scholarly journals Mechanical properties of sunflower oil under pressure

Author(s):  
L. T. Pawlicki ◽  
A. J. Rostocki ◽  
D. B. Tefelski ◽  
R. M. Siegoczyński ◽  
S. Ptasznik

AbstractThis article presents the results of research on the influence of high pressure on the mechanical properties of sunflower oil. The pressure value was changed by the stepwise method to obtain thermodynamic equilibrium. Dependencies of changes in the volume and compressibility of sunflower oil on pressure were investigated. A discontinuous (step) change was observed indicating the appearance of the first order phase transformation. The phase transition for sunflower oil was observed in the pressure range from 450 to 500 MPa after about 170 h. Most likely, then, there was a change to the double crystal phase. The time after which this transformation took place was the longest of all times that the authors have observed so far for the study.

Author(s):  
Valeri Brouskov ◽  
Michael Hanfland ◽  
Rainer Pöttgen ◽  
Ulrich Schwarz

AbstractStructural properties of the ternary intermetallic compound CeAuGe were investigated at hydrostatic pressures up to 15 GPa with high-resolution angle dispersive X-ray powder diffraction using synchrotron radiation and the diamond anvil cell technique. At 8.7(7) GPa a first order phase transition is observed from a hexagonal NdPtSb-type arrangement into an orthorhombic high-pressure modification with a TiNiSi-type crystal structure. The transformation is associated with a 3% shortening of the lattice parameter perpendicular to the puckered layers [AuGe]


Entropy ◽  
2021 ◽  
Vol 24 (1) ◽  
pp. 31
Author(s):  
Víctor F. Correa ◽  
Facundo J. Castro

We describe a first-order phase transition of a simple system in a process where the volume is kept constant. We show that, unlike what happens when the pressure is constant, (i) the transformation extends over a finite temperature (and pressure) range, (ii) each and every extensive potential (internal energy U, enthalpy H, Helmholtz energy F, and Gibbs energy G), and the entropy S is continuous across the transition, and (iii) the constant-volume heat capacity does not diverge during the transition and only exhibits discrete jumps. These non-intuitive results highlight the importance of controlling the correct variables in order to distinguish between continuous and discontinuous transitions. We apply our results to describe the transition between ice VI and liquid water using thermodynamic information available in the literature and also to show that a first-order phase transition driven in isochoric condition can be used as the operating principle of a mechanical actuator.


2000 ◽  
Vol 56 (2) ◽  
pp. 310-316 ◽  
Author(s):  
Robert E. Dinnebier ◽  
Stefan Carlson ◽  
Sander van Smaalen

The pressure dependence of the crystal structure of cubic tetrakis(trimethylsilyl)methane C[Si(CH3)3]4 (TC) (P < 16.0 GPa, T = 298 K) is reported using high-resolution angle-dispersive X-ray powder diffraction. The compound has crystal structures with the molecules in a cubic-close-packed (c.c.p.) arrangement. It shows three phase transitions in the measured pressure range. At ambient conditions, TC has space group Fm{\bar 3}m (Z = 4) with a = 12.8902 (2) Å, V = 2141.8 (1) Å3 (phase I). Between 0 and 0.13 GPa TC exhibits a first-order phase transition into a structure with space group Pa{\bar 3} (phase II). A second first-order phase transition occurs between 0.2 and 0.28 GPa into a structure with space group P213 (phase III). Under non-hydrostatic pressure conditions (P > 10  GPa) a transformation is observed into a c.c.p. structure that is different from the face-centred-cubic structure at ambient conditions. A non-linear compression behaviour is observed, which could be described by a Vinet relation in the range 0.28–4.8 GPa. The extrapolated bulk modulus of the high-pressure phase III was determined to be K 0 = 7.1 (8) GPa. The crystal structures in phase III are refined against X-ray powder data measured at several pressures between 0.49 and 4.8 GPa, and the molecules are found to be fully ordered. This is interpreted to result from steric interactions between neighbouring molecules, as shown by analysing the pressure dependence of intramolecular angles, torsion angles and intermolecular distances. Except for their cell dimensions, phases I, II and III are found to be isostructural to the corresponding phases at low temperatures.


2008 ◽  
Vol 20 (42) ◽  
pp. 425216 ◽  
Author(s):  
A Tatsi ◽  
E Stavrou ◽  
Y C Boulmetis ◽  
A G Kontos ◽  
Y S Raptis ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document