Accurate modeling and analysis of a typical nonlinear vibration isolator with quasi-zero stiffness

2020 ◽  
Vol 100 (3) ◽  
pp. 2141-2165 ◽  
Author(s):  
Chaoran Liu ◽  
Kaiping Yu
Keyword(s):  
Nonlinear Vibration ◽  
Vibration Isolator ◽  
Modeling And Analysis

Vibration control of an unbalanced system using a quasi-zero stiffness vibration isolator with fluidic actuators and composite material: An experimental study

2022 ◽  
pp. 107754632110514
Author(s):  
Sivakumar Solaiachari ◽  
Jayakumar Lakshmipathy
Keyword(s):  
Composite Material ◽  
Nonlinear Vibration ◽  
Vibration Isolation ◽  
Basalt Fiber ◽  
Experimental Investigations ◽  
Vibration Isolator ◽  
Coil Spring ◽  
Linear Type ◽  
Fluidic Actuators ◽  
Isolation Performance

In this study, a new type of vibration isolator based on fluidic actuators and a composite slab was tested experimentally with an unbalanced disturbance. Quasi-zero stiffness vibration isolation techniques are advanced and provide effective isolation performance for non-nominal loads. The isolation performance of the proposed isolator was compared to that of a nonlinear vibration isolator equipped with fluidic actuators and a mechanical coil spring (NLVIFA). The NLVIFA system is better suited to non-nominal loads; however, the mechanical spring axial deflection leads to limited amplitude reduction in the system. To address this issue, a cross buckled slab was developed to replace a mechanical coil spring for absorbing vertical deflection by transverse bending, which is made of a specially developed composite material of Basalt fiber reinforced with epoxy resin and enhanced with graphene nano pellets. This current study was concerned with the theoretical analysis and experimental investigations of the proposed nonlinear vibration isolator with fluidic actuators and composite material (NLVIFA-CM), which performs under quasi-zero stiffness characteristics. Because of its reduced axial deflection, the theoretical and experimental results show that the NLVIFA-CM system outperforms the NLVIFA system and other linear type vibration isolators in terms of isolation performance. Furthermore, the proposed vibration isolator makes a significant contribution to low-frequency vibration.

Vibration Analysis of Nonlinear Isolator’s Characteristics by ADAMS

2012 ◽  
Vol 152-154 ◽  
pp. 1077-1081 ◽  
Author(s):  
Zhao Qi He ◽  
Yu Chao Song ◽  
Hong Liang Yu
Keyword(s):  
Nonlinear Vibration ◽  
Vibration Isolation ◽  
Excitation Frequency ◽  
Vibration Isolator ◽  
Vibration System ◽  
Linear Vibration ◽  
External Excitation ◽  
Mass Model ◽  
Adams Software ◽  
Isolation Systems

A nonlinear spring-mass model is established to study the dynamic characteristics of nonlinear vibration isolator. By use of ADAMS software, the influence of stiffness, foundation displacement excitation and frequency of external excitation on the nonlinear vibration isolation systems are analyzed. Results indicate that the linear vibration system needs 4s to achieve stability, but the nonlinear vibration system only needs 0.1s. The response value increases with the increase of excitation frequency, the response pick value increases by 61.58% and 102.35% and each corresponding stable value increases by 159.35% and 309.87%.

Study on the improvement of isolation performance of a nonlinear vibration isolator using a post-buckled beam

2016 ◽  
Vol 2016 (0) ◽  
pp. 248
Author(s):  
Takumi SASAKI ◽  
Koji SATA ◽  
Yuichi SUEHIRO ◽  
Takahiro CHIYOJIMA
Keyword(s):  
Nonlinear Vibration ◽  
Vibration Isolator ◽  
Buckled Beam ◽  
Isolation Performance

Nonlinear dynamics analysis of a bi-state nonlinear vibration isolator with symmetric permanent magnets

2019 ◽  
Vol 97 (4) ◽  
pp. 2499-2519 ◽  
Author(s):  
Bo Yan ◽  
Hongye Ma ◽  
Bin Jian ◽  
Ke Wang ◽  
Chuanyu Wu
Keyword(s):  
Nonlinear Dynamics ◽  
Nonlinear Vibration ◽  
Permanent Magnets ◽  
Dynamics Analysis ◽  
Vibration Isolator
Sign in / Sign up

Export Citation Format

Share Document