 ◽  
Vol 18 (5) ◽  
pp. 569-575 ◽  
Author(s):  
Gürsel Alıcı
Keyword(s):  
Parallel Manipulators ◽  
Joint Space ◽  
Point Of View ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Singular Configurations ◽  
Planning And Design ◽  
Prismatic Joints ◽  
Planar Parallel Manipulators

From a design point of view, it is crucial to predict singular configurations of a manipulator in terms of inputs in order to improve the dexterity and workspace of a manipulator. In this paper, we present a simple, yet a systematic appoach to obtain singularity contours for a class of five-bar planar parallel manipulators which are based on five rigid links and five single degree of freedom joints – revolute and prismatic joints. The determinants of the manipulator Jacobian matrices are evaluated in terms of joint inputs for a specified set of geometric parameters, and the contours of the determinants at 0.0 plane which are the singularity contours in joint space are generated for the three types of singularities reported in the literature. The proposed approach/algorithm is simple and systematic, and the resulting equations are easy to solve on a computer. The singularity contours for all the class are presented in order to demonstrate the method. It is concluded that the proposed method is useful in trajectory planning and design of five-bar planar parallel manipulators in order to improve their dexterity and workspace.

On the direct problem singularities of a class of 3-DOF parallel manipulators

Robotica ◽  
2004 ◽  
Vol 22 (4) ◽  
pp. 389-394 ◽  
Author(s):  
R. Di Gregorio
Keyword(s):  
Rigid Body ◽  
Direct Problem ◽  
Parallel Manipulators ◽  
Degree Of Freedom ◽  
Kinematic Pair ◽  
Kinematic Chains ◽  
Position Analysis ◽  
Direct Kinematics ◽  
Relative Motions

The 3-PS structure features one rigid body (platform) connected to another rigid body (base) by means of three kinematic chains (limbs) of type PS (P and S stand for prismatic pair and spherical pair, respectively). All the 3-degree-of-freedom parallel manipulators with three connectivity-5 limbs, each one constituted of one passive (i.e. not actuated) prismatic pair, one passive spherical pair and one actuated kinematic pair of any type, become 3-PS structures when the actuated pairs are locked. Direct kinematics of this class of manipulators is tied to the properties of the 3-PS structure. In particular, the direct position analysis is tied to the assembly modes of the 3-PS structure; whereas the determination of the singularities of the direct instantaneous problem is tied to the determination of the singular geometries of the 3-PS structure, where instantaneous relative motions between platform and base are possible. The solution of these two problems is necessary both for designing the manipulators and for controlling them during motion. This paper deal with the determination of the singular geometries of the 3-PS structure.

scholarly journals On one approach to the approximation of solutions to the direct kinematics problem of parallel manipulators

2020 ◽  
Vol 10 (1) ◽  
pp. 65-70
Author(s):  
Andrei Gorchakov ◽  
Vyacheslav Mozolenko
Keyword(s):  
Neural Network ◽  
Bounded Function ◽  
Parallel Manipulators ◽  
Feedforward Neural Network ◽  
Numerical Implementation ◽  
Continuous Bounded Function ◽  
Space Filling ◽  
Space Filling Curves ◽  
Direct Kinematics

AbstractAny real continuous bounded function of many variables is representable as a superposition of functions of one variable and addition. Depending on the type of superposition, the requirements for the functions of one variable differ. The article investigated one of the options for the numerical implementation of such a superposition proposed by Sprecher. The superposition was presented as a three-layer Feedforward neural network, while the functions of the first’s layer were considered as a generator of space-filling curves (Peano curves). The resulting neural network was applied to the problems of direct kinematics of parallel manipulators.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

The Kinematics of Spatial Double-Triangular Parallel Manipulators

1995 ◽  
Vol 117 (4) ◽  
pp. 658-661 ◽  
Author(s):  
H. R. Mohammadi Daniali ◽  
P. J. Zsombor-Murray ◽  
J. Angeles
Keyword(s):  
Degrees Of Freedom ◽  
Quaternion Algebra ◽  
Parallel Manipulators ◽  
Numerical Examples ◽  
Six Degrees Of Freedom ◽  
Dual Number ◽  
Direct Kinematics

Two versions of spatial double-triangular mechanisms are introduced, one with three and one with six degrees of freedom. Using dual-number quaternion algebra, a formula for the direct kinematics of these manipulators is derived. Numerical examples are included.

