Predictive Model of the Percentage of Copper in the Matte of the Teniente Converter Through an Artificial Neural Network

JOM ◽  
2022 ◽  
Author(s):  
Vladimir Riffo ◽  
Alejandro Pulgar
2018 ◽  
Vol 204 ◽  
pp. 02018
Author(s):  
Aisyah Larasati ◽  
Anik Dwiastutik ◽  
Darin Ramadhanti ◽  
Aal Mahardika

This study aims to explore the effect of kurtosis level of the data in the output layer on the accuracy of artificial neural network predictive models. The artificial neural network predictive models are comprised of one node in the output layer and six nodes in the input layer. The number of hidden layer is automatically built by the program. Data are generated using simulation approach. The results show that the kurtosis level of the node in the output layer is significantly affect the accuracy of the artificial neural network predictive model. Platycurtic and leptocurtic data has significantly higher misclassification rates than mesocurtic data. However, the misclassification rates between platycurtic and leptocurtic is not significantly different. Thus, data distribution with kurtosis nearly to zero results in a better ANN predictive model.


2019 ◽  
Vol 116 ◽  
pp. 69-81 ◽  
Author(s):  
Amir Ahmad Hedayat ◽  
Ehsan Ahmadi Afzadi ◽  
Hossein Kalantaripour ◽  
Esmaeil Morshedi ◽  
Amin Iranpour

2020 ◽  
Vol 12 (10) ◽  
pp. 4001
Author(s):  
Sung-Sik Park ◽  
Peter D. Ogunjinmi ◽  
Seung-Wook Woo ◽  
Dong-Eun Lee

Conventionally, liquefaction-induced settlements have been predicted through numerical or analytical methods. In this study, a machine learning approach for predicting the liquefaction-induced settlement at Pohang was investigated. In particular, we examined the potential of an artificial neural network (ANN) algorithm to predict the earthquake-induced settlement at Pohang on the basis of standard penetration test (SPT) data. The performance of two ANN models for settlement prediction was studied and compared in terms of the R2 correlation. Model 1 (input parameters: unit weight, corrected SPT blow count, and cyclic stress ratio (CSR)) showed higher prediction accuracy than model 2 (input parameters: depth of the soil layer, corrected SPT blow count, and the CSR), and the difference in the R2 correlation between the models was about 0.12. Subsequently, an optimal ANN model was used to develop a simple predictive model equation, which was implemented using a matrix formulation. Finally, the liquefaction-induced settlement chart based on the predictive model equation was proposed, and the applicability of the chart was verified by comparing it with the interferometric synthetic aperture radar (InSAR) image.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Chen-Chih Chung ◽  
Lung Chan ◽  
Oluwaseun Adebayo Bamodu ◽  
Chien-Tai Hong ◽  
Hung-Wen Chiu

AbstractDespite the salient benefits of the intravenous tissue plasminogen activator (tPA), symptomatic intracerebral hemorrhage (sICH) remains a frequent complication and constitutes a major concern when treating acute ischemic stroke (AIS). This study explored the use of artificial neural network (ANN)-based models to predict sICH and 3-month mortality for patients with AIS receiving tPA. We developed ANN models based on evaluation of the predictive value of pre-treatment parameters associated with sICH and mortality in a cohort of 331 patients between 2009 and 2018. The ANN models were generated using eight clinical inputs and two outputs. The generalizability of the model was validated using fivefold cross-validation. The performance of each model was assessed according to the accuracy, precision, sensitivity, specificity, and area under the receiver operating characteristic curve (AUC). After adequate training, the ANN predictive model AUC for sICH was 0.941, with accuracy, sensitivity, and specificity of 91.0%, 85.7%, and 92.5%, respectively. The predictive model AUC for 3-month mortality was 0.976, with accuracy, sensitivity, and specificity of 95.2%, 94.4%, and 95.5%, respectively. The generated ANN-based models exhibited high predictive performance and reliability for predicting sICH and 3-month mortality after thrombolysis; thus, its clinical application to assist decision-making when administering tPA is envisaged.


2020 ◽  
Vol 6 (2) ◽  
pp. 715-729 ◽  
Author(s):  
Zahra Mosaffaei ◽  
Ali Jahani ◽  
Mohammad Ali Zare Chahouki ◽  
Hamid Goshtasb ◽  
Vahid Etemad ◽  
...  

