Alternating Shear Orientation During Cyclic Loading Facilitates Yielding in Amorphous Materials

Amorphous materials are of current interest due to their desirable mechanical, electrical and magnetic properties. Furthermore, crystallizing amorphous alloys provides an avenue for discerning sequential and competitive phases thus allowing access to otherwise inaccessible crystalline structures. Previous studies have shown the benefits of using AEM to determine crystal structures and compositions of partially crystallized alloys. The present paper will discuss the AEM characterization of crystallized Cu-Ti and Ni-Ti amorphous films.Cu60Ti40: The amorphous alloy Cu60Ti40, when continuously heated, forms a simple intermediate, macrocrystalline phase which then transforms to the ordered, equilibrium Cu3Ti2 phase. However, contrary to what one would expect from kinetic considerations, isothermal annealing below the isochronal crystallization temperature results in direct nucleation and growth of Cu3Ti2 from the amorphous matrix.

Download Full-text

TEM studies of amorphization processes and amorphous structures

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100104303 ◽

1988 ◽

Vol 46 ◽

pp. 448-449

Author(s):

T. E. Mitchell ◽

R. B. Schwarz

Keyword(s):

Amorphous Materials ◽

Fission Products ◽

Rapid Quenching ◽

Surface Films ◽

List Type ◽

Oxide Glasses ◽

Crystalline Materials ◽

Amorphous Structures ◽

Amorphous Surface ◽

Interfacial Films

Traditional oxide glasses occur naturally as obsidian and can be made easily by suitable cooling histories. In the past 30 years, a variety of techniques have been discovered which amorphize normally crystalline materials such as metals. These include [1-3]:Rapid quenching from the vapor phase.Rapid quenching from the liquid phase.Electrodeposition of certain alloys, e.g. Fe-P.Oxidation of crystals to produce amorphous surface oxide layers.Interdiffusion of two pure crystalline metals.Hydrogen-induced vitrification of an intermetal1ic.Mechanical alloying and ball-milling of intermetal lie compounds.Irradiation processes of all kinds using ions, electrons, neutrons, and fission products.We offer here some general comments on the use of TEM to study these materials and give some particular examples of such studies.Thin specimens can be prepared from bulk homogeneous materials in the usual way. Most often, however, amorphous materials are in the form of surface films or interfacial films with different chemistry from the substrates.

Download Full-text

Analysis of Dark-Field Images of Disordered Materials

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100096059 ◽

1972 ◽

Vol 30 ◽

pp. 560-561

Author(s):

J. M. Cowley

Keyword(s):

Amorphous Materials ◽

Careful Analysis ◽

Dark Field ◽

Minimum Diameter ◽

Statistical Fluctuations ◽

Bright Spots ◽

Sufficient Detail ◽

Random Arrangement ◽

Diffraction Patterns ◽

Imaging Conditions

Recently a number of authors have reported detail in dark-field images obtained from diffuse-scattering regions of electron diffraction patterns. Bright spots in images from short-range order diffuse peaks of disordered binary alloys have been interpreted as evidence for the existence of microdomains of ordered lattice or of segragated clusters of one component. Spotty contrast in dark field images of near-amorphous materials has been interpreted as evidence for the existense of microcrystals. Without a careful analysis of the imaging conditions such conclusions may be invalid. Usually the conditions of the experiment have not been specified in sufficient detail to allow evaluation of the conclusions.Elementary considerations show that even for a completely random arrangement of atoms the statistical fluctuations of density will give a spotty contrast with spots of minimum diameter determined by the dark field aperture size and other factors influencing the minimum resolvable distance under darkfield imaging conditions, including fluctuations and drift over long exposure times (resolution usually 10Å or more).

