scholarly journals A Simple and Sustainable Prediction Method of Liquefaction-Induced Settlement at Pohang Using an Artificial Neural Network

2020 ◽  
Vol 12 (10) ◽  
pp. 4001
Author(s):  
Sung-Sik Park ◽  
Peter D. Ogunjinmi ◽  
Seung-Wook Woo ◽  
Dong-Eun Lee
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Predictive Model ◽  
Model Equation ◽  
Soil Layer ◽  
Unit Weight ◽  
Ann Model ◽  
Matrix Formulation ◽  
Input Parameters ◽  
Artificial Neural

Conventionally, liquefaction-induced settlements have been predicted through numerical or analytical methods. In this study, a machine learning approach for predicting the liquefaction-induced settlement at Pohang was investigated. In particular, we examined the potential of an artificial neural network (ANN) algorithm to predict the earthquake-induced settlement at Pohang on the basis of standard penetration test (SPT) data. The performance of two ANN models for settlement prediction was studied and compared in terms of the R2 correlation. Model 1 (input parameters: unit weight, corrected SPT blow count, and cyclic stress ratio (CSR)) showed higher prediction accuracy than model 2 (input parameters: depth of the soil layer, corrected SPT blow count, and the CSR), and the difference in the R2 correlation between the models was about 0.12. Subsequently, an optimal ANN model was used to develop a simple predictive model equation, which was implemented using a matrix formulation. Finally, the liquefaction-induced settlement chart based on the predictive model equation was proposed, and the applicability of the chart was verified by comparing it with the interferometric synthetic aperture radar (InSAR) image.

Predicting the effective thermal conductivity of unfrozen soils with various water contents based on artificial neural network

2021 ◽  
Author(s):  
Chuan-Yong Zhu ◽  
Zhi-Yang He ◽  
Mu Du ◽  
Liang Gong ◽  
Xinyu Wang
Keyword(s):  
Neural Network ◽  
Thermal Conductivity ◽  
Artificial Neural Network ◽  
Water Content ◽  
Effective Thermal Conductivity ◽  
Pearson Correlation ◽  
Complex Structure ◽  
Ann Model ◽  
Input Parameters ◽  
Artificial Neural

Abstract The effective thermal conductivity of soils is a crucial parameter for many applications such as geothermal engineering, environmental science, and agriculture and engineering. However, it is pretty challenging to accurately determine it due to soils’ complex structure and components. In the present study, the influences of different parameters, including silt content (m si), sand content (m sa), clay content (m cl), quartz content (m qu), porosity, and water content on the effective thermal conductivity of soils, were firstly analyzed by the Pearson correlation coefficient. Then different artificial neural network (ANN) models were developed based on the 465 groups of thermal conductivity of unfrozen soils collected from the literature to predict the effective thermal conductivity of soils. Results reveal that the parameters of m si, m sa, m cl, and m qu have a relatively slight influence on the effective thermal conductivity of soils compared to the water content and porosity. Although the ANN model with six parameters has the highest accuracy, the ANN model with two input parameters (porosity and water content) could predict the effective thermal conductivity well with acceptable accuracy and R 2=0.940. Finally, a correlation of the effective thermal conductivity for different soils was proposed based on the large number of results predicted by the two input parameters ANN-based model. This correlation has proved to have a higher accuracy without assumptions and uncertain parameters when compared to several commonly used existing models.

An Artificial Neural Network Approach for Prediction of Bearing Capacity of Spread Foundations in Sand

2015 ◽  
Vol 72 (3) ◽  
Author(s):  
Ramli Nazir ◽  
Ehsan Momeni ◽  
Kadir Marsono ◽  
Harnedi Maizir
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Bearing Capacity ◽  
Predictive Model ◽  
Linear Regression Analysis ◽  
Load Test ◽  
Coefficient Of Determination ◽  
Ann Model ◽  
Cohesionless Soils ◽  
Artificial Neural