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Mehdi Moghri ◽  
Milos Madic ◽  
Mostafa Omidi ◽  
Masoud Farahnakian

During the past decade, polymer nanocomposites attracted considerable investment in research and development worldwide. One of the key factors that affect the quality of polymer nanocomposite products in machining is surface roughness. To obtain high quality products and reduce machining costs it is very important to determine the optimal machining conditions so as to achieve enhanced machining performance. The objective of this paper is to develop a predictive model using a combined design of experiments and artificial intelligence approach for optimization of surface roughness in milling of polyamide-6 (PA-6) nanocomposites. A surface roughness predictive model was developed in terms of milling parameters (spindle speed and feed rate) and nanoclay (NC) content using artificial neural network (ANN). As the present study deals with relatively small number of data obtained from full factorial design, application of genetic algorithm (GA) for ANN training is thought to be an appropriate approach for the purpose of developing accurate and robust ANN model. In the optimization phase, a GA is considered in conjunction with the explicit nonlinear function derived from the ANN to determine the optimal milling parameters for minimization of surface roughness for each PA-6 nanocomposite.


2015 ◽  
Vol 19 (1) ◽  
pp. 85-93 ◽  
Author(s):  
Ehsan Momeni ◽  
Ramli Nazir ◽  
Danial Jahed Armaghani ◽  
Harnedi Maizir

<p class="MsoNormal" style="text-align: justify; line-height: 200%;">Axial bearing capacity (ABC) of piles is usually determined by static load test (SLT). However, conducting SLT is costly and time-consuming. High strain dynamic pile testing (HSDPT) which is provided by pile driving analyzer (PDA) is a more recent approach for predicting the ABC of piles. In comparison to SLT, PDA test is quick and economical. Implementing feed forward back-propagation artificial neural network (ANN) for solving geotechnical problems has recently gained attention mainly due to its ability in finding complex nonlinear relationships among different parameters. In this study, an ANN-based predictive model for estimating ABC of piles and its distribution is proposed. For network construction purpose, 36 PDA tests were performed on various concrete piles in different project sites. The PDA results, pile geometrical characteristics as well as soil investigation data were used for training the ANN models. Findings indicate the feasibility of ANN in predicting ultimate, shaft and tip bearing resistances of piles. The coefficients of determination, R², equal to 0.941, 0.936, and 0.951 for testing data reveal that the shaft, tip and ultimate bearing capacities of piles predicted by ANN-based model are in close agreement with those of HSDPT. By using sensitivity analysis, it was found that the length and area of the piles are dominant factors in the proposed predictive model.</p><p class="MsoNormal" style="text-align: justify; line-height: 200%;"> </p><p class="MsoNormal" style="text-align: justify; line-height: 200%;"><strong>Resumen</strong></p><p class="MsoNormal" style="text-align: justify; line-height: 200%;">La Capacidad Axial de Soporte (ABC, en inglés) de un pilote de construcción se determina usualmente a través de una Prueba de Carga Estática (SLT, inglés). Sin embargo, estas pruebas son costosas y demandan tiempo. La evaluación de las Dinámicas de Alto Esfuerzo de Pilotes (HSDPT, inglés), que la provee el programa de Análisis de Excavación (PDA, inglés), es una forma de aproximación más reciente para preveer la Capacidad Axial de Soporte. En comparación con la Prueba de Cargas Estática, la evaluación PDA es rápida y económica. La implementación de Redes Neuronales Arficiales (ANN, en inglés) que permita resolver problemas geotécnicos ha ganado atención recientemente debido a su posibilidad de hallar relaciones no lineales entre los diferentes parámetros. En este estudio se propone un modelo predictivo ANN para estimar la Capacidad Axial de Soporte de pilotes y su distribución. Para fines de una red de construcción se realizaron 36 pruebas PDA en pilotes de diferentes proyectos. Los resultados de los Análisis de Excavación, las características geométricas de los pilotes, al igual que los datos de investigación del suelo se utilizaron para probar los modelos ANN. Los resultados indican la viabilidad del modelo ANN en predecir la resistencia de los pilotes. Los coeficientes de correlación, R², que alcanzaron 0.941, 09.36 y 0.951 para la evaluación de los datos, revelan que la capacidad del pilotaje en el último rodamiento, en el cojinete del eje y en la punta que se predijeron con el modelo ANN concuerda con las establecidas a través del HSDPT. A través del análisis de respuesta se determinó que la longitud y el área de los pilotes son factores dominantes en el modelo predictivo propuesto.</p>


Sign in / Sign up

Export Citation Format

Share Document