Seismic performance of precast concrete shear wall structure with improved assembly horizontal wall connections

2018 ◽  
Vol 16 (9) ◽  
pp. 4133-4158 ◽  
Author(s):  
Wei Wang ◽  
Aiqun Li ◽  
Xingxing Wang
2012 ◽  
Vol 174-177 ◽  
pp. 2012-2015
Author(s):  
Xiao Long Zhou ◽  
Ying Min Li ◽  
Lin Bo Song ◽  
Qian Tan

There are two typical seismic damage characteristics to the masonry building with frame shear wall structure at first two stories, and the lateral stiffness ratio of the third storey to the second storey is one of the key factors mostly affecting the seismic performance of this kind of building. However, some factors are not considered sufficiently in current Chinese seismic codes. According to the theory of performance-based seismic design, the seismic performance of this kind of structure is analyzed in this paper by taking time-history analysis on models which with different storey stiffness ratios. The results show that when the lateral stiffness ratio controlled in a reasonable range, the upper masonry deformation can be ensured in a range of elastic roughly, and the bottom frame can be guaranteed to have sufficient deformation and energy dissipation capacity. Finally, according to the seismic performance characteristics of masonry building with frame shear wall structure at first two stories, especially the characteristics under strong earthquakes, a method of simplified calculation model for the upper masonry is discussed in this paper.


2013 ◽  
Vol 353-356 ◽  
pp. 1976-1980
Author(s):  
Kang Yuan ◽  
Ying Min Li ◽  
Song Bai Zhang

In the paper, the equation of stiff characteristic coefficient of shear wall structure with unidirectional wall frames was derived, the deformation characteristics of structure with different wall frames ratio and height were analyzed. Through pushover analysis, the seismic performance of structures were evaluated by interlayer displacement angle and plastic hinge development process. Under earthquake action, increase of wall frames ratio will make plastic deformation increase and maximum interlayer displacement floor move down.The bottom of structure is the weak region, the short wall limbs of wall frames are the weak structural vertical members. The research results show that the wall frames bring adverse effects on the structural seismic performance, so the different design meathods should be carried out according to the overturning moment proportion of wall frames.


2013 ◽  
Vol 477-478 ◽  
pp. 784-787
Author(s):  
Yi Zhen Yang ◽  
Hong Gan

Frame shear wall structure as a high-rise building one of the most widely used structure form, has good seismic performance and high bearing capacity, the frame shear wall structure research focused on the study of shear wall quantity more, pay attention to consider shear wall quantity and the intrinsic relationships between shear wall lateral stiffness and to seek the optimal design of shear wall stiffness, ignores the position of the shear wall, on the whole architecture of the influence of lateral stiffness, and can go, is set the location of the shear wall is difficult to study, this article will focus on the research of location of shear wall structure seismic performance, provide reference for the future of this kind of structure design.


1985 ◽  
Vol 23 (9) ◽  
pp. 46-55
Author(s):  
T. Ishizuka ◽  
K. Maeno ◽  
K. Shirakata ◽  
Y. Furuya

Sign in / Sign up

Export Citation Format

Share Document