Download Full-text

Simulations of high-resolution images of amorphous silicon films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010014419x ◽

1986 ◽

Vol 44 ◽

pp. 544-545

Author(s):

G. Y. Fan ◽

J. M. Cowley

Keyword(s):

Electron Microscope ◽

High Frequency ◽

Fourier Transformation ◽

Amorphous Materials ◽

Low Frequency ◽

Chromatic Aberration ◽

Structure Information ◽

Frequency Components ◽

High Resolution Images ◽

Spatial Frequency Spectrum

It is well known that the structure information on the specimen is not always faithfully transferred through the electron microscope. Firstly, the spatial frequency spectrum is modulated by the transfer function (TF) at the focal plane. Secondly, the spectrum suffers high frequency cut-off by the aperture (or effectively damping terms such as chromatic aberration). While these do not have essential effect on imaging crystal periodicity as long as the low order Bragg spots are inside the aperture, although the contrast may be reversed, they may change the appearance of images of amorphous materials completely. Because the spectrum of amorphous materials is continuous, modulation of it emphasizes some components while weakening others. Especially the cut-off of high frequency components, which contribute to amorphous image just as strongly as low frequency components can have a fundamental effect. This can be illustrated through computer simulation. Imaging of a whitenoise object with an electron microscope without TF limitation gives Fig. 1a, which is obtained by Fourier transformation of a constant amplitude combined with random phases generated by computer.

Download Full-text

Multislice calculations for quasi-periodic and non-periodic objects

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100173820 ◽

1990 ◽

Vol 48 (4) ◽

pp. 138-139

Author(s):

R. Herrera ◽

A. Gómez

Keyword(s):

Electron Diffraction ◽

Computer Simulations ◽

Periodic Table ◽

Amorphous Materials ◽

Space Group ◽

Essential Step ◽

Shape Effects ◽

Atomic Scattering ◽

Diffraction Patterns ◽

Periodic Continuation

Computer simulations of electron diffraction patterns and images are an essential step in the process of structure and/or defect elucidation. So far most programs are designed to deal specifically with crystals, requiring frequently the space group as imput parameter. In such programs the deviations from perfect periodicity are dealt with by means of “periodic continuation”.However, for many applications involving amorphous materials, quasiperiodic materials or simply crystals with defects (including finite shape effects) it is convenient to have an algorithm capable of handling non-periodicity. Our program “HeGo” is an implementation of the well known multislice equations in which no periodicity assumption is made whatsoever. The salient features of our implementation are: 1) We made Gaussian fits to the atomic scattering factors for electrons covering the whole periodic table and the ranges [0-2]Å−1 and [2-6]Å−1.

Download Full-text

Comparative study of the effective parameters on residual stress relaxation in welded aluminum plates under cyclic loading

Mechanics & Industry ◽

10.1051/meca/2020061 ◽

2020 ◽

Vol 21 (5) ◽

pp. 505

Author(s):

Yousef Ghaderi Dehkordi ◽

Ali Pourkamali Anaraki ◽

Amir Reza Shahani

Keyword(s):

Residual Stress ◽

Cyclic Loading ◽

Stress Relaxation ◽

Stress Amplitude ◽

Cyclic Plasticity ◽

Mean Stress ◽

Effective Parameters ◽

Perfect Plasticity ◽

Residual Stress Relaxation ◽

Aluminum Plates

The prediction of residual stress relaxation is essential to assess the safety of welded components. This paper aims to study the influence of various effective parameters on residual stress relaxation under cyclic loading. In this regard, a 3D finite element modeling is performed to determine the residual stress in welded aluminum plates. The accuracy of this analysis is verified through experiment. To study the plasticity effect on stress relaxation, two plasticity models are implemented: perfect plasticity and combined isotropic-kinematic hardening. Hence, cyclic plasticity characterization of the material is specified by low cycle fatigue tests. It is found that the perfect plasticity leads to greater stress relaxation. In order to propose an accurate model to compute the residual stress relaxation, the Taguchi L18 array with four 3-level factors and one 6-level is employed. Using statistical analysis, the order of factors based on their effect on stress relaxation is determined as mean stress, stress amplitude, initial residual stress, and number of cycles. In addition, the stress relaxation increases with an increase in mean stress and stress amplitude.

Download Full-text