The experimental study on the boiling bubble behaviors and heat transfer performance of the deionized water across various pin fins

Author(s):  
Junye Hua ◽  
Wenxin Hou ◽  
Gui Li ◽  
Luwen Qin ◽  
Dong Li ◽  
...  
Author(s):  
Yu Rao ◽  
Chaoyi Wan ◽  
Shusheng Zang

An experimental study was conducted to investigate the friction and heat transfer performance of air transitional flow in a rectangular channel with staggered arrays of short pin fins with transverse spacing-to-diameter of 1.5 and streamwise spacing-to-diameter ratio of 2.5. The friction factor, averaged Nusselt number and the overall thermal performance of the transitional flow have been obtained, and compared with Metzger’s pin fin channel with transverse spacing-to-diameter of 2.5 and streamwise spacing-to-diameter ratio of 2.5. The experimental study has showed that in the Reynolds number range of 1678–8500, the pin fin channel with transverse spacing-to-diameter of 1.5 has a higher convective heat transfer performance, but the enhancement capability decreases with the Reynolds number. For Re <6000, the overall thermal performance of the pin fin channel with transverse spacing-to-diameter of 1.5 is higher than the pin fin channel transverse spacing-to-diameter of 2.5, however for Re >6000 the overall thermal performance of the former is lower than the latter. For both of the pin fin channels, the overall thermal performance gets highest when the flow transition occurs.


2012 ◽  
Vol 197 ◽  
pp. 216-220
Author(s):  
Zhong Chao Zhao ◽  
Rui Ye ◽  
Gen Ming Zhou

To solve the cooling problem in modern electronic device, a kind of heat pipe radiator was designed and manufactured in this paper. The heat transfer performance of heat pipe radiator and its relationship with air velocity were investigated by experimental method. The experimental results show that the heat pipe radiator can meet the temperature requirement of electronic device with the power range from 40W to 160W. To keep the operational temperature of electronic device with power of 160W under 75°C,the air velocity should be keep at 1.7m/s. The heat dissipation performance of heat pipe radiator was enhanced with the air velocity increased from 0.2m/s to 1.7m/s.for the electronic equipment with power of 160W.


Sign in / Sign up

Export Citation Format

Share Document