The source and control of paper machine deposits

Author(s):  
T. Hassler
Keyword(s):  
2018 ◽  
Vol 7 (2.8) ◽  
pp. 472 ◽  
Author(s):  
Shruti Banerjee ◽  
Partha Sarathi Chakraborty ◽  
. .

SDN (Software Defined Network) is rapidly gaining importance of ‘programmable network’ infrastructure. The SDN architecture separates the Data plane (forwarding devices) and Control plane (controller of the SDN). This makes it easy to deploy new versions to the infrastructure and provides straightforward network virtualization. Distributed Denial-of-Service attack is a major cyber security threat to the SDN. It is equally vulnerable to both data plane and control plane. In this paper, machine learning algorithms such as Naïve Bayesian, KNN, K Means, K-Medoids, Linear Regression, use to classify the incoming traffic as usual or unusual. Above mentioned algorithms are measured using the two metrics: accuracy and detection rate. The best fit algorithm is applied to implement the signature IDS which forms the module 1 of the proposed IDS. Second Module uses open connections to state the exact node which is an attacker and to block that particular IP address by placing it in Access Control List (ACL), thus increasing the processing speed of SDN as a whole. 


2014 ◽  
Vol 705 ◽  
pp. 345-349
Author(s):  
Xian Cheng Shi ◽  
Yu Cheng Feng ◽  
Jin Song Zeng ◽  
Ke Fu Chen

A distributed cross-direction control system based on CAN-bus was designed to solve the large-scale cross-direction control problem for paper machine. Multiple Master-Slave CAN networks were constructed in parallel to coordinate and control multiple array actuators, and the Ethernet/CAN converter was used to connect the monitoring station with the field intelligent actuators. The monitoring station accesses measured data and field data via OPC technology. A CAN application layer protocol and corresponding underlying communication software were designed according to the characteristics of the cross-direction control processes. Finally, the feasibility and reliability of the system were verified with practical applications.


1993 ◽  
Vol 26 (2) ◽  
pp. 225-230 ◽  
Author(s):  
T. Rantala ◽  
P. Tarhonen ◽  
H.N. Koivo
Keyword(s):  

2012 ◽  
Vol 198-199 ◽  
pp. 1089-1092
Author(s):  
Xi Wang ◽  
Yang Zhou ◽  
Yan Qing You ◽  
Wei Tang

After introducing the principle of ventilation and dehumidification for closed steam hood, the key and difficulty points of its control are analyzed. Aiming at the production line of coating white board with surface sizing and high steam consumption, DCS system of steam hood based on SIMATIC S7-300 PLC is designed. The hardware structure and control algorithms are illustrated in detail. The control system has been applied on the paper machine with nearly 10 board paper plants of the coating white board paper base in Fuyang, Zhejiang province, and the good energy-saving control effect has been obtained.


1985 ◽  
Vol 18 (9) ◽  
pp. 117-123
Author(s):  
You-Xian Sun ◽  
Qing-Guo Wan ◽  
Yi-Qun Ying ◽  
Chun-Hui Zhou

Sign in / Sign up

Export Citation Format

Share Document