scholarly journals Prior Image Constrained Compressed Sensing Metal Artifact Reduction (PICCS-MAR): 2D and 3D Image Quality Improvement with Hip Prostheses at CT Colonography

2015 ◽  
Vol 26 (7) ◽  
pp. 2039-2046 ◽  
Author(s):  
Peter Bannas ◽  
Yinsheng Li ◽  
Utaroh Motosugi ◽  
Ke Li ◽  
Meghan Lubner ◽  
...  
Keyword(s):  
Quality Improvement ◽  
Image Quality ◽  
Ct Colonography ◽  
Artifact Reduction ◽  
Metal Artifact ◽  
Metal Artifact Reduction ◽  
3D Image ◽  
Hip Prostheses ◽  
Image Quality Improvement ◽  
2D And 3D

Metal artifact reduction (MAR) based on two-compartment physical modeling: evaluation in patients with hip implants

2016 ◽  
Vol 58 (1) ◽  
pp. 70-76 ◽  
Author(s):  
Johannes Boos ◽  
Lino Morris Sawicki ◽  
Rotem Shlomo Lanzman ◽  
Christoph Thomas ◽  
Joel Aissa ◽  
...  
Keyword(s):  
Image Quality ◽  
Near Field ◽  
Image Interpretation ◽  
Artifact Reduction ◽  
Metal Artifact ◽  
Metal Artifact Reduction ◽  
Hip Implants ◽  
Subjective Image Quality ◽  
Hip Prostheses ◽  
The Impact

Background Artifacts from metallic implants can hinder image interpretation in computed tomography (CT). Image quality can be improved using metal artifact reduction (MAR) techniques. Purpose To evaluate the impact of a MAR algorithm on image quality of CT examinations in comparison to filtered back projection (FBP) in patients with hip prostheses. Material and Methods Twenty-two patients with 25 hip prostheses who underwent clinical abdominopelvic CT on a 64-row CT were included in this retrospective study. Axial images were reconstructed with FBP and five increasing MAR levels (M30–34). Objective artifact strength (OAS) (SIart-SInorm) was assessed by region of interest (ROI) measurements in position of the strongest artifact (SIart) and in an osseous structure without artifact (SInorm) (in Hounsfield units [HU]). Two independent readers evaluated subjective image quality regarding metallic hardware, delineation of bone, adjacent muscle, and pelvic organs on a 5-point scale (1, non-diagnostic; 5, excellent image quality). Artifacts in the near field, far field, and newly induced artifacts due to the MAR technique were analyzed. Results OAS values were: M34: 243.8 ± 155.4 HU; M33: 294.3 ± 197.8 HU; M32: 340.5 ± 210.1 HU; M31: 393.6 ± 225.2 HU; M30: 446.8 ± 224.2 HU and FBP: 528.9 ± 227.7 HU. OAS values were significantly lower for M32–34 compared to FBP ( P < 0.01). For overall subjective image quality, results were: FBP, 2.0 ± 0.2; M30, 2.3 ± 0.8; M31, 2.6 ± 0.5; M32, 3.0 ± 0.6; M33, 3.5 ± 0.6; and M34, 3.8 ± 0.4 ( P < 0.001 for M30–M34 vs. FBP, respectively). Increasing MAR levels resulted in new artifacts in 17% of reconstructions. Conclusion The investigated MAR algorithm led to a significant reduction of artifacts from metallic hip implants. The highest MAR level provided the least severe artifacts and the best overall image quality.

Metal Artifact Reduction Software Used With Abdominopelvic Dual-Energy CT of Patients With Metal Hip Prostheses: Assessment of Image Quality and Clinical Feasibility

2014 ◽  
Vol 203 (4) ◽  
pp. 788-795 ◽  
Author(s):  
Seung Chol Han ◽  
Yong Eun Chung ◽  
Young Han Lee ◽  
Kwan Kyu Park ◽  
Myeong Jin Kim ◽  
...  
Keyword(s):  
Image Quality ◽  
Dual Energy ◽  
Dual Energy Ct ◽  
Artifact Reduction ◽  
Metal Artifact ◽  
Metal Artifact Reduction ◽  
Hip Prostheses

Impact of metal artifact reduction software on image quality of gemstone spectral imaging dual-energy cerebral CT angiography after intracranial aneurysm clipping

2017 ◽  
Vol 59 (9) ◽  
pp. 845-852 ◽  
Author(s):  
Vincent Dunet ◽  
Martine Bernasconi ◽  
Steven David Hajdu ◽  
Reto Antoine Meuli ◽  
Roy Thomas Daniel ◽  
...  
Keyword(s):  
Image Quality ◽  
Intracranial Aneurysm ◽  
Dual Energy ◽  
Artifact Reduction ◽  
Metal Artifact ◽  
Metal Artifact Reduction ◽  
Aneurysm Clipping ◽  
Gemstone Spectral Imaging ◽  
Cerebral Ct Angiography

scholarly journals Effect of metal artifact reduction software on image quality of C-arm cone-beam computed tomography during intracranial aneurysm treatment

2018 ◽  
Vol 24 (3) ◽  
pp. 303-308 ◽  
Author(s):  
Yukiko Enomoto ◽  
Keita Yamauchi ◽  
Takahiko Asano ◽  
Katharina Otani ◽  
Toru Iwama
Keyword(s):  
Computed Tomography ◽  
Image Quality ◽  
Intracranial Aneurysms ◽  
Clinical Findings ◽  
Cone Beam ◽  
Artifact Reduction ◽  
Metal Artifact ◽  
Metal Artifact Reduction ◽  
Cbct Image

