The article presents the results of the prototype magneto-levitation bogie for the transport of containers using the technology of magneto-dynamic levitation «Inductrack». The main elements of the prototype bogie are: - supporting welded steel frame, which is attached to the container stops, blocks, magnets, support and guide wheels; - the magnets are combined into blocks according to the scheme «an Array of Halbach»; - shunting wheel required for pre-acceleration of the bogie (with levitation wheels not touching the track structure); - guide wheels, which serve for centering the bogie on the road when driving on a plot of acceleration. Cart design was developed taking into account the possibility of placing massive superconductors instead of permanent magnets. Carts are designed to carry containers of various types, it does not require additional devices for connecting the carriages together. To assess the strength of the construction was taken following calculation modes: - the moving bogie, when you turn on linear synchronous motor, a trolley supported by shunting wheel and operate the inertial load; - braking when the bogie is in magneto-levitation flight support with the maneuvering of the wheel is missing, there are inertial load; - support bogie magnets on when the bogie is in magneto-levitation flight; - support the trolley on the shunting wheel, the linear synchronous motor is turned off. The calculation was carried out by finite element method using the design package «Ansys Workbench».
Design Modification of Automated Power Window Circuit System for Automobiles Air -Condition.