Impulse and Random Tests for the Modal Parameters Evaluation of a CFR Panel

1989 ◽  
pp. 425-430
Author(s):  
P. Gaudenzi
Keyword(s):  
Modal Parameters

Effect of Bass Bar Tension on Modal Parameters of a Violin's Top Plate

2015 ◽  
Vol 39 (1) ◽  
pp. 145-149 ◽  
Author(s):  
Ewa B. Skrodzka ◽  
Bogumił B.J. Linde ◽  
Antoni Krupa
Keyword(s):  
Modal Analysis ◽  
Experimental Modal Analysis ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Normal Value ◽  
Modal Damping

Abstract Experimental modal analysis of a violin with three different tensions of a bass bar has been performed. The bass bar tension is the only intentionally introduced modification of the instrument. The aim of the study was to find differences and similarities between top plate modal parameters determined by a bass bar perfectly fitting the shape of the top plate, the bass bar with a tension usually applied by luthiers (normal), and the tension higher than the normal value. In the modal analysis four signature modes are taken into account. Bass bar tension does not change the sequence of mode shapes. Changes in modal damping are insignificant. An increase in bass bar tension causes an increase in modal frequencies A0 and B(1+) and does not change the frequencies of modes CBR and B(1-).

Improved Identification of Modal Parameters of Akashi Kaikyo Bridge

2006 ◽  
Vol 91 (3) ◽  
pp. 72-79 ◽  
Author(s):  
Hiroshi Katsuchi ◽  
Hitoshi Yamada ◽  
Shigeki Kusuhara
Keyword(s):  
Modal Parameters

scholarly journals Comparison of Mode Shapes of Carbon-Fiber-Reinforced Plastic Material Considering Carbon Fiber Direction

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 311
Author(s):  
Chan-Jung Kim
Keyword(s):  
Carbon Fiber ◽  
Modal Analysis ◽  
Dynamic Behavior ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Carbon Fiber Reinforced Plastic ◽  
Fiber Direction ◽  
Fiber Reinforced ◽  
Fiber Reinforced Plastic ◽  
Reinforced Plastic

Previous studies have demonstrated the sensitivity of the dynamic behavior of carbon-fiber-reinforced plastic (CFRP) material over the carbon fiber direction by performing uniaxial excitation tests on a simple specimen. However, the variations in modal parameters (damping coefficient and resonance frequency) over the direction of carbon fiber have been partially explained in previous studies because all modal parameters have only been calculated using the representative summed frequency response function without modal analysis. In this study, the dynamic behavior of CFRP specimens was identified from experimental modal analysis and compared five CFRP specimens (carbon fiber direction: 0°, 30°, 45°, 60°, and 90°) and an isotropic SCS13A specimen using the modal assurance criterion. The first four modes were derived from the SCS13A specimen; they were used as reference modes after verifying with the analysis results from a finite element model. Most of the four mode shapes were found in all CFRP specimens, and the similarity increased when the carbon fiber direction was more than 45°. The anisotropic nature was dominant in three cases of carbon fiber, from 0° to 45°, and the most sensitive case was found in Specimen #3.

Output-only Based Identification of Modal Parameters of Linear and Nonlinear Structures by Wavelet Transform

2021 ◽  
Vol 19 (01) ◽  
pp. 124-131
Author(s):  
Danilo D. Tannus ◽  
Diego D. G. B. Cruz ◽  
Oscar A. Z. Sotomayor
Keyword(s):  
Wavelet Transform ◽  
Modal Parameters ◽  
Nonlinear Structures ◽  
Linear And Nonlinear ◽  
Output Only

A validated robust and automatic procedure for vibration analysis of bridge structures using MEMS accelerometers

2020 ◽  
Vol 14 (3) ◽  
pp. 327-354
Author(s):  
Mohammad Omidalizarandi ◽  
Ralf Herrmann ◽  
Boris Kargoll ◽  
Steffen Marx ◽  
Jens-André Paffenholz ◽  
...  
Keyword(s):  
Vibration Analysis ◽  
Damping Ratio ◽  
Fem Analysis ◽  
Cost Effective ◽  
Analysis Procedure ◽  
Modal Parameters ◽  
Bridge Structure ◽  
Modal Damping ◽  
Mems Accelerometers ◽  
Better Than

