Natural Gas Combustion in Marine Engines: An Operational, Environmental, and Economic Assessment

2018 ◽  
pp. 169-213
Author(s):  
Roussos G. Papagiannakis ◽  
Theodoros C. Zannis ◽  
Efthimios G. Pariotis ◽  
John S. Katsanis
Keyword(s):  
Natural Gas ◽  
Economic Assessment ◽  
Gas Combustion ◽  
Marine Engines ◽  
Natural Gas Combustion

Research of pressure influence in the gas supply system on the energy consuption level of gas devices

2019 ◽  
Vol 6 (2) ◽  
pp. 56-63
Author(s):  
L. D. Pylypiv ◽  
І. І. Maslanych
Keyword(s):  
Natural Gas ◽  
Residential Buildings ◽  
Supply System ◽  
Normal Operation ◽  
Gas Combustion ◽  
Efficient Operation ◽  
Gas Consumption ◽  
Natural Gas Combustion ◽  
Gas Supply

There are investigated the influence of operating pressures in the gas supply system on the level of such energy indicators as efficiency, gas flow and gas overrun by gas equipment in residential buildings. There is established a relationship between the values of operating pressures in the gas supply system and the gas consumption level of household appliances. The causes of insufficient pressure in the gas networks of settlements are analyzed in the article. There is also developed an algorithm for calculating the change in the efficiency of gas appliances depending on the operational parameters of the gas network. It has been found that the most efficient operation of gas appliances is observed at an overpressure at the inlet of gas appliances of about 1200 Pa.To ensure the required quality of natural gas combustion among consumers and minimize gas consumption there are justified the following measures in the article: coordinating a domestic regulatory framework for assessing the quality of natural gas with international norms and standards; improving the preparation of gas coming from local wells before supplying it to gas distribution networks; auditing low pressure gas pipelines and reconstructing areas affected by corrosion; ensuring standard gas pressure in the network for the normal operation of domestic gas appliances; stating quality indicators of natural gas combustion by gas sales organizations.

Multiflame Patterns in Swirl-Driven Partially Premixed Natural Gas Combustion

2002 ◽  
Vol 125 (1) ◽  
pp. 40-45 ◽  
Author(s):  
K. P. Vanoverberghe ◽  
E. V. Van den Bulck ◽  
M. J. Tummers ◽  
W. A. Hu¨bner
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Gas Flow ◽  
State Transition ◽  
Gas Combustion ◽  
Bifurcation Phenomena ◽  
Major Species ◽  
Partially Premixed ◽  
Natural Gas Combustion ◽  
Low Nox Emission

Five different flame states are identified in a compact combustion chamber that is fired by a 30 kW swirl-stabilized partially premixed natural gas burner working at atmospheric pressure. These flame states include a nozzle-attached tulip shaped flame, a nonattached torroidal-ring shaped flame (SSF) suitable for very low NOx emission in a gas turbine combustor and a Coanda flame (CSF) that clings to the bottom wall of the combustion chamber. Flame state transition is generated by changing the swirl number and by premixing the combustion air with 70% of the natural gas flow. The flame state transition pathways reveal strong hysteresis and bifurcation phenomena. The paper also presents major species concentrations, temperature and velocity profiles of the lifted flame state and the Coanda flame and discusses the mechanisms of flame transition and stabilization.

Development of a Natural Gas Combustion System for High Specific Power

MTZ worldwide ◽  
2015 ◽  
Vol 76 (10) ◽  
pp. 30-35
Author(s):  
Bertold Hüchtebrock ◽  
José Geiger ◽  
Avnish Dhongde ◽  
Harsh Sankhla
Keyword(s):  
Natural Gas ◽  
Specific Power ◽  
Combustion System ◽  
Gas Combustion ◽  
High Specific Power ◽  
Natural Gas Combustion

Sequential-Based Process Modeling of Natural Gas Combustion in a Fluidized Bed Reactor

2012 ◽  
Vol 26 (4) ◽  
pp. 2058-2067 ◽  
Author(s):  
Abolhasan Hashemi Sohi ◽  
Ali Eslami ◽  
Amir Sheikhi ◽  
Rahmat Sotudeh-Gharebagh
Keyword(s):  
Natural Gas ◽  
Fluidized Bed ◽  
Process Modeling ◽  
Fluidized Bed Reactor ◽  
Gas Combustion ◽  
Natural Gas Combustion

Large-eddy simulation of direct injection natural gas combustion in a heavy-duty truck engine using modified conditional moment closure model with low-dimensional manifold method

2018 ◽  
Vol 21 (5) ◽  
pp. 824-837 ◽  
Author(s):  
Jian Huang ◽  
Gordon McTaggart-Cowan ◽  
Sandeep Munshi
Keyword(s):  
Natural Gas ◽  
Direct Injection ◽  
Moment Closure ◽  
Dimensional Manifold ◽  
Conditional Moment ◽  
Gas Combustion ◽  
Conditional Moment Closure ◽  
Natural Gas Combustion ◽  
Low Dimensional ◽  
Low Dimensional Manifold

This article describes the application of a modified first-order conditional moment closure model used in conjunction with the trajectory-generated low-dimensional manifold method in large-eddy simulation of pilot ignited high-pressure direct injection natural gas combustion in a heavy-duty diesel engine. The article starts with a review of the intrinsic low-dimensional manifold method for reducing detailed chemistry and various formulations for the construction of such manifolds. It is followed by a brief review of the conditional moment closure method for modelling the interaction between turbulence and combustion chemistry. The high computational cost associated with the direct implementation of the basic conditional moment closure model was discussed. The article then describes the formulation of a modified approach to solve the conditional moment closure equation, whose reaction source terms for the conditional mass fractions for species were obtained by projecting the turbulent perturbation onto the reaction manifold. The main model assumptions were explained and the resulting limitations were discussed. A numerical experiment was conducted to examine the validity the model assumptions. The model was then implemented in a combustion computational fluid dynamics solver developed on an open-source computational fluid dynamics platform. Non-reactive jet simulations were first conducted and the results were compared to the experimental measurement from a high-pressure visualization chamber to verify that the jet penetration under engine relevant conditions was correctly predicted. The model was then used to simulate natural gas combustion in a heavy-duty diesel engine equipped with a high-pressure direct injection system. The simulation results were compared with the experimental measurement from a research engine to verify the accuracy of the model for both the combustion rate and engine-out emissions.

Sign in / Sign up

Export Citation Format

Share Document