Three-dimensional crack tip constraint of shallow cracks in tension and bending

2021 ◽  
Author(s):  
K. H. Leong ◽  
F. Yusof
Keyword(s):  
Three Dimensional ◽  
Crack Tip ◽  
Crack Tip Constraint

Prediction of Failure Behavior for Nuclear Piping Using Curved Wide-Plate Test

2004 ◽  
Vol 126 (4) ◽  
pp. 419-425 ◽  
Author(s):  
Nam-Su Huh ◽  
Yun-Jae Kim ◽  
Jae-Boong Choi ◽  
Young-Jin Kim ◽  
Chang-Ryul Pyo
Keyword(s):  
Fracture Toughness ◽  
Three Dimensional ◽  
Crack Tip ◽  
Full Scale ◽  
Failure Behavior ◽  
Resistance Curve ◽  
Testing Specimen ◽  
Plate Test ◽  
Crack Tip Constraint ◽  
Three Dimensional Finite Element

One important element of the Leak-Before-Break analysis of nuclear piping is how to determine relevant fracture toughness (or the J-resistance curve) for nonlinear fracture mechanics analysis. The practice to use fracture toughness from a standard C(T) specimen is known to often give conservative estimates of toughness. To improve the accuracy of predicting piping failure, this paper proposes a new method to determine fracture toughness using a nonstandard testing specimen, curved wide-plate in tension. To show validity of the proposed curved wide-plate test, the J-resistance curve from the full-scale pipe test is compared with that from the curved wide-plate test and that from C(T) specimen. It is shown that the J-resistance curve from the curved wide-plate tension test is similar to, but that from the C(T) specimen is lower than, the J-resistance curve from the full-scale pipe test. Further validation is performed by investigating crack-tip constraint conditions via detailed three-dimensional finite element analyses, which shows that the crack-tip constraint condition in the curved wide-plate tension specimen is indeed similar to that in the full-scale pipe under bending.

Analysis of 316H Creep Crack Initiation Data at 550℃ using A Crack Tip Constraint Parameter

2021 ◽  
pp. 107746
Author(s):  
Seung-Ho Lee ◽  
Hyun-Woo Jung ◽  
Yun-Jae Kim ◽  
Kamran Nikbin ◽  
Robert A. Ainsworth
Keyword(s):  
Crack Initiation ◽  
Crack Tip ◽  
Creep Crack ◽  
Crack Tip Constraint

Fracture Mechanics of Thin Plates and Shells Under Combined Membrane, Bending, and Twisting Loads

2005 ◽  
Vol 58 (1) ◽  
pp. 37-48 ◽  
Author(s):  
Alan T. Zehnder ◽  
Mark J. Viz
Keyword(s):  
Fracture Mechanics ◽  
Plate Theory ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Crack Tip ◽  
Thin Plates ◽  
Element Analysis ◽  
Crack Tip Fields ◽  
Plates And Shells ◽  
Membrane Bending

The fracture mechanics of plates and shells under membrane, bending, twisting, and shearing loads are reviewed, starting with the crack tip fields for plane stress, Kirchhoff, and Reissner theories. The energy release rate for each of these theories is calculated and is used to determine the relation between the Kirchhoff and Reissner theories for thin plates. For thicker plates, this relationship is explored using three-dimensional finite element analysis. The validity of the application of two-dimensional (plate theory) solutions to actual three-dimensional objects is analyzed and discussed. Crack tip fields in plates undergoing large deflection are analyzed using von Ka´rma´n theory. Solutions for cracked shells are discussed as well. A number of computational methods for determining stress intensity factors in plates and shells are discussed. Applications of these computational approaches to aircraft structures are examined. The relatively few experimental studies of fracture in plates under bending and twisting loads are also reviewed. There are 101 references cited in this article.

Sign in / Sign up

Export Citation Format

Share Document