Wrench capabilities of planar parallel manipulators. Part I: Wrench polytopes and performance indices

Robotica ◽  
2008 ◽  
Vol 26 (6) ◽  
pp. 791-802 ◽  
Author(s):  
Flavio Firmani ◽  
Alp Zibil ◽  
Scott B. Nokleby ◽  
Ron P. Podhorodeski
Keyword(s):  
Parallel Manipulators ◽  
Joint Space ◽  
Linear Mapping ◽  
Redundant Manipulators ◽  
Task Space ◽  
Performance Indices ◽  
Study Case ◽  
And Performance ◽  
Planar Parallel Manipulators

SUMMARYThis paper is organized in two parts. In Part I, the wrench polytope concept is presented and wrench performance indices are introduced for planar parallel manipulators (PPMs). In Part II, the concept of wrench capabilities is extended to redundant manipulators and the wrench workspace of different PPMs is analyzed. The end-effector of a PPM is subject to the interaction of forces and moments. Wrench capabilities represent the maximum forces and moments that can be applied or sustained by the manipulator. The wrench capabilities of PPMs are determined by a linear mapping of the actuator output capabilities from the joint space to the task space. The analysis is based upon properly adjusting the actuator outputs to their extreme capabilities. The linear mapping results in a wrench polytope. It is shown that for non-redundant PPMs, one actuator output capability constrains the maximum wrench that can be applied (or sustained) with a plane in the wrench space yielding a facet of the polytope. Herein, the determination of wrench performance indices is presented without the expensive task of generating polytopes. Six study cases are presented and performance indices are derived for each study case.

Determination of the Workspace of 6-DOF Parallel Manipulators

1989 ◽  
Author(s):  
C. Gosselin
Keyword(s):  
Parallel Manipulator ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Degree Of Freedom ◽  
Geometrical Properties ◽  
Cartesian Space ◽  
Six Degree Of Freedom

Abstract This paper presents an algorithm for the determination of the workspace of parallel manipulators. The method described here, which is based on geometrical properties of the workspace, leads to a simple graphical representation of the regions of the three-dimensional Cartesian space that are attainable by the manipulator with a given orientation of the platform. Moreover, the volume of the workspace can be easily computed by performing an integration on its boundary, which is obtained from the algorithm. Examples are included to illustrate the application of the method to a six-degree-of-freedom fully-parallel manipulator.

Closed-Form Determination of the Location of a Rigid Body by Seven In-Parallel Linear Transducers

1996 ◽  
Author(s):  
Carlo Innocenti
Keyword(s):  
Rigid Body ◽  
Linear Equations ◽  
Parallel Manipulators ◽  
Rigid Bodies ◽  
Body Location ◽  
Position And Orientation ◽  
General Geometry ◽  
Two Bodies

Abstract The paper presents an original analytic procedure for unambiguously determining the relative position and orientation (location) of two rigid bodies based on the readings from seven linear transducers. Each transducer connects two points arbitrarily chosen on the two bodies. The sought-for rigid-body location simply results by solving linear equations. The proposed procedure is suitable for implementation in control of fully-parallel manipulators with general geometry. A numerical example shows application of the reported results to a case study.

Determination of the Singularity Loci of Spherical Three-Degree-of-Freedom Parallel Manipularors

1992 ◽  
Author(s):  
Clément M. Gosselin ◽  
Jaouad Sefrioui
Keyword(s):  
Graphical Representation ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Degree Of Freedom ◽  
End Effector ◽  
Cartesian Space ◽  
Singularity Locus ◽  
Three Degree Of Freedom ◽  
Analytical Expressions

Abstract In this paper, an algorithm for the determination of the singularity loci of spherical three-degree-of-freedom parallel manipulators with prismatic atuators is presented. These singularity loci, which are obtained as curves or surfaces in the Cartesian space, are of great interest in the context of kinematic design. Indeed, it has been shown elsewhere that parallel manipulators lead to a special type of singularity which is located inside the Cartesian workspace and for which the end-effector becomes uncontrollable. It is therfore important to be able to identify the configurations associated with theses singularities. The algorithm presented is based on analytical expressions of the determinant of a Jacobian matrix, a quantity that is known to vanish in the singular configurations. A general spherical three-degree-of-freedom parallel manipulator with prismatic actuators is first studied. Then, several particular designs are investigated. For each case, an analytical expression of the singularity locus is derived. A graphical representation in the Cartesian space is then obtained.

Sign in / Sign up

Export Citation Format

Share Document