This study highlights the application of Back-Propagation (BP) feed forward Artificial Neural Network (ANN) as a tool for predicting bearing capacity of spread foundations in cohesionless soils. For network construction, a database of 75 recorded cases of full-scale axial compression load test on spread foundations in cohesionless soils was compiled from literatures. The database presents information about footing length (L), footing width (B), embedded depth of the footing (Df), average vertical effective stress of the soil at B/2 below footing (s΄), friction angle of the soil (f) and the ultimate axial bearing capacity (Qu). The last parameter was set as the desired output in the ANN model, while the rest were used as input of the ANN predictive model of bearing capacity. The prediction performance of ANN model was compared to that of Multi-Linear Regression analysis. Findings show that the proposed ANN model is a suitable tool for predicting bearing capacity of spread foundations. Coefficient of determination R2 equals to 0.98, strongly indicates that the ANN model exhibits a high degree of accuracy in predicting the axial bearing capacity of spread foundation. Using sensitivity analysis, it is concluded that the geometrical properties of the spread foundations (B and L) are the most influential parameters in the proposed predictive model of Qu.

Predicting the Workability of Self-Compacting Concrete Using Artificial Neural Network

2010 ◽  
Vol 168-170 ◽  
pp. 1730-1734
Author(s):  
Fang Xian Li ◽  
Qi Jun Yu ◽  
Jiang Xiong Wei ◽  
Jian Xin Li
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Ann Model ◽  
Self Compacting Concrete ◽  
Data Set ◽  
Slump Flow ◽  
Super Plasticizer ◽  
Input Parameters ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

An artificial neural network (ANN) is presented to predict the workability of self compacting concrete (SCC) containing slump, slump flow and V-test. A data set of a laboratory work, in which a total of 23 concretes were produced, was utilized in the ANNs study. ANN model is constructed, trained and tested using these data. The data used in the ANN model are arranged in a format of six input parameters that cover the cement, fly ash, blast furnace slag, super plasticizer, sand ratio and water/binder, three output parameters which are slump, slump flow and V-test of SCC. ANN-1, ANN-2 and ANN-3 models which containing 15 ,11 and 5 neurons in the hidden layers, respectively are found to predict workability of concrete well within the ranges of the input parameters considered. The three models are tested by comparing to the results to actual measured data. The results showed that ANN-2 is the best suitable for predicting the workability of SCC using concrete ingredients as input parameters.

scholarly journals Seismotectonics Considered Artificial Neural Network Earthquake Prediction in Northeast Seismic Region of China

2015 ◽  
Vol 9 (1) ◽  
pp. 522-528 ◽  
Author(s):  
Jian Sheng ◽  
Dongmei Mu ◽  
Hongyan Zhang ◽  
Han Lv
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Earthquake Prediction ◽  
Research Area ◽  
Ann Model ◽  
Time Duration ◽  
Seismic Region ◽  
Prediction Time ◽  
Input Parameters ◽  
Artificial Neural

It is well known that earthquakes are a regional event, strongly controlled by local geological structures and circumstances. Reducing the research area can reduce the influence of other irrelevant seismotectonics. A new sub regiondividing scheme, considering the seismotectonics influence, was applied for the artificial neural network (ANN) earthquake prediction model in the northeast seismic region of China (NSRC). The improved set of input parameters and prediction time duration are also discussed in this work. The new dividing scheme improved the prediction accuracy for different prediction time frames. Three different research regions were analyzed as an earthquake data source for the ANN model under different prediction time duration frames. The results show: (1) dividing the research region into smaller subregions can improve the prediction accuracies in NSRC, (2) larger research regions need shorter prediction durations to obtain better performance, (3) different areas have different sets of input parameters in NSRC, and (4) the dividing scheme, considering the seismotectonics frame of the region, yields better results.

Artificial Neural Network Prediction Model of Dust Effect on Photovoltaic Performance for Residential applications: Malaysia Case Study

2021 ◽  
Vol 11 (2) ◽  
pp. 365-373
Author(s):  
Emy Zairah Ahmad ◽  
Hasila Jarimi ◽  
Tajul Rosli Razak
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Prediction Model ◽  
Predictive Model ◽  
Operating Conditions ◽  
Ann Model ◽  
Pv System ◽  
Pv Module ◽  
Artificial Neural ◽  
Dust Accumulation

