Effect of temperature on nitrogen-limited growth rate and chemical composition of Ulva curvata (Ulvales: Chlorophyta)

1989 ◽  
Vol 100 (2) ◽  
pp. 143-150 ◽  
Author(s):  
C. S. Duke ◽  
W. Litaker ◽  
J. Ramus
Keyword(s):  
Growth Rate ◽  
Chemical Composition ◽  
Effect Of Temperature ◽  
Limited Growth

Comparison of copper sulphate pentahydrate growth rates determined by different methods

1990 ◽  
Vol 55 (7) ◽  
pp. 1691-1707 ◽  
Author(s):  
Miloslav Karel ◽  
Jiří Hostomský ◽  
Jaroslav Nývlt ◽  
Axel König
Keyword(s):  
Growth Rate ◽  
Crystal Growth ◽  
Fluidized Bed ◽  
Growth Rates ◽  
Copper Sulphate ◽  
Crystal Growth Rate ◽  
Effect Of Temperature ◽  
Rotating Disc ◽  
Shape Factors ◽  
Data Treatment

Crystal growth rates of copper sulphate pentahydrate (CuSO4.5 H2O) determined by different authors and methods are compared. The methods included in this comparison are: (i) Measurement on a fixed crystal suspended in a streaming solution, (ii) measurement on a rotating disc, (iii) measurement in a fluidized bed, (iv) measurement in an agitated suspension. The comparison involves critical estimation of the supersaturation used in measurements, of shape factors used for data treatment and a correction for the effect of temperature. Conclusions are drawn for the choice of values to be specified when data of crystal growth rate measurements are published.

Thermal Parameters, Microstructure and Porosity During Transient Solidification of Ternary Al–Cu–Si Alloys

2012 ◽  
Vol 730-732 ◽  
pp. 883-888 ◽  
Author(s):  
Daniel J. Moutinho ◽  
Laércio G. Gomes ◽  
Otávio L. Rocha ◽  
Ivaldo L. Ferreira ◽  
Amauri Garcia
Keyword(s):  
Growth Rate ◽  
Chemical Composition ◽  
Cooling Rate ◽  
Tip Growth ◽  
Thermal Parameters ◽  
Volumetric Fraction ◽  
Dendritic Network ◽  
Intermetallic Particles ◽  
Casting Length

Solidification of ternary Al-Cu-Si alloys begins with the development of a complex dendritic network typified by primary (λ1) and secondary (λ2) dendrite arm spacings which depend on the chemical composition of the alloy and on the casting thermal parameters such as the growth rate and the cooling rate. These thermal parameters control the scale of dendritic arms, the size and distribution of porosity and intermetallic particles in the casting. In this paper, λ1and λ2were correlated with experimental thermal parameters i.e., the tip growth rate and the tip cooling rate. The porosity profile along the casting length has also been experimentally determined. The volumetric fraction of pores increase with the increase in alloying Si and with the increase in Fe concentration at the regions close to the casting cooled surface.

Scaling Behavior of Superheater Tube Alloys in ASME High Temperature Steam Research Tests at 1100–1500 F

1962 ◽  
Vol 84 (3) ◽  
pp. 223-257 ◽  
Author(s):  
F. Eberle ◽  
C. H. Anderson
Keyword(s):  
High Temperature ◽  
Chemical Composition ◽  
Thermal Shock ◽  
Thermal Shock Resistance ◽  
Scaling Behavior ◽  
Effect Of Temperature ◽  
Relative Resistance ◽  
Superheater Tube ◽  
Shock Resistance ◽  
High Temperature Steam

The scales formed on seven ferritic and ten austenitic types of commercial tubing presently in use and of potential future use for superheater service were examined after 6, 12, and 18 months’ exposure to air and to flowing steam of 2000 psi at temperatures of 1100, 1200, 1350, and 1500 F. The effect of temperature and time of exposure on the adherence, thermal-shock resistance, thickness, structure, and chemical composition of the scales was investigated and the relative resistance to scaling of the various alloys evaluated.

Sign in / Sign up

Export Citation Format

Share Document