AbstractToday, short- and long-term structural health monitoring (SHM) of bridge infrastructures and their safe, reliable and cost-effective maintenance has received considerable attention. From a surveying or civil engineer’s point of view, vibration-based SHM can be conducted by inspecting the changes in the global dynamic behaviour of a structure, such as natural frequencies (i. e. eigenfrequencies), mode shapes (i. e. eigenforms) and modal damping, which are known as modal parameters. This research work aims to propose a robust and automatic vibration analysis procedure that is so-called robust time domain modal parameter identification (RT-MPI) technique. It is novel in the sense of automatic and reliable identification of initial eigenfrequencies even closely spaced ones as well as robustly and accurately estimating the modal parameters of a bridge structure using low numbers of cost-effective micro-electro-mechanical systems (MEMS) accelerometers. To estimate amplitude, frequency, phase shift and damping ratio coefficients, an observation model consisting of: (1) a damped harmonic oscillation model, (2) an autoregressive model of coloured measurement noise and (3) a stochastic model in the form of the heavy-tailed family of scaled t-distributions is employed and jointly adjusted by means of a generalised expectation maximisation algorithm. Multiple MEMS as part of a geo-sensor network were mounted at different positions of a bridge structure which is precalculated by means of a finite element model (FEM) analysis. At the end, the estimated eigenfrequencies and eigenforms are compared and validated by the estimated parameters obtained from acceleration measurements of high-end accelerometers of type PCB ICP quartz, velocity measurements from a geophone and the FEM analysis. Additionally, the estimated eigenfrequencies and modal damping are compared with a well-known covariance driven stochastic subspace identification approach, which reveals the superiority of our proposed approach. We performed an experiment in two case studies with simulated data and real applications of a footbridge structure and a synthetic bridge. The results show that MEMS accelerometers are suitable for detecting all occurring eigenfrequencies depending on a sampling frequency specified. Moreover, the vibration analysis procedure demonstrates that amplitudes can be estimated in submillimetre range accuracy, frequencies with an accuracy better than 0.1 Hz and damping ratio coefficients with an accuracy better than 0.1 and 0.2 % for modal and system damping, respectively.

scholarly journals Identification of modal parameters of machine tools during cutting by operational modal analysis

Procedia CIRP ◽  
2018 ◽  
Vol 77 ◽  
pp. 473-476 ◽  
Author(s):  
Jan Berthold ◽  
Martin Kolouch ◽  
Volker Wittstock ◽  
Matthias Putz
Keyword(s):  
Modal Analysis ◽  
Machine Tools ◽  
Operational Modal Analysis ◽  
Modal Parameters

scholarly journals An Underdetermined Blind Source Separation Method with Application to Modal Identification

2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Gang Yu
Keyword(s):  
Blind Source Separation ◽  
Source Separation ◽  
Modal Identification ◽  
Modal Parameters ◽  
Underdetermined Blind Source Separation ◽  
Structural Dynamic ◽  
Time Frequency ◽  
Modal Response ◽  
Experimental Validations ◽  
Straight Lines

In structural dynamic analysis, the blind source separation (BSS) technique has been accepted as one of the most effective ways for modal identification, in which how to extract the modal parameters using very limited sensors is a highly challenging task in this field. In this paper, we first review the drawbacks of the conventional BSS methods and then propose a novel underdetermined BSS method for addressing the modal identification with limited sensors. The proposed method is established on the clustering features of time-frequency (TF) transform of modal response signals. This study finds that the TF energy belonging to different monotone modals can cluster into distinct straight lines. Meanwhile, we provide the detailed theorem to explain the clustering features. Moreover, the TF coefficients of each modal are employed to reconstruct all monotone signals, which can benefit to individually identify the modal parameters. In experimental validations, two experimental validations demonstrate the effectiveness of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document