Dust accumulation on the photovoltaic system adversely degrades its power conversion efficiency (PCE). Focusing on residential installations, dust accumulation on PV modules installed in tropical regions may be vulnerable due to lower inclination angles and rainfall that encourage dust settlement on PV surfaces. However, most related studies in the tropics are concerned with studies in the laboratory, where dust collection is not from the actual field, and an accurate performance prediction model is impossible to obtain. This paper investigates the dust-related degradation in the PV output performance based on the developed Artificial Neural Network (ANN) predictive model. For this purpose, two identical monocrystalline modules of 120 Wp were tested and assessed under real operating conditions in Melaka, Malaysia (2.1896° N, 102.2501° E), of which one module was dust-free (clean). At the same time, the other was left uncleaned (dusty) for one month. The experimental datasets were divided into three sets: the first set was used for training and testing purposes, while the second and third, namely Data 2 and Data 3, were used for validating the proposed ANN model. The accuracy study shows that the predicted data using the ANN model and the experimentally acquired data are in good agreement, with MAE and RMSE for the cleaned PV module are as low as 1.28 °C, and 1.96 °C respectively for Data 2 and 3.93 °C and 4.92 °C respectively for Data 3.  Meanwhile, the RMSE and MAE for the dusty PV module are 1.53°C and 2.82 °C respectively for Data 2 and 4.13 °C and 5.26 °C for Data 3. The ANN predictive model was then used for yield forecasting in a residential installation and found that the clean PV system provides a 7.29 % higher yield than a dusty system. The proposed ANN model is beneficial for PV system installers to assess and anticipate the impacts of dust on the PV installation in cities with similar climatic conditions.

Temperature Rise Prediction of Oil-Air Lubricated Angular Contact Ball Bearings Using Artificial Neural Network

2019 ◽  
Vol 12 (3) ◽  
pp. 248-261
Author(s):  
Baomin Wang ◽  
Xiao Chang
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Temperature Rise ◽  
High Speed ◽  
Ball Bearing ◽  
Influence Factors ◽  
Ball Bearings ◽  
Ann Model ◽  
Angular Contact Ball Bearing ◽  
Artificial Neural

Background: Angular contact ball bearing is an important component of many high-speed rotating mechanical systems. Oil-air lubrication makes it possible for angular contact ball bearing to operate at high speed. So the lubrication state of angular contact ball bearing directly affects the performance of the mechanical systems. However, as bearing rotation speed increases, the temperature rise is still the dominant limiting factor for improving the performance and service life of angular contact ball bearings. Therefore, it is very necessary to predict the temperature rise of angular contact ball bearings lubricated with oil-air. Objective: The purpose of this study is to provide an overview of temperature calculation of bearing from many studies and patents, and propose a new prediction method for temperature rise of angular contact ball bearing. Methods: Based on the artificial neural network and genetic algorithm, a new prediction methodology for bearings temperature rise was proposed which capitalizes on the notion that the temperature rise of oil-air lubricated angular contact ball bearing is generally coupling. The influence factors of temperature rise in high-speed angular contact ball bearings were analyzed through grey relational analysis, and the key influence factors are determined. Combined with Genetic Algorithm (GA), the Artificial Neural Network (ANN) model based on these key influence factors was built up, two groups of experimental data were used to train and validate the ANN model. Results: Compared with the ANN model, the ANN-GA model has shorter training time, higher accuracy and better stability, the output of ANN-GA model shows a good agreement with the experimental data, above 92% of bearing temperature rise under varying conditions can be predicted using the ANNGA model. Conclusion: A new method was proposed to predict the temperature rise of oil-air lubricated angular contact ball bearings based on the artificial neural network and genetic algorithm. The results show that the prediction model has good accuracy, stability and robustness.

scholarly journals Artificial neural network, predictor variables and sensitivity threshold for DNA methylation-based age prediction using blood samples

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhonghui Thong ◽  
Jolena Ying Ying Tan ◽  
Eileen Shuzhen Loo ◽  
Yu Wei Phua ◽  
Xavier Liang Shun Chan ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Regression Model ◽  
Sensitivity Threshold ◽  
Ann Model ◽  
Blood Samples ◽  
Ann Models ◽  
Artificial Neural ◽  
The Impact ◽  
Age Prediction

