scholarly journals Explicit meshfree $${{\varvec{u}}}-{{\varvec{p}}}_\mathbf{\mathrm{w}}$$ solution of the dynamic Biot formulation at large strain

Author(s):  
Pedro Navas ◽  
Miguel Molinos ◽  
Miguel M. Stickle ◽  
Diego Manzanal ◽  
Angel Yagüe ◽  
...  

AbstractIn this paper, an efficient and robust methodology to simulate saturated soils subjected to low-medium frequency dynamic loadings under large deformation regime is presented. The coupling between solid and fluid phases is solved through the dynamic reduced formulation $$u-p_\mathrm{w}$$ u - p w (solid displacement – pore water pressure) of the Biot’s equations. The additional novelty lies in the employment of an explicit two-steps Newmark predictor-corrector time integration scheme that enables accurate solutions of related geomechanical problems at large strain without the usually high computational cost associated with the implicit counterparts. Shape functions based on the elegant Local Maximum Entropy approach, through the Optimal Transportation Meshfree framework, are considered to solve numerically different dynamic problems in fluid saturated porous media.

2014 ◽  
Vol 11 (05) ◽  
pp. 1350104 ◽  
Author(s):  
SACHIN S. GAUTAM ◽  
ROGER A. SAUER

Simulation of dynamic adhesive peeling problems at small scales has attracted little attention so far. These problems are characterized by a highly nonlinear response. Accurate and stable time integration schemes are required for simulation of dynamic peeling problems. In the present work, a composite time integration scheme is proposed for the simulation of dynamic adhesive peeling problems. It is shown through numerical examples that the proposed scheme remains stable and also has some gain in accuracy. The performance of the scheme is compared with two collocation-based schemes, i.e., Newmark scheme and Bathe composite scheme. It is shown that the proposed scheme and Bathe composite scheme perform equally. However, the proposed scheme adds very little to the computational cost of Newmark scheme. Through a numerical simulation of the peeling of a gecko spatula from a rigid substrate it is shown that the proposed scheme and the Bathe composite scheme are able to simulate the complete peeling process for given time step whereas the Newmark scheme diverges. It is also shown that the maximum pull-off force is within the range reported in the literature.


2015 ◽  
Vol 87 (2) ◽  
pp. 1195-1232 ◽  
Author(s):  
João M. Vedovoto ◽  
Ricardo Serfaty ◽  
Aristeu Da Silveira Neto

The present work is devoted to the development and implementation of a computational framework to perform numerical simulations of low Mach number turbulent flows over complex geometries. The algorithm under consideration is based on a classical predictor-corrector time integration scheme that employs a projection method for the momentum equations. The domain decomposition strategy is adopted for distributed computing, displaying very satisfactory levels of speed-up and efficiency. The Immersed Boundary Methodology is used to characterize the presence of a complex geometry. Such method demands two separate grids: An Eulerian, where the transport equations are solved with a Finite Volume, second order discretization and a Lagrangian domain, represented by a non-structured shell grid representing the immersed geometry. The in-house code developed was fully verified by the Method of Manufactured Solu- tions, in both Eulerian and Lagrangian domains. The capabilities of the resulting computational framework are illustrated on four distinct cases: a turbulent jet, the Poiseuille flow, as a matter of validation of the implemented Immersed Boundary methodology, the flow over a sphere covering a wide range of Reynolds numbers, and finally, with the intention of demonstrating the applicability of Large Eddy Simulations - LES - in an industrial problem, the turbulent flow inside an industrial fan.


Author(s):  
A. Bahtui ◽  
H. Bahai ◽  
G. Alfano

This paper presents an analytical formulation and a finite element analysis of the behavior of multilayer unbonded flexible risers. The finite element model accurately incorporates all the fine details of the riser that were previously considered to be important but too difficult to simulate due to the significant associated computational cost. All layers of the riser are separately modeled, and contact interaction between layers has been accounted for. The model includes geometric nonlinearity as well as frictional effects. The analysis considers the main modes of flexible riser loading, which include internal and external pressures, axial tension, torsion, and bending. Computations were performed by employing a fully explicit time integration scheme on a parallel 16-processor cluster of computers. Consistency of simulation results was demonstrated by comparison with those of the analytical model of an identical structure. The close agreement gives confidence in both approaches.


2013 ◽  
Vol 2013 ◽  
pp. 1-21 ◽  
Author(s):  
Rita Greco ◽  
Francesco Trentadue

Response sensitivity evaluation is an important element in reliability evaluation and design optimization of structural systems. It has been widely studied under static and dynamic forcing conditions with deterministic input data. In this paper, structural response and reliability sensitivities are determined by means of the time domain covariance analysis in both classically and nonclassically damped linear structural systems. A time integration scheme is proposed for covariance sensitivity. A modulated, filtered, white noise input process is adopted to model the stochastic nonstationary loads. The method allows for the evaluation of sensitivity statistics of different quantities of dynamic response with respect to structural parameters. Finally, numerical examples are presented regarding a multistorey shear frame building.


2020 ◽  
Vol 372 ◽  
pp. 113395 ◽  
Author(s):  
R. Ortigosa ◽  
A.J. Gil ◽  
J. Martínez-Frutos ◽  
M. Franke ◽  
J. Bonet

2021 ◽  
Vol 245 ◽  
pp. 106433
Author(s):  
Mohammad Mahdi Malakiyeh ◽  
Saeed Shojaee ◽  
Saleh Hamzehei-Javaran ◽  
Klaus-Jürgen Bathe

PAMM ◽  
2018 ◽  
Vol 18 (1) ◽  
Author(s):  
Alexander Janz ◽  
Peter Betsch ◽  
Marlon Franke ◽  
Rogelio Ortigosa

1981 ◽  
Vol 103 (4) ◽  
pp. 657-664 ◽  
Author(s):  
H. U. Akay ◽  
A. Ecer

Analysis of transonic flow through a cascade of airfoils is investigated using the finite element method. Development of a computational grid suitable for complex flow structures and different types of boundary conditions is presented. An efficient pseudo-time integration scheme is developed for the solution of equations. Modeling of the shock and the convergence characteristics of the developed scheme are discussed. Numerical results include a 45 deg staggered cascade of NACA 0012 airfoils with inlet flow Mach number of 0.8 and angles of attack 1, 0, and −1 deg.


Sign in / Sign up

Export Citation Format

Share Document