Crystallization of poly(l-lactide) in the miscible poly(l-lactide)/poly(vinyl acetate) blend induced by carbon nanotubes

2017 ◽  
Vol 75 (6) ◽  
pp. 2641-2655 ◽  
Author(s):  
Ting Huang ◽  
Jing-hui Yang ◽  
Nan Zhang ◽  
Ji-hong Zhang ◽  
Yong Wang
Polymer ◽  
2009 ◽  
Vol 50 (14) ◽  
pp. 3072-3078 ◽  
Author(s):  
Li Liu ◽  
Yong Wang ◽  
Yanli Li ◽  
Jun Wu ◽  
Zuowan Zhou ◽  
...  

2004 ◽  
Vol 58 (30) ◽  
pp. 3967-3970 ◽  
Author(s):  
Sha-Ni Li ◽  
Zhong-Ming Li ◽  
Ming-Bo Yang ◽  
Zong-Qian Hu ◽  
Xiang-Bin Xu ◽  
...  

Polymers ◽  
2017 ◽  
Vol 9 (12) ◽  
pp. 397 ◽  
Author(s):  
Li-Chuan Jia ◽  
Zhong-Han Jiao ◽  
Ding-Xiang Yan ◽  
Zhong-Ming Li

2011 ◽  
Vol 364 ◽  
pp. 427-433 ◽  
Author(s):  
Mohamad Yatim Norazlina ◽  
Yusof Faridah ◽  
Chantara Thevy Ratnam ◽  
Iis Sopyan

The effect of irradiation on the mechanical properties of Epoxidized Natural Rubber/Ethylene Vinyl Acetate/Carbon Nanotubes (ENR/EVA/CNTs) nanocomposites were investigated. CNTs at various amount (2, 3, 4 and 6 wt%) were incorporated into ENR50 by solvent casting method. The ENR/CNTs were then blended with EVA by mixing in a Brabender Plasticoder at 120°C. Next, the samples were irradiated by using electron beam with 3 MeV electron beam machine in a dose range of 50 to 200 kGy. The mechanical properties such as tensile strength (Ts), modulus at 100% elongation (M100), elongation at break (Eb) and hardness of reinforced ENR/EVA/CNTs nanocomposites were studied as a function of radiation dose. It was found that, the Ts and M100 has increased almost 2 times compared to the nanocomposites without irradiation up to 150 kGy dose of radiation, and a downward trend thereafter. Gel fraction further confirmed the powerful energy of electron beam radiation result in irradiation-induced crosslinking and further enhanced mechanical properties of the nanocomposites.


2019 ◽  
Vol 800 ◽  
pp. 195-199
Author(s):  
Anda Barkāne ◽  
Sergejs Gaidukovs ◽  
Jānis Kajaks ◽  
Oskars Platnieks

Ethylene vinyl-acetate copolymer (EVA) composite materials containing multiwall carbon nanotubes (MWCNT), graphene (Gr) and iron (III, IV) oxide (Fe3O4) nanoparticles where processed by melt blending. Film specimens were prepared by using compression moulding method. All nanoparticles content in samples was chosen equal to 20 wt.%. The material dielectric spectroscopy was used in a range of 10-2 Hz to 107 Hz to investigate nanoparticle effect on the dielectric active (ε’) and passive components (ε’’), specific electrical conductivity (σ’) and dielectric loss (tg) for the characterization of the dissipation of electromagnetic energy.


Sign in / Sign up

Export Citation Format

Share Document