A BEM investigation on the influence of underground cavities on the seismic response of canyons

2015 ◽  
Vol 11 (2) ◽  
pp. 391-413 ◽  
Author(s):  
Hamid Alielahi ◽  
Mohsen Kamalian ◽  
Mohammad Adampira
2020 ◽  
Vol 14 (03) ◽  
pp. 2050014
Author(s):  
Arash Rostami ◽  
Abdolreza S. Moghadam ◽  
Mahmood Hosseini ◽  
Nima Asghari

The seismic design of the structures is carried out by technical regulations and codes in free-field conditions (regardless of underground cavities). With the availability of tunnels and the complex interaction between the tunnel and the aboveground structures, which may be contemplated wrongly, it could be dangerous for over ground buildings and structures. Consequently, the examination of the underground tunnels and their impact on the land surface and adjacent buildings seismic response seems to be significant. The present research focuses on formation of the plastic hinges in steel structures due to underground cavities and the soil–tunnel–structure interaction of underground structures. First, an existing model was verified by finite element method and the results were compared with a sample specimen. Thus, several effective parameters were considered and studied such as soil type, multi-story structures (4, 8 and 12 stories) and dynamic load type. Then the models were evaluated under real earthquake records. As a result, the seismic response of the structures and plastic conditions of plastic hinge conditions were obtained. The results indicate that the underground cavities have affected the formation of plastic hinges in the structure. They increased the input energy to the structure and had an impact on the total behavior of the structures. Also, the high-rise structures were much more vulnerable to underground tunnels. Therefore, the structures which are located above the underground cavities should be retrofitted and rehabilitated.


2020 ◽  
Vol 15 (1) ◽  
pp. 37-44
Author(s):  
El Mehdi Echebba ◽  
Hasnae Boubel ◽  
Oumnia Elmrabet ◽  
Mohamed Rougui

Abstract In this paper, an evaluation was tried for the impact of structural design on structural response. Several situations are foreseen as the possibilities of changing the distribution of the structural elements (sails, columns, etc.), the width of the structure and the number of floors indicates the adapted type of bracing for a given structure by referring only to its Geometric dimensions. This was done by studying the effect of the technical design of the building on the natural frequency of the structure with the study of the influence of the distribution of the structural elements on the seismic response of the building, taking into account of the requirements of the Moroccan earthquake regulations 2000/2011 and using the ANSYS APDL and Robot Structural Analysis software.


2008 ◽  
Vol 1 (1) ◽  
pp. 37-46
Author(s):  
Satoshi TAMATE ◽  
Yasuo TOYOSAWA ◽  
Seiji TAKANASHI ◽  
Kazuya ITOH ◽  
Naoaki SUEMASA ◽  
...  

1999 ◽  
Vol 5 (9) ◽  
pp. 71-76
Author(s):  
Takao MATSUMURA ◽  
Shinichiro ASANO ◽  
Jun YAMADA ◽  
Masao KOBA ◽  
Koji ITO ◽  
...  

Tuned mass dampers (TMD) are one of the most reliable devices to control the vibration of the structure. The optimum mass ratio required for a single tuned mass damper (STMD) is evaluated corresponding to the fundamental natural frequency of the structure. The effect of STMD and Multiple tuned mass dampers (MTMD) on a G+20 storey structure are studied to demonstrate the damper’s effectiveness in seismic application. The location and number of tuned mass dampers are studied to give best structural performance in maximum reduction of seismic response for El Centro earthquake data. The analysis results from SAP 2000 software tool shows damper weighing 2.5% of the total weight of the structure effectively reduce the response of the structure. Study shows that introduction of 4-MTMD at top storey can effectively reduce the response by 10% more in comparison to single tuned mass damper. The use of MTMD of same mass ratio that of STMD is more effective in seismic response.


Sign in / Sign up

Export Citation Format

Share Document