AbstractRegression models are often used to predict age of an individual based on methylation patterns. Artificial neural network (ANN) however was recently shown to be more accurate for age prediction. Additionally, the impact of ethnicity and sex on our previous regression model have not been studied. Furthermore, there is currently no age prediction study investigating the lower limit of input DNA at the bisulfite treatment stage prior to pyrosequencing. Herein, we evaluated both regression and ANN models, and the impact of ethnicity and sex on age prediction for 333 local blood samples using three loci on the pyrosequencing platform. Subsequently, we trained a one locus-based ANN model to reduce the amount of DNA used. We demonstrated that the ANN model has a higher accuracy of age prediction than the regression model. Additionally, we showed that ethnicity did not affect age prediction among local Chinese, Malays and Indians. Although the predicted age of males were marginally overestimated, sex did not impact the accuracy of age prediction. Lastly, we present a one locus, dual CpG model using 25 ng of input DNA that is sufficient for forensic age prediction. In conclusion, the two ANN models validated would be useful for age prediction to provide forensic intelligence leads.

scholarly journals Estimation of the Hot Swap Circulation Current of a Multiple Parallel Lithium Battery System with an Artificial Neural Network Model

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1448
Author(s):  
Nam-Gyu Lim ◽  
Jae-Yeol Kim ◽  
Seongjun Lee
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Lithium Battery ◽  
Battery Pack ◽  
Battery Management ◽  
Ann Model ◽  
Battery System ◽  
Load Current ◽  
Circulating Current ◽  
Artificial Neural

Battery applications, such as electric vehicles, electric propulsion ships, and energy storage systems, are developing rapidly, and battery management issues are gaining attention. In this application field, a battery system with a high capacity and high power in which numerous battery cells are connected in series and parallel is used. Therefore, research on a battery management system (BMS) to which various algorithms are applied for efficient use and safe operation of batteries is being conducted. In general, maintenance/replacement of multi-series/multiple parallel battery systems is only possible when there is no load current, or the entire system is shut down. However, if the circulating current generated by the voltage difference between the newly added battery and the existing battery pack is less than the allowable current of the system, the new battery can be connected while the system is running, which is called hot swapping. The circulating current generated during the hot-swap operation is determined by the battery’s state of charge (SOC), the parallel configuration of the battery system, temperature, aging, operating point, and differences in the load current. Therefore, since there is a limit to formulating a circulating current that changes in size according to these various conditions, this paper presents a circulating current estimation method, using an artificial neural network (ANN). The ANN model for estimating the hot-swap circulating current is designed for a 1S4P lithium battery pack system, consisting of one series and four parallel cells. The circulating current of the ANN model proposed in this paper is experimentally verified to be able to estimate the actual value within a 6% error range.

Modeling of lime production process using artificial neural network

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Abolghasem Daeichian ◽  
Rana Shahramfar ◽  
Elham Heidari
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Production Process ◽  
High Energy ◽  
Ann Model ◽  
Artificial Neural ◽  
Rotary Kilns ◽  
Input Variables ◽  
Artificial Neural Network Ann ◽  
Lime Production

Abstract Lime is a significant material in many industrial processes, including steelmaking by blast furnace. Lime production through rotary kilns is a standard method in industries, yet it has depreciation, high energy consumption, and environmental pollution. A model of the lime production process can help to not only increase our knowledge and awareness but also can help reduce its disadvantages. This paper presents a black-box model by Artificial Neural Network (ANN) for the lime production process considering pre-heater, rotary kiln, and cooler parameters. To this end, actual data are collected from Zobahan Isfahan Steel Company, Iran, which consists of 746 data obtained in a duration of one year. The proposed model considers 23 input variables, predicting the amount of produced lime as an output variable. The ANN parameters such as number of hidden layers, number of neurons in each layer, activation functions, and training algorithm are optimized. Then, the sensitivity of the optimum model to the input variables is investigated. Top-three input variables are selected on the basis of one-group sensitivity analysis and their interactions are studied. Finally, an ANN model is developed considering the top-three most effective input variables. The mean square error of the proposed models with 23 and 3 inputs are equal to 0.000693 and 0.004061, respectively, which shows a high prediction capability of the two proposed models.

Sign in / Sign up

Export Citation Format

Share Document