The Dynamic Characteristics Analysis of the Vertical Milling-Turning Machining Center

2016 ◽  
pp. 1143-1152
Author(s):  
Jialin Li ◽  
Yidu Zhang ◽  
Qiong Wu ◽  
Hanjun Gao
Keyword(s):  
Dynamic Characteristics ◽  
Machining Center ◽  
Vertical Milling ◽  
Characteristics Analysis ◽  
Dynamic Characteristics Analysis

Static and Dynamic Characteristics Analysis of HTM125 Milling Complex Machining Center Column

2014 ◽  
Vol 1077 ◽  
pp. 191-196
Author(s):  
Yu Hou Wu ◽  
Yu Hang Ren ◽  
De Hong Zhao ◽  
Feng Lu
Keyword(s):  
Dynamic Characteristics ◽  
Three Dimensional ◽  
Mode Shapes ◽  
Three Dimensional Model ◽  
Static And Dynamic Characteristics ◽  
Machining Center ◽  
Characteristics Analysis ◽  
Object Of Study ◽  
Five Axis ◽  
Dynamic Characteristics Analysis

The column of heavy double turret five-axis horizontal milling complex machining center is taken as the object of study. Solidworks is used to establish three-dimensional model of milling machining center column, the established modal is be imported into ANSYS Workbench for static and dynamic characteristics analysis. First, by comparing the column deformation, the stress and strain under no-load and load conditions, which is concluded that column design is too conservative and be optimized. Secondly, the modal analysis was carried out on the column, which provides a theoretical basis for the optimization of the column by getting the first six natural frequencies and mode shapes of cloud.

Dynamic Characteristics Analysis of Cable-Rib Tension Deployable Antenna

2016 ◽  
Author(s):  
Liu Ruiwei ◽  
Hongwei Guo ◽  
Zhang Qinghua ◽  
Rongqiang Liu ◽  
Tang Dewei
Keyword(s):  
Dynamic Characteristics ◽  
Structural Parameters ◽  
Element Model ◽  
Structure Design ◽  
Antenna Structure ◽  
Characteristics Analysis ◽  
New Type ◽  
Dynamic Characteristics Analysis ◽  
The Finite Element Model ◽  
Weight Dynamic

Balancing stiffness and weight is of substantial importance for antenna structure design. Conventional fold-rib antennas need sufficient weight to meet stiffness requirements. To address this issue, this paper proposes a new type of cable-rib tension deployable antenna that consists of six radial rib deployment mechanisms, numerous tensioned cables, and a mesh reflective surface. The primary innovation of this study is the application of numerous tensioned cables instead of metal materials to enhance the stiffness of the entire antenna while ensuring relatively less weight. Dynamic characteristics were analyzed to optimize the weight and stiffness of the antenna with the finite element model by subspace method. The first six orders of natural frequencies and corresponding vibration modes of the antenna structure are obtained. In addition, the effects of structural parameters on natural frequency are studied, and a method to improve the rigidity of the deployable antenna structure is proposed.

Dynamic Characteristics Analysis for the Headstock of a Vertical Machining Center

2016 ◽  
Vol 836-837 ◽  
pp. 348-358
Author(s):  
Zhe Li ◽  
Song Zhang ◽  
Yan Chen ◽  
Peng Wang ◽  
Ai Rong Zhang
Keyword(s):  
Dynamic Characteristics ◽  
Natural Frequencies ◽  
Vibration Characteristics ◽  
Numerical Control ◽  
Vibration Test ◽  
Machining Accuracy ◽  
Modal Test ◽  
Machining Center ◽  
Characteristics Analysis ◽  
Nc Machine

Dynamic characteristics of numerical control (NC) machine tools, such as natural frequency and vibration property, directly affect machining efficiency and finished surface quality. In general, low-order natural frequencies of critical components have significant influences on machine tool’s performances. The headstock is the most important component of the machine tool. The reliability, cutting stability, and machining accuracy of a machining center largely depend on the structure and dynamic characteristics of the headstock. First, in order to obtain the natural frequencies and vibration characteristics of the headstock of a vertical machining center, modal test and vibration test in free running and cutting conditions were carried out by means of the dynamic signal collection and analysis system. According to the modal test, the first six natural frequencies of the headstock were obtained, which can not only guide the working speed, but also act as the reference of structural optimization aiming at frequency-shift. Secondly, by means of the vibration test, the vibration characteristics of the headstock were obtained and the main vibration sources were found out. Finally the corresponding vibration reduction plans were proposed in this paper. That provides the reference for improving the performance of the overall unit.

Dynamic Characteristics Analysis of an Ambulance with Hydraulically Interconnected Suspension System

2018 ◽  
Author(s):  
Bohuan Tan ◽  
Yang Wu ◽  
Nong Zhang ◽  
Bangji Zhang ◽  
Minyi Zheng ◽  
...  
Keyword(s):  
Dynamic Characteristics ◽  
Suspension System ◽  
Characteristics Analysis ◽  
Dynamic Characteristics Analysis
Sign in / Sign up

Export Citation Format

Share Document