Effect of Using High Damping Rubber Bearings for Seismic Isolation of the Buildings

2021 ◽  
Author(s):  
Ahmet Hilmi Deringöl ◽  
Esra Mete Güneyisi
Keyword(s):  
Seismic Isolation ◽  
High Damping Rubber Bearings ◽  
High Damping Rubber ◽  
Rubber Bearings

Hysteretic Restoring Force Characteristics of High Damping Rubber Bearings Under High Compressive Stress

2004 ◽  
Author(s):  
Yasuhiro Kasahara ◽  
Shigenobu Suzuki ◽  
Takashi Kikuchi
Keyword(s):  
Compressive Stress ◽  
Seismic Isolation ◽  
Damping Ratio ◽  
Loading Test ◽  
Restoring Force ◽  
Scaled Model ◽  
High Damping Rubber Bearings ◽  
High Damping Rubber ◽  
Rubber Bearings ◽  
Force Characteristics

Hysteretic restoring force characteristics — shear stiffness, equivalent damping ratio, and ultimate properties — of seismic isolation bearings are significantly affected by compressive stress. In this study, dependence of shear properties of high-damping rubber bearings (HDR) on the compressive stress σ and secondary shape factor S2 was studied by dynamic loading test with scaled-model and static loading test with full-scale isolators. The results highlighted the high compressive stress dependency on restoring force characteristics of HDR with the isolator of relatively small S2. It is concluded that large S2 is desired when isolators are designed for high compressive stress. The applicability of HDR under high compressive stress was experimentally verified.

scholarly journals Responses of Building Base Isolated With High Damping Rubber Bearings

2019 ◽  
Vol 8 (9) ◽  
pp. 1287-1292
Keyword(s):  
Seismic Isolation ◽  
Design Procedure ◽  
Hysteretic Model ◽  
Base Shear ◽  
Ground Acceleration ◽  
Element Analysis ◽  
High Damping Rubber Bearings ◽  
Fixed Base ◽  
High Damping Rubber ◽  
Rubber Bearings

Seismic isolation is one of the most efficient techniques to protect structures against earthquakes. Rubber bearings are suitable for low-rise and medium-rise buildings due to its durability and easy fabrication. This paper presents the hori-zontal response of a six-storey base-isolated building using high damping rubber bearings (HDRB) under two ground motions of earthquakes as types I and II in JRA (2002) by finite element analysis. In this analysis, these bearings are mod-elled by the bilinear hysteretic model which is indicated in JRA and AASHTO. Comparison of horizontal response including base shear force and roof level acceleration between the two cases: base-isolated building and fixed-base building is carried out to evaluate the effectiveness of the use of HDRB on the protection of buildings from earthquakes. The numerical results show that the peak value of roof floor acceleration of the fixed-base building is two times higher than that of the base-isolated building, and the floor accelerations depend on the peak values of ground acceleration. In addition, the step-by-step design procedure for deter-mining the size of HDRBs used for buildings is also presented in this paper.

Non-Linear Behaviour of Base-Isolated Building Supported on Flexible Soil under Damaging Earthquakes

2011 ◽  
Vol 488-489 ◽  
pp. 142-145
Author(s):  
Sayed Mahmoud ◽  
Per Erik Austrell ◽  
Robert Jankowski
Keyword(s):  
Structural Damage ◽  
Seismic Isolation ◽  
Soft Soil ◽  
High Damping Rubber Bearings ◽  
Non Linear ◽  
Linear Behaviour ◽  
Soil Flexibility ◽  
High Damping Rubber ◽  
Isolation Systems ◽  
Rubber Bearings

Seismic isolation is a strategy to reduce damage of structures exposed to devastating earthquake excitations. Isolation systems, applied at the base of buildings, lower the fundamental frequency of the structure below the range of dominant frequencies of the ground motion as well as allow to dissipate more energy during structural vibrations. The effectiveness of the base-isolated buildings in damage reduction has been confirmed numerically for the models of structures with fixed supports. The aim of the present paper is to show the results of the non-linear analysis of the response of a base-isolated building supported on soft soil incorporating soil-structure interaction. The detailed study has been conducted for the building equipped with high damping rubber bearings used as isolation devices. The results of numerical simulations demonstrate that soil flexibility has a significant influence on the behaviour of isolated base of the structure. Considering the flexibility of soil significantly affects the rigid superstructure response lowering its potential to reduce structural damage.

Sign in / Sign up

Export Citation Format

Share Document