Production of lightweight refractory cordierite tiles

1983 ◽  
Vol 40 (1) ◽  
pp. 38-39
Author(s):  
V. N. Mokhort ◽  
V. P. Mineev ◽  
L. K. Kul'mamirov ◽  
V. V. Arbuzin ◽  
L. I. Kul'mamirova
Keyword(s):  
Lightweight Refractory

A semiautomatic machine for grinding lightweight refractory parts

Refractories ◽  
1984 ◽  
Vol 25 (1-2) ◽  
pp. 50-53
Author(s):  
D. G. Vizhunov
Keyword(s):  
Semiautomatic Machine ◽  
Lightweight Refractory

Optimizing the multilayer heat-insulating lightweight refractory linings of industrial furnaces and heat-powered units

2005 ◽  
Vol 46 (6) ◽  
pp. 432-434
Author(s):  
V. M. Zubashchenko ◽  
I. N. Kuzin
Keyword(s):  
Lightweight Refractory

Preparation of Lightweight Mullite-Anorthite Refractories by Different Routes

2018 ◽  
Vol 281 ◽  
pp. 150-155
Author(s):  
Dan Yang Zhang ◽  
Ling Qu ◽  
Wen Jie Yuan
Keyword(s):  
Thermal Conductivity ◽  
Phase Composition ◽  
Bulk Density ◽  
Apparent Porosity ◽  
Template Method ◽  
Lightweight Refractory ◽  
Sacrificial Template ◽  
Polyurethane Sponge ◽  
Main Component ◽  
Aluminate Cement

Mullite-anorthite as a kind of lightweight refractory combines the low thermal conductivity of anorthite and the excellent thermal properties of mullite. In this work, mullite beads and calcium aluminate cement was used as the main component and bonding agent. The lightweight mullite-anorthite refractory was prepared by difference routes including foaming method, addition of pore-forming agent and sacrificial template method. The phase composition, bulk density, apparent porosity and thermal conductivity of samples were compared. The results showed that anorthite formed as the consequence of the reaction of cement and mullite. Extra addition of foam, cornstarch and polyurethane sponge could decrease the bulk density of samples. The pore size of samples prepared by foaming method was the smallest. The apparent porosity of samples obtained by sacrificial template method was largest, but the thermal conductivity was the highest due to the open pores.

In Situ Growth of Mullite Whisker Using Different Aluminium Source and Properties of Mullite-Corundum Lightweight Refractory

2016 ◽  
Vol 848 ◽  
pp. 328-332 ◽  
Author(s):  
Xin Hao Li ◽  
Xing Yong Gu ◽  
Wei Xia Dong ◽  
Ting Luo
Keyword(s):  
Bending Strength ◽  
Influence Factors ◽  
Diameter Ratio ◽  
Apparent Porosity ◽  
X Ray Diffraction ◽  
Lightweight Refractory ◽  
Dry Pressing ◽  
Mullite Whiskers ◽  
Length To Diameter Ratio

In-situ growth of mullite whisker from waste coal gangue and different aluminium source mixtures by dry pressing were investigated aiming at the preparation of mullite - corundum lightweight refractory by controlling mullite whisker precursor pseudo particle size and quantity in corundum matrix. The phase composition and microstructure were studied using X-ray diffraction (XRD) and scanning electron microscope (SEM) techniques. Apparent porosity and bending strength were also measured. The samples exhibited characteristic alumina and mullite phases. The formation mechanism and influence factors for mullite whiskers materials were discussed. The experimental results showed that the whisker of the obtained sample changed from the accumulated short column to mesh cross acicular whisker shape, and the length to diameter ratio increases. When the aluminium source was aluminium hydroxide, the length to diameter ratio and apparent porosity reached the maximum of 17.6 and the minimum of 2.15%. The bending strength of all the samples was similar, that of the sample prepared by calcined bauxite was the largest (84 MPa), that of the sample prepared by calcined alumina was inferior, and the sample prepared by aluminum hydroxide was the lowest.

Production of lightweight refractory slabs for firing porcelain

1986 ◽  
Vol 43 (2) ◽  
pp. 69-70
Author(s):  
V. P. Mineev ◽  
N. N. Goncharov ◽  
O. I. Poznanskaya ◽  
K. S. Kryzhanovskii ◽  
S. A. Ruskulis
Keyword(s):  
Lightweight Refractory ◽  
Firing Porcelain

Corundum lightweight refractory with low bulk density

Refractories ◽  
1963 ◽  
Vol 4 (5-6) ◽  
pp. 237-243
Author(s):  
I. S. Kainarskii ◽  
A. N. Gaodu
Keyword(s):  
Bulk Density ◽  
Lightweight Refractory

The T-1 unit for determining the thermal strength of ultra-lightweight refractory products

Refractories ◽  
1975 ◽  
Vol 16 (1-2) ◽  
pp. 26-28
Author(s):  
V. I. Dauknis ◽  
A. I. Zabotka ◽  
A. Ya. Peras ◽  
A. I. Yanulyavichus ◽  
M. D. Karaseva ◽  
...  
Keyword(s):  
Thermal Strength ◽  
Lightweight Refractory

Analysis of Mechanical Properties of a Fibre Composite Containing Secondary Raw Materials

2014 ◽  
Vol 1077 ◽  
pp. 129-134
Author(s):  
Marcel Jogl ◽  
Pavel Reiterman ◽  
Ondřej Holčapek ◽  
Filip Vogel ◽  
Karel Kolář ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Raw Materials ◽  
Fibre Composite ◽  
Environmental Benefits ◽  
Experimental Program ◽  
Lightweight Refractory ◽  
Secondary Raw Materials ◽  
Aluminous Cement ◽  
Temperature Exposure

Fundamental tasks of material engineers are the application of materials, which can be manufactured from the less valuable materials with conservation or increasing of final properties, predominantly higher strength and durability. Present paper contributes to the category of experimental research of special composites development. Article describes the application of secondary raw materials for the production of special fibre-reinforced composite for high temperature application. These secondary raw materials are arising by the recycling of waste produced in the building industry or by the recycling of cast-off materials. Aim of performed experimental program was to prepare lightweight refractory materials based on aluminous cement with sufficient mechanical properties. Application of secondary raw materials could be interesting solution with environmental benefits. Investigation of new type of fire resistant composites were realized on the base mechanical properties determination after high temperature exposure.

Production and service of lightweight refractory aluminosilicate concretes

2006 ◽  
Vol 47 (4) ◽  
pp. 199-200 ◽  
Author(s):  
M. N. Dunaeva
Keyword(s):  
Lightweight Refractory

Combined heat insulation from lightweight refractory and heat-resistant concrete

Refractories ◽  
1971 ◽  
Vol 12 (3-4) ◽  
pp. 174-176 ◽  
Author(s):  
K. D. Nekrasov ◽  
A. P. Tarasova ◽  
M. G. Maslennikova ◽  
M. A. Rabinovich ◽  
M. D. Karaseva
Keyword(s):  
Heat Insulation ◽  
Lightweight Refractory ◽  
Heat Resistant
Sign in / Sign up

Export Citation Format

Share Document