Background and purpose C-arm cone-beam computed tomography (CBCT) has the drawback that image quality is degraded by artifacts caused by implanted metal objects. We evaluated whether metal artifact reduction (MAR) prototype software can improve the subjective image quality of CBCT images of patients with intracranial aneurysms treated with coils or clips. Materials and methods Forty-four patients with intracranial aneurysms implanted with coils (40 patients) or clips (four patients) underwent one CBCT scan from which uncorrected and MAR-corrected CBCT image datasets were reconstructed. Three blinded readers evaluated the image quality of the image sets using a four-point scale (1: Excellent, 2: Good, 3: Poor, 4: Bad). The median scores of the three readers of uncorrected and MAR-corrected images were compared with the paired Wilcoxon signed-rank and inter-reader agreement of change scores was assessed by weighted kappa statistics. The readers also recorded new clinical findings, such as intracranial hemorrhage, air, or surrounding anatomical structures on MAR-corrected images. Results The image quality of MAR-corrected CBCT images was significantly improved compared with the uncorrected CBCT image ( p < 0.001). Additional clinical findings were seen on CBCT images of 70.4% of patients after MAR correction. Conclusion MAR software improved image quality of CBCT images degraded by metal artifacts.

scholarly journals Evaluation of the quality of CT images acquired with smart metal artifact reduction software

2018 ◽  
Vol 13 (1) ◽  
pp. 155-162 ◽  
Author(s):  
Peng Zhou ◽  
Chunling Zhang ◽  
Zhen Gao ◽  
Wangshu Cai ◽  
Deyue Yan ◽  
...  
Keyword(s):  
Image Quality ◽  
Quantitative Assessment ◽  
Objective Assessment ◽  
Ct Images ◽  
Artifact Reduction ◽  
Metal Artifact ◽  
Metal Artifact Reduction ◽  
Metal Artifacts ◽  
Embolization Coil

AbstractObjectiveTo evaluate the practical effectiveness of smart metal artifact reduction (SMAR) in reducing artifacts caused by metallic implants.MethodsPatients with metal implants underwent computed tomography (CT) examinations on high definition CT scanner, and the data were reconstructed with adaptive statistical iterative reconstruction (ASiR) with value weighted to 40% and smart metal artifact reduction (SMAR) technology. The comparison was assessed by both subjective and objective assessment between the two groups of images. In terms of subjective assessment, three radiologists evaluated image quality and assigned a score for visualization of anatomic structures in the critical areas of interest. Objectively, the absolute CT value of the difference (ΔCT) and artifacts index (AI) were adopted in this study for the quantitative assessment of metal artifacts.ResultsIn subjective image quality assessment, three radiologists scored SMAR images higher than 40% ASiR images (P<0.01) and the result suggested that visualization of critical anatomic structures around the region of the metal object was significantly improved by using SMAR compared with 40% ASiR. The ΔCT and AI for quantitative assessment of metal artifacts showed that SMAR appeared to be superior for reducing metal artifacts (P<0.05) and indicated that this technical approach was more effective in improving the quality of CT images.ConclusionA variety of hardware (dental filling, embolization coil, instrumented spine, hip implant, knee implant) are processed with the SMAR algorithm to demonstrate good recovery of soft tissue around the metal. This artifact reduction allows for the clearer visualization of structures hidden underneath.

scholarly journals Metal About the Hip and Artifact Reduction Techniques: From Basic Concepts to Advanced Imaging

2019 ◽  
Vol 23 (03) ◽  
pp. e68-e81 ◽  
Author(s):  
Iman Khodarahmi ◽  
Amanda Isaac ◽  
Elliot K. Fishman ◽  
Danoob Dalili ◽  
Jan Fritz
Keyword(s):  
Image Quality ◽  
Pulse Sequences ◽  
Dual Energy Ct ◽  
Artifact Reduction ◽  
Metal Artifact ◽  
Metal Artifact Reduction ◽  
Reconstruction Algorithms ◽  
Radiographic Findings ◽  
Reduction Techniques ◽  
Ct Data

AbstractPromising outcomes of hip replacement interventions in this era of aging populations have led to higher demands for hip arthroplasty procedures. These require effective methods and techniques for the detection of postoperative outcomes and complications. Based on the presence or absence of radiographic findings, magnetic resonance imaging (MRI) and computed tomography (CT) may be required to detect and further characterize different causes of failing implants. Yet metal-related artifacts degrade image quality and pose significant challenges for adequate image quality. To mitigate such artifacts in MRI, a set of techniques, collectively known as metal artifact reduction sequence (MARS) MRI, were developed that optimize the framework of the conventional pulse sequences and exploit novel multispectral and multispatial imaging methods such as Slice Encoding for Metal Artifact Correction (SEMAC) and Multi-Acquisition Variable-Resonance Image Combination (MAVRIC). Metal-induced artifacts on CT can be effectively reduced with virtual monochromatic reconstruction of dual-energy CT data sets, metal artifact reduction reconstruction algorithms, and postprocessing image visualization techniques.

Sign in / Sign up

Export Citation